Checking spring sag
#2
Guest
Posts: n/a
Re: Checking spring sag
Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
just write this? :p
noneofyourbusiness wrote:
> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
> to measure the current ride height and compare it to the factory spec.
>
> Can someone point me to a resource that shows this type of data?
>
> TIA
>
> ...
just write this? :p
noneofyourbusiness wrote:
> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
> to measure the current ride height and compare it to the factory spec.
>
> Can someone point me to a resource that shows this type of data?
>
> TIA
>
> ...
#3
Guest
Posts: n/a
Re: Checking spring sag
Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
just write this? :p
noneofyourbusiness wrote:
> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
> to measure the current ride height and compare it to the factory spec.
>
> Can someone point me to a resource that shows this type of data?
>
> TIA
>
> ...
just write this? :p
noneofyourbusiness wrote:
> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
> to measure the current ride height and compare it to the factory spec.
>
> Can someone point me to a resource that shows this type of data?
>
> TIA
>
> ...
#4
Guest
Posts: n/a
Re: Checking spring sag
Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
just write this? :p
noneofyourbusiness wrote:
> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
> to measure the current ride height and compare it to the factory spec.
>
> Can someone point me to a resource that shows this type of data?
>
> TIA
>
> ...
just write this? :p
noneofyourbusiness wrote:
> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
> to measure the current ride height and compare it to the factory spec.
>
> Can someone point me to a resource that shows this type of data?
>
> TIA
>
> ...
#5
Guest
Posts: n/a
Re: Checking spring sag
On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
<greg.mergner@REMOVEgmail.com> wrote:
>Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>just write this? :p
>
Dunno..I googled, but didnt see anything for an XJ, just TJs
Thanks
....
>noneofyourbusiness wrote:
>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>> to measure the current ride height and compare it to the factory spec.
>>
>> Can someone point me to a resource that shows this type of data?
>>
>> TIA
>>
>> ...
<greg.mergner@REMOVEgmail.com> wrote:
>Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>just write this? :p
>
Dunno..I googled, but didnt see anything for an XJ, just TJs
Thanks
....
>noneofyourbusiness wrote:
>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>> to measure the current ride height and compare it to the factory spec.
>>
>> Can someone point me to a resource that shows this type of data?
>>
>> TIA
>>
>> ...
#6
Guest
Posts: n/a
Re: Checking spring sag
On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
<greg.mergner@REMOVEgmail.com> wrote:
>Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>just write this? :p
>
Dunno..I googled, but didnt see anything for an XJ, just TJs
Thanks
....
>noneofyourbusiness wrote:
>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>> to measure the current ride height and compare it to the factory spec.
>>
>> Can someone point me to a resource that shows this type of data?
>>
>> TIA
>>
>> ...
<greg.mergner@REMOVEgmail.com> wrote:
>Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>just write this? :p
>
Dunno..I googled, but didnt see anything for an XJ, just TJs
Thanks
....
>noneofyourbusiness wrote:
>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>> to measure the current ride height and compare it to the factory spec.
>>
>> Can someone point me to a resource that shows this type of data?
>>
>> TIA
>>
>> ...
#7
Guest
Posts: n/a
Re: Checking spring sag
On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
<greg.mergner@REMOVEgmail.com> wrote:
>Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>just write this? :p
>
Dunno..I googled, but didnt see anything for an XJ, just TJs
Thanks
....
>noneofyourbusiness wrote:
>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>> to measure the current ride height and compare it to the factory spec.
>>
>> Can someone point me to a resource that shows this type of data?
>>
>> TIA
>>
>> ...
<greg.mergner@REMOVEgmail.com> wrote:
>Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>just write this? :p
>
Dunno..I googled, but didnt see anything for an XJ, just TJs
Thanks
....
>noneofyourbusiness wrote:
>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>> to measure the current ride height and compare it to the factory spec.
>>
>> Can someone point me to a resource that shows this type of data?
>>
>> TIA
>>
>> ...
#8
Guest
Posts: n/a
Re: Checking spring sag
I was joking, two seconds before your thread appeared, I had written the
same for another. Hence the 'silly' smiley face/tongue out thingy, and
everyone had a good laugh...
You're welcome though.
noneofyourbusiness wrote:
> On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
> <greg.mergner@REMOVEgmail.com> wrote:
>
>> Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>> just write this? :p
>>
>
> Dunno..I googled, but didnt see anything for an XJ, just TJs
> Thanks
>
> ...
>
>> noneofyourbusiness wrote:
>>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>>> to measure the current ride height and compare it to the factory spec.
>>>
>>> Can someone point me to a resource that shows this type of data?
>>>
>>> TIA
>>>
>>> ...
same for another. Hence the 'silly' smiley face/tongue out thingy, and
everyone had a good laugh...
You're welcome though.
noneofyourbusiness wrote:
> On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
> <greg.mergner@REMOVEgmail.com> wrote:
>
>> Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>> just write this? :p
>>
>
> Dunno..I googled, but didnt see anything for an XJ, just TJs
> Thanks
>
> ...
>
>> noneofyourbusiness wrote:
>>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>>> to measure the current ride height and compare it to the factory spec.
>>>
>>> Can someone point me to a resource that shows this type of data?
>>>
>>> TIA
>>>
>>> ...
#9
Guest
Posts: n/a
Re: Checking spring sag
I was joking, two seconds before your thread appeared, I had written the
same for another. Hence the 'silly' smiley face/tongue out thingy, and
everyone had a good laugh...
You're welcome though.
noneofyourbusiness wrote:
> On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
> <greg.mergner@REMOVEgmail.com> wrote:
>
>> Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>> just write this? :p
>>
>
> Dunno..I googled, but didnt see anything for an XJ, just TJs
> Thanks
>
> ...
>
>> noneofyourbusiness wrote:
>>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>>> to measure the current ride height and compare it to the factory spec.
>>>
>>> Can someone point me to a resource that shows this type of data?
>>>
>>> TIA
>>>
>>> ...
same for another. Hence the 'silly' smiley face/tongue out thingy, and
everyone had a good laugh...
You're welcome though.
noneofyourbusiness wrote:
> On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
> <greg.mergner@REMOVEgmail.com> wrote:
>
>> Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>> just write this? :p
>>
>
> Dunno..I googled, but didnt see anything for an XJ, just TJs
> Thanks
>
> ...
>
>> noneofyourbusiness wrote:
>>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>>> to measure the current ride height and compare it to the factory spec.
>>>
>>> Can someone point me to a resource that shows this type of data?
>>>
>>> TIA
>>>
>>> ...
#10
Guest
Posts: n/a
Re: Checking spring sag
I was joking, two seconds before your thread appeared, I had written the
same for another. Hence the 'silly' smiley face/tongue out thingy, and
everyone had a good laugh...
You're welcome though.
noneofyourbusiness wrote:
> On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
> <greg.mergner@REMOVEgmail.com> wrote:
>
>> Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>> just write this? :p
>>
>
> Dunno..I googled, but didnt see anything for an XJ, just TJs
> Thanks
>
> ...
>
>> noneofyourbusiness wrote:
>>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>>> to measure the current ride height and compare it to the factory spec.
>>>
>>> Can someone point me to a resource that shows this type of data?
>>>
>>> TIA
>>>
>>> ...
same for another. Hence the 'silly' smiley face/tongue out thingy, and
everyone had a good laugh...
You're welcome though.
noneofyourbusiness wrote:
> On Mon, 12 Mar 2007 19:27:32 -0400, The Merg
> <greg.mergner@REMOVEgmail.com> wrote:
>
>> Axle tube to bottom of fender flare, 17" rear, 17 1/2" front...didn't I
>> just write this? :p
>>
>
> Dunno..I googled, but didnt see anything for an XJ, just TJs
> Thanks
>
> ...
>
>> noneofyourbusiness wrote:
>>> Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want
>>> to measure the current ride height and compare it to the factory spec.
>>>
>>> Can someone point me to a resource that shows this type of data?
>>>
>>> TIA
>>>
>>> ...