steering shaft.
#11
Guest
Posts: n/a
Re: steering shaft.
ok, sounds good
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
#12
Guest
Posts: n/a
Re: steering shaft.
ok, sounds good
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
#13
Guest
Posts: n/a
Re: steering shaft.
ok, sounds good
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)