steering shaft.
06-16-2005, 03:53 PM
#1
Guest
Posts: n/a
steering shaft.
ok, so my steering shaft is dangerously pooched. I found out that they are
about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
give a used one a try first to see if I can some life out of it.
my question is...Are these as straight forward to change as they look? id
there anything I should keep in mind when changing it?
thanks
about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
give a used one a try first to see if I can some life out of it.
my question is...Are these as straight forward to change as they look? id
there anything I should keep in mind when changing it?
thanks
06-16-2005, 04:13 PM
#2
Guest
Posts: n/a
Re: steering shaft.
Jeep YJ, 89 - power steering
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
06-16-2005, 04:13 PM
#3
Guest
Posts: n/a
Re: steering shaft.
Jeep YJ, 89 - power steering
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
06-16-2005, 04:13 PM
#4
Guest
Posts: n/a
Re: steering shaft.
Jeep YJ, 89 - power steering
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
06-16-2005, 04:13 PM
#5
Guest
Posts: n/a
Re: steering shaft.
Jeep YJ, 89 - power steering
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:SMkse.75347$tt5.63774@edtnps90...
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
>
>
06-16-2005, 04:32 PM
#6
Guest
Posts: n/a
Re: steering shaft.
Straight forward, leaving one loose bolt to hold the steering box
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
06-16-2005, 04:32 PM
#7
Guest
Posts: n/a
Re: steering shaft.
Straight forward, leaving one loose bolt to hold the steering box
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
06-16-2005, 04:32 PM
#8
Guest
Posts: n/a
Re: steering shaft.
Straight forward, leaving one loose bolt to hold the steering box
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
06-16-2005, 04:32 PM
#9
Guest
Posts: n/a
Re: steering shaft.
Straight forward, leaving one loose bolt to hold the steering box
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
to tilt down will give another hand on assembly, usually takes a bunch
of tries to get the spline correct so it'll slide on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Pi-Eyed Piper wrote:
>
> ok, so my steering shaft is dangerously pooched. I found out that they are
> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
> give a used one a try first to see if I can some life out of it.
>
> my question is...Are these as straight forward to change as they look? id
> there anything I should keep in mind when changing it?
>
> thanks
06-16-2005, 04:38 PM
#10
Guest
Posts: n/a
Re: steering shaft.
ok, sounds good
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42B1E1F7.8050BE69@***.net...
> Straight forward, leaving one loose bolt to hold the steering box
> to tilt down will give another hand on assembly, usually takes a bunch
> of tries to get the spline correct so it'll slide on.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Pi-Eyed Piper wrote:
>>
>> ok, so my steering shaft is dangerously pooched. I found out that they
>> are
>> about $200CAD new. There is a Jeep wrecker that has a bunch for $50, I'll
>> give a used one a try first to see if I can some life out of it.
>>
>> my question is...Are these as straight forward to change as they look? id
>> there anything I should keep in mind when changing it?
>>
>> thanks
