is the steering box shaft tapered?
04-21-2004, 11:49 AM
#1
Guest
Posts: n/a
is the steering box shaft tapered?
hey guys-here's a quick one-is the shaft on a saginaw steering box
tapered? the one where the pitman arm goes on. i didn't get a chance
to look at mine this morning. can one install the pitman arm upside
down? thanks! 85 cj7 with power steering....
tapered? the one where the pitman arm goes on. i didn't get a chance
to look at mine this morning. can one install the pitman arm upside
down? thanks! 85 cj7 with power steering....
04-21-2004, 02:25 PM
#2
Guest
Posts: n/a
Re: is the steering box shaft tapered?
Tapered. Use an old full sized Bronco if you need an another couple
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
04-21-2004, 02:25 PM
#3
Guest
Posts: n/a
Re: is the steering box shaft tapered?
Tapered. Use an old full sized Bronco if you need an another couple
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
04-21-2004, 02:25 PM
#4
Guest
Posts: n/a
Re: is the steering box shaft tapered?
Tapered. Use an old full sized Bronco if you need an another couple
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
04-21-2004, 02:25 PM
#5
Guest
Posts: n/a
Re: is the steering box shaft tapered?
Tapered. Use an old full sized Bronco if you need an another couple
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
of inches drop without losing turning radius.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
04-21-2004, 03:25 PM
#6
Guest
Posts: n/a
Re: is the steering box shaft tapered?
thanks!
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
04-21-2004, 03:25 PM
#7
Guest
Posts: n/a
Re: is the steering box shaft tapered?
thanks!
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
04-21-2004, 03:25 PM
#8
Guest
Posts: n/a
Re: is the steering box shaft tapered?
thanks!
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
04-21-2004, 03:25 PM
#9
Guest
Posts: n/a
Re: is the steering box shaft tapered?
thanks!
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4086BC9A.9A26C395@***.net...
> Tapered. Use an old full sized Bronco if you need an another couple
> of inches drop without losing turning radius.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
> >
> > hey guys-here's a quick one-is the shaft on a saginaw steering box
> > tapered? the one where the pitman arm goes on. i didn't get a chance
> > to look at mine this morning. can one install the pitman arm upside
> > down? thanks! 85 cj7 with power steering....
04-23-2004, 11:33 PM
#10
Guest
Posts: n/a
Re: is the steering box shaft tapered?
Pretty sure it has a single spline blocked off but can't remember for sure
about a taper. I wanna say, no, but I can't with any certainty. The real
reason I'm responding is out of curiosity. Do you want to mount upside down
and why? Or, are you just checking to see if someone accidentally put it on
wrong?
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"serg" <sfon@yahoo.com> wrote in message
news:934d0785.0404210749.f969bd2@posting.google.co m...
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
about a taper. I wanna say, no, but I can't with any certainty. The real
reason I'm responding is out of curiosity. Do you want to mount upside down
and why? Or, are you just checking to see if someone accidentally put it on
wrong?
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"serg" <sfon@yahoo.com> wrote in message
news:934d0785.0404210749.f969bd2@posting.google.co m...
> hey guys-here's a quick one-is the shaft on a saginaw steering box
> tapered? the one where the pitman arm goes on. i didn't get a chance
> to look at mine this morning. can one install the pitman arm upside
> down? thanks! 85 cj7 with power steering....
