Steering Bell Crank and parts 1967 CJ5 V6
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
http://www.vintagejeepparts.com/Parts_Steering_02.asp
Above is a link, see the diagram toward the bottom. I will need all it's
pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
suggested.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C60707.31724863@sympatico.ca:
> I am having a hard time figuring out what you are looking for.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Bomber wrote:
>>
>> Great afternoon all!
>>
>> I need to replace my steering bell crank. It's pretty much toast.
>> It has a 7/8" shaft though I cannot seem to find any parts that are
>> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
>> same as the V6??
>>
>> Does anyone have a good source? I know I can get them (4cyl, 7/8")
>> from a number of different places, I am just curious about your
>> personal experiences.
>>
>> Does anyone have one complete and in good shape you'd like to get rid
>> of??
>>
>> Thanks
>>
>> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
http://www.vintagejeepparts.com/Parts_Steering_02.asp
Above is a link, see the diagram toward the bottom. I will need all it's
pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
suggested.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C60707.31724863@sympatico.ca:
> I am having a hard time figuring out what you are looking for.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Bomber wrote:
>>
>> Great afternoon all!
>>
>> I need to replace my steering bell crank. It's pretty much toast.
>> It has a 7/8" shaft though I cannot seem to find any parts that are
>> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
>> same as the V6??
>>
>> Does anyone have a good source? I know I can get them (4cyl, 7/8")
>> from a number of different places, I am just curious about your
>> personal experiences.
>>
>> Does anyone have one complete and in good shape you'd like to get rid
>> of??
>>
>> Thanks
>>
>> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
http://www.vintagejeepparts.com/Parts_Steering_02.asp
Above is a link, see the diagram toward the bottom. I will need all it's
pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
suggested.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C60707.31724863@sympatico.ca:
> I am having a hard time figuring out what you are looking for.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Bomber wrote:
>>
>> Great afternoon all!
>>
>> I need to replace my steering bell crank. It's pretty much toast.
>> It has a 7/8" shaft though I cannot seem to find any parts that are
>> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
>> same as the V6??
>>
>> Does anyone have a good source? I know I can get them (4cyl, 7/8")
>> from a number of different places, I am just curious about your
>> personal experiences.
>>
>> Does anyone have one complete and in good shape you'd like to get rid
>> of??
>>
>> Thanks
>>
>> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Unless it specifies a limit on the engine for the part, you have no
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Unless it specifies a limit on the engine for the part, you have no
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Unless it specifies a limit on the engine for the part, you have no
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Unless it specifies a limit on the engine for the part, you have no
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
worries. If it is for a '48 to '71 like it says, it is just that.
Mike
Bomber wrote:
>
> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>
> Above is a link, see the diagram toward the bottom. I will need all it's
> pieces (3 and 3A), assuming I don't go with the Saginaw setup as Bill has
> suggested.
>
> Stephen B.
>
> Mike Romain <romainm@sympatico.ca> wrote in
> news:40C60707.31724863@sympatico.ca:
>
> > I am having a hard time figuring out what you are looking for.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Bomber wrote:
> >>
> >> Great afternoon all!
> >>
> >> I need to replace my steering bell crank. It's pretty much toast.
> >> It has a 7/8" shaft though I cannot seem to find any parts that are
> >> for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft the
> >> same as the V6??
> >>
> >> Does anyone have a good source? I know I can get them (4cyl, 7/8")
> >> from a number of different places, I am just curious about your
> >> personal experiences.
> >>
> >> Does anyone have one complete and in good shape you'd like to get rid
> >> of??
> >>
> >> Thanks
> >>
> >> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Thanks... I didn't even notice that this site didn't specify the engine
size like the other ones I've been too... silly me.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C63644.BA30A520@sympatico.ca:
> Unless it specifies a limit on the engine for the part, you have no
> worries. If it is for a '48 to '71 like it says, it is just that.
>
> Mike
>
> Bomber wrote:
>>
>> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>>
>> Above is a link, see the diagram toward the bottom. I will need all
>> it's pieces (3 and 3A), assuming I don't go with the Saginaw setup as
>> Bill has suggested.
>>
>> Stephen B.
>>
>> Mike Romain <romainm@sympatico.ca> wrote in
>> news:40C60707.31724863@sympatico.ca:
>>
>> > I am having a hard time figuring out what you are looking for.
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Bomber wrote:
>> >>
>> >> Great afternoon all!
>> >>
>> >> I need to replace my steering bell crank. It's pretty much toast.
>> >> It has a 7/8" shaft though I cannot seem to find any parts that
>> >> are for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft
>> >> the same as the V6??
>> >>
>> >> Does anyone have a good source? I know I can get them (4cyl,
>> >> 7/8") from a number of different places, I am just curious about
>> >> your personal experiences.
>> >>
>> >> Does anyone have one complete and in good shape you'd like to get
>> >> rid of??
>> >>
>> >> Thanks
>> >>
>> >> Bomber
size like the other ones I've been too... silly me.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C63644.BA30A520@sympatico.ca:
> Unless it specifies a limit on the engine for the part, you have no
> worries. If it is for a '48 to '71 like it says, it is just that.
>
> Mike
>
> Bomber wrote:
>>
>> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>>
>> Above is a link, see the diagram toward the bottom. I will need all
>> it's pieces (3 and 3A), assuming I don't go with the Saginaw setup as
>> Bill has suggested.
>>
>> Stephen B.
>>
>> Mike Romain <romainm@sympatico.ca> wrote in
>> news:40C60707.31724863@sympatico.ca:
>>
>> > I am having a hard time figuring out what you are looking for.
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Bomber wrote:
>> >>
>> >> Great afternoon all!
>> >>
>> >> I need to replace my steering bell crank. It's pretty much toast.
>> >> It has a 7/8" shaft though I cannot seem to find any parts that
>> >> are for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft
>> >> the same as the V6??
>> >>
>> >> Does anyone have a good source? I know I can get them (4cyl,
>> >> 7/8") from a number of different places, I am just curious about
>> >> your personal experiences.
>> >>
>> >> Does anyone have one complete and in good shape you'd like to get
>> >> rid of??
>> >>
>> >> Thanks
>> >>
>> >> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Thanks... I didn't even notice that this site didn't specify the engine
size like the other ones I've been too... silly me.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C63644.BA30A520@sympatico.ca:
> Unless it specifies a limit on the engine for the part, you have no
> worries. If it is for a '48 to '71 like it says, it is just that.
>
> Mike
>
> Bomber wrote:
>>
>> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>>
>> Above is a link, see the diagram toward the bottom. I will need all
>> it's pieces (3 and 3A), assuming I don't go with the Saginaw setup as
>> Bill has suggested.
>>
>> Stephen B.
>>
>> Mike Romain <romainm@sympatico.ca> wrote in
>> news:40C60707.31724863@sympatico.ca:
>>
>> > I am having a hard time figuring out what you are looking for.
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Bomber wrote:
>> >>
>> >> Great afternoon all!
>> >>
>> >> I need to replace my steering bell crank. It's pretty much toast.
>> >> It has a 7/8" shaft though I cannot seem to find any parts that
>> >> are for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft
>> >> the same as the V6??
>> >>
>> >> Does anyone have a good source? I know I can get them (4cyl,
>> >> 7/8") from a number of different places, I am just curious about
>> >> your personal experiences.
>> >>
>> >> Does anyone have one complete and in good shape you'd like to get
>> >> rid of??
>> >>
>> >> Thanks
>> >>
>> >> Bomber
size like the other ones I've been too... silly me.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C63644.BA30A520@sympatico.ca:
> Unless it specifies a limit on the engine for the part, you have no
> worries. If it is for a '48 to '71 like it says, it is just that.
>
> Mike
>
> Bomber wrote:
>>
>> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>>
>> Above is a link, see the diagram toward the bottom. I will need all
>> it's pieces (3 and 3A), assuming I don't go with the Saginaw setup as
>> Bill has suggested.
>>
>> Stephen B.
>>
>> Mike Romain <romainm@sympatico.ca> wrote in
>> news:40C60707.31724863@sympatico.ca:
>>
>> > I am having a hard time figuring out what you are looking for.
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Bomber wrote:
>> >>
>> >> Great afternoon all!
>> >>
>> >> I need to replace my steering bell crank. It's pretty much toast.
>> >> It has a 7/8" shaft though I cannot seem to find any parts that
>> >> are for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft
>> >> the same as the V6??
>> >>
>> >> Does anyone have a good source? I know I can get them (4cyl,
>> >> 7/8") from a number of different places, I am just curious about
>> >> your personal experiences.
>> >>
>> >> Does anyone have one complete and in good shape you'd like to get
>> >> rid of??
>> >>
>> >> Thanks
>> >>
>> >> Bomber
Guest
Posts: n/a
Re: Steering Bell Crank and parts 1967 CJ5 V6
Thanks... I didn't even notice that this site didn't specify the engine
size like the other ones I've been too... silly me.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C63644.BA30A520@sympatico.ca:
> Unless it specifies a limit on the engine for the part, you have no
> worries. If it is for a '48 to '71 like it says, it is just that.
>
> Mike
>
> Bomber wrote:
>>
>> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>>
>> Above is a link, see the diagram toward the bottom. I will need all
>> it's pieces (3 and 3A), assuming I don't go with the Saginaw setup as
>> Bill has suggested.
>>
>> Stephen B.
>>
>> Mike Romain <romainm@sympatico.ca> wrote in
>> news:40C60707.31724863@sympatico.ca:
>>
>> > I am having a hard time figuring out what you are looking for.
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Bomber wrote:
>> >>
>> >> Great afternoon all!
>> >>
>> >> I need to replace my steering bell crank. It's pretty much toast.
>> >> It has a 7/8" shaft though I cannot seem to find any parts that
>> >> are for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft
>> >> the same as the V6??
>> >>
>> >> Does anyone have a good source? I know I can get them (4cyl,
>> >> 7/8") from a number of different places, I am just curious about
>> >> your personal experiences.
>> >>
>> >> Does anyone have one complete and in good shape you'd like to get
>> >> rid of??
>> >>
>> >> Thanks
>> >>
>> >> Bomber
size like the other ones I've been too... silly me.
Stephen B.
Mike Romain <romainm@sympatico.ca> wrote in
news:40C63644.BA30A520@sympatico.ca:
> Unless it specifies a limit on the engine for the part, you have no
> worries. If it is for a '48 to '71 like it says, it is just that.
>
> Mike
>
> Bomber wrote:
>>
>> http://www.vintagejeepparts.com/Parts_Steering_02.asp
>>
>> Above is a link, see the diagram toward the bottom. I will need all
>> it's pieces (3 and 3A), assuming I don't go with the Saginaw setup as
>> Bill has suggested.
>>
>> Stephen B.
>>
>> Mike Romain <romainm@sympatico.ca> wrote in
>> news:40C60707.31724863@sympatico.ca:
>>
>> > I am having a hard time figuring out what you are looking for.
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Bomber wrote:
>> >>
>> >> Great afternoon all!
>> >>
>> >> I need to replace my steering bell crank. It's pretty much toast.
>> >> It has a 7/8" shaft though I cannot seem to find any parts that
>> >> are for the V6 version of my Jeep. Is the 4 cylinder, 7/8" shaft
>> >> the same as the V6??
>> >>
>> >> Does anyone have a good source? I know I can get them (4cyl,
>> >> 7/8") from a number of different places, I am just curious about
>> >> your personal experiences.
>> >>
>> >> Does anyone have one complete and in good shape you'd like to get
>> >> rid of??
>> >>
>> >> Thanks
>> >>
>> >> Bomber
