Slip Yoke Eliminator
11-01-2003, 10:00 PM
#251
Guest
Posts: n/a
Re: Slip Yoke Eliminator
Yeah, right. Prove I don't see something... :-P
You prove it. :-)
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"4x4" in caps is "$X$"
"bllsht" <nospam@invaliddot.net> wrote in message
news:t7o8qvcbmbsgudap7i9c90hb65omd2qfnp@4ax.com...
> In message <L8idnYM0lIjq1zmiRVn-vg@comcast.com>, "TJim" wrote:
>
> >Bzzzzzt! Nope! The only posts I see that L.W. generates are the ones
that
> >are included in the responses.
>
> Prove it.
>
> I wouldn't normally bother with his tripe,
> >but I find the fact that it seems to be L.W. vs. everyone else. LOL!
> >
> >--
> >Jim
>
You prove it. :-)
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"4x4" in caps is "$X$"
"bllsht" <nospam@invaliddot.net> wrote in message
news:t7o8qvcbmbsgudap7i9c90hb65omd2qfnp@4ax.com...
> In message <L8idnYM0lIjq1zmiRVn-vg@comcast.com>, "TJim" wrote:
>
> >Bzzzzzt! Nope! The only posts I see that L.W. generates are the ones
that
> >are included in the responses.
>
> Prove it.
>
> I wouldn't normally bother with his tripe,
> >but I find the fact that it seems to be L.W. vs. everyone else. LOL!
> >
> >--
> >Jim
>
11-01-2003, 10:00 PM
#252
Guest
Posts: n/a
Re: Slip Yoke Eliminator
Yeah, right. Prove I don't see something... :-P
You prove it. :-)
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"4x4" in caps is "$X$"
"bllsht" <nospam@invaliddot.net> wrote in message
news:t7o8qvcbmbsgudap7i9c90hb65omd2qfnp@4ax.com...
> In message <L8idnYM0lIjq1zmiRVn-vg@comcast.com>, "TJim" wrote:
>
> >Bzzzzzt! Nope! The only posts I see that L.W. generates are the ones
that
> >are included in the responses.
>
> Prove it.
>
> I wouldn't normally bother with his tripe,
> >but I find the fact that it seems to be L.W. vs. everyone else. LOL!
> >
> >--
> >Jim
>
You prove it. :-)
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"4x4" in caps is "$X$"
"bllsht" <nospam@invaliddot.net> wrote in message
news:t7o8qvcbmbsgudap7i9c90hb65omd2qfnp@4ax.com...
> In message <L8idnYM0lIjq1zmiRVn-vg@comcast.com>, "TJim" wrote:
>
> >Bzzzzzt! Nope! The only posts I see that L.W. generates are the ones
that
> >are included in the responses.
>
> Prove it.
>
> I wouldn't normally bother with his tripe,
> >but I find the fact that it seems to be L.W. vs. everyone else. LOL!
> >
> >--
> >Jim
>
11-01-2003, 10:00 PM
#253
Guest
Posts: n/a
Re: Slip Yoke Eliminator
Yeah, right. Prove I don't see something... :-P
You prove it. :-)
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"4x4" in caps is "$X$"
"bllsht" <nospam@invaliddot.net> wrote in message
news:t7o8qvcbmbsgudap7i9c90hb65omd2qfnp@4ax.com...
> In message <L8idnYM0lIjq1zmiRVn-vg@comcast.com>, "TJim" wrote:
>
> >Bzzzzzt! Nope! The only posts I see that L.W. generates are the ones
that
> >are included in the responses.
>
> Prove it.
>
> I wouldn't normally bother with his tripe,
> >but I find the fact that it seems to be L.W. vs. everyone else. LOL!
> >
> >--
> >Jim
>
You prove it. :-)
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"4x4" in caps is "$X$"
"bllsht" <nospam@invaliddot.net> wrote in message
news:t7o8qvcbmbsgudap7i9c90hb65omd2qfnp@4ax.com...
> In message <L8idnYM0lIjq1zmiRVn-vg@comcast.com>, "TJim" wrote:
>
> >Bzzzzzt! Nope! The only posts I see that L.W. generates are the ones
that
> >are included in the responses.
>
> Prove it.
>
> I wouldn't normally bother with his tripe,
> >but I find the fact that it seems to be L.W. vs. everyone else. LOL!
> >
> >--
> >Jim
>
11-01-2003, 10:03 PM
#254
Guest
Posts: n/a
Re: Slip Yoke Eliminator
Yup, makes me feel like Superman, fighting for right, and the
American way: http://www.superman.com.ar/superman.wav
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TJim wrote:
>
> OK, I need to review what I write before I hit the "send" button...
> "I find the fact that it seems to be L.W. vs. everyone else" quite amusing.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
American way: http://www.superman.com.ar/superman.wav
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TJim wrote:
>
> OK, I need to review what I write before I hit the "send" button...
> "I find the fact that it seems to be L.W. vs. everyone else" quite amusing.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
11-01-2003, 10:03 PM
#255
Guest
Posts: n/a
Re: Slip Yoke Eliminator
Yup, makes me feel like Superman, fighting for right, and the
American way: http://www.superman.com.ar/superman.wav
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TJim wrote:
>
> OK, I need to review what I write before I hit the "send" button...
> "I find the fact that it seems to be L.W. vs. everyone else" quite amusing.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
American way: http://www.superman.com.ar/superman.wav
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TJim wrote:
>
> OK, I need to review what I write before I hit the "send" button...
> "I find the fact that it seems to be L.W. vs. everyone else" quite amusing.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
11-01-2003, 10:03 PM
#256
Guest
Posts: n/a
Re: Slip Yoke Eliminator
Yup, makes me feel like Superman, fighting for right, and the
American way: http://www.superman.com.ar/superman.wav
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TJim wrote:
>
> OK, I need to review what I write before I hit the "send" button...
> "I find the fact that it seems to be L.W. vs. everyone else" quite amusing.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
American way: http://www.superman.com.ar/superman.wav
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
TJim wrote:
>
> OK, I need to review what I write before I hit the "send" button...
> "I find the fact that it seems to be L.W. vs. everyone else" quite amusing.
>
> --
> Jim
> --
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
> "You can do any job in the world with the wrong tool if you try hard
> enough..."
> "4x4" in caps is "$X$"
11-02-2003, 01:32 AM
#257
Guest
Posts: n/a
Re: Slip Yoke Eliminator
In article <3fa45e97_1@newspeer2.tds.net>, "belowme" <dontbotherme@nospam.com>
writes:
>I suspect that AA and JB are pretty comparable units. Did ya have to get a
>driveshaft measurement to give them over the phone, or is it something that
>they already know based on the vehicle build? One website I visited talked
>about measuring from the rear case to the rear axle pinion.
Once the lift was installed, I measured for the new 'shaft and called it in.
IIRC they asked for the measurement from the stock rear seal retainer to the
center of the pinion U-joint cross. They's tell you from where to reference
your measurement.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>I suspect that AA and JB are pretty comparable units. Did ya have to get a
>driveshaft measurement to give them over the phone, or is it something that
>they already know based on the vehicle build? One website I visited talked
>about measuring from the rear case to the rear axle pinion.
Once the lift was installed, I measured for the new 'shaft and called it in.
IIRC they asked for the measurement from the stock rear seal retainer to the
center of the pinion U-joint cross. They's tell you from where to reference
your measurement.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
11-02-2003, 01:32 AM
#258
Guest
Posts: n/a
Re: Slip Yoke Eliminator
In article <3fa45e97_1@newspeer2.tds.net>, "belowme" <dontbotherme@nospam.com>
writes:
>I suspect that AA and JB are pretty comparable units. Did ya have to get a
>driveshaft measurement to give them over the phone, or is it something that
>they already know based on the vehicle build? One website I visited talked
>about measuring from the rear case to the rear axle pinion.
Once the lift was installed, I measured for the new 'shaft and called it in.
IIRC they asked for the measurement from the stock rear seal retainer to the
center of the pinion U-joint cross. They's tell you from where to reference
your measurement.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>I suspect that AA and JB are pretty comparable units. Did ya have to get a
>driveshaft measurement to give them over the phone, or is it something that
>they already know based on the vehicle build? One website I visited talked
>about measuring from the rear case to the rear axle pinion.
Once the lift was installed, I measured for the new 'shaft and called it in.
IIRC they asked for the measurement from the stock rear seal retainer to the
center of the pinion U-joint cross. They's tell you from where to reference
your measurement.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
11-02-2003, 01:32 AM
#259
Guest
Posts: n/a
Re: Slip Yoke Eliminator
In article <3fa45e97_1@newspeer2.tds.net>, "belowme" <dontbotherme@nospam.com>
writes:
>I suspect that AA and JB are pretty comparable units. Did ya have to get a
>driveshaft measurement to give them over the phone, or is it something that
>they already know based on the vehicle build? One website I visited talked
>about measuring from the rear case to the rear axle pinion.
Once the lift was installed, I measured for the new 'shaft and called it in.
IIRC they asked for the measurement from the stock rear seal retainer to the
center of the pinion U-joint cross. They's tell you from where to reference
your measurement.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>I suspect that AA and JB are pretty comparable units. Did ya have to get a
>driveshaft measurement to give them over the phone, or is it something that
>they already know based on the vehicle build? One website I visited talked
>about measuring from the rear case to the rear axle pinion.
Once the lift was installed, I measured for the new 'shaft and called it in.
IIRC they asked for the measurement from the stock rear seal retainer to the
center of the pinion U-joint cross. They's tell you from where to reference
your measurement.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
11-02-2003, 01:37 AM
#260
Guest
Posts: n/a
Re: Slip Yoke Eliminator
In article <3FA473FC.5E4E5CA0@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Yup, makes me feel like Superman, fighting for right, and the
>American way
In the old George Reeves versions, I don't remember the line being "Truth,
Justice, and the American Way...All According to Bill ------."
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
III <----------@***.net> writes:
>Yup, makes me feel like Superman, fighting for right, and the
>American way
In the old George Reeves versions, I don't remember the line being "Truth,
Justice, and the American Way...All According to Bill ------."
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html