Selling the Scrambler project
#1
Guest
Posts: n/a
Selling the Scrambler project
Hey Everyone,
It looks like i'm going to sell my '82 Scrambler project. It's a
last resort and i'm looking for suggestions on asking price.
It's body and frame are complete, some rust bubbling under doors.
Frame is solid, full steel doors. Black. Before i sell it new floor
pans will be welded in and body mounts / channels replaced. Shackle
reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
calipers, bearing, pads, etc). Power steering, power brakes. Factory
half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
with chevy blower. Locking console with Pioneer cd player and
speakers, also have cb. Dash has factory clock and tach, leather
wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
wheel. Bucket seats with new covers, has rear bench mounted facing
backward. Custom tonneau cover with supports. Rear axle has Superior
1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
wheels.
The planned powertrain swap is included as are the Novak swap parts.
Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
before. Everything fits ok, removed engine and trans to complete
wiring and other under hood details.
Some things needed to finish project:
Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
I hate to part with this, I've owned it for 6 years. It's been a great
toy but my priorities have unexpectedly changed.
Thanks for the help,
Don W
It looks like i'm going to sell my '82 Scrambler project. It's a
last resort and i'm looking for suggestions on asking price.
It's body and frame are complete, some rust bubbling under doors.
Frame is solid, full steel doors. Black. Before i sell it new floor
pans will be welded in and body mounts / channels replaced. Shackle
reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
calipers, bearing, pads, etc). Power steering, power brakes. Factory
half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
with chevy blower. Locking console with Pioneer cd player and
speakers, also have cb. Dash has factory clock and tach, leather
wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
wheel. Bucket seats with new covers, has rear bench mounted facing
backward. Custom tonneau cover with supports. Rear axle has Superior
1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
wheels.
The planned powertrain swap is included as are the Novak swap parts.
Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
before. Everything fits ok, removed engine and trans to complete
wiring and other under hood details.
Some things needed to finish project:
Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
I hate to part with this, I've owned it for 6 years. It's been a great
toy but my priorities have unexpectedly changed.
Thanks for the help,
Don W
#2
Guest
Posts: n/a
Re: Selling the Scrambler project
Where are you located? That makes a difference.
Carl
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1163727827.421082.221350@m7g2000cwm.googlegro ups.com...
> Hey Everyone,
> It looks like i'm going to sell my '82 Scrambler project. It's a
> last resort and i'm looking for suggestions on asking price.
> It's body and frame are complete, some rust bubbling under doors.
> Frame is solid, full steel doors. Black. Before i sell it new floor
> pans will be welded in and body mounts / channels replaced. Shackle
> reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
> upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
> calipers, bearing, pads, etc). Power steering, power brakes. Factory
> half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
> with chevy blower. Locking console with Pioneer cd player and
> speakers, also have cb. Dash has factory clock and tach, leather
> wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
> wheel. Bucket seats with new covers, has rear bench mounted facing
> backward. Custom tonneau cover with supports. Rear axle has Superior
> 1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
> Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
> wheels.
> The planned powertrain swap is included as are the Novak swap parts.
> Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
> Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
> before. Everything fits ok, removed engine and trans to complete
> wiring and other under hood details.
>
> Some things needed to finish project:
> Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
>
> I hate to part with this, I've owned it for 6 years. It's been a great
> toy but my priorities have unexpectedly changed.
>
> Thanks for the help,
> Don W
>
Carl
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1163727827.421082.221350@m7g2000cwm.googlegro ups.com...
> Hey Everyone,
> It looks like i'm going to sell my '82 Scrambler project. It's a
> last resort and i'm looking for suggestions on asking price.
> It's body and frame are complete, some rust bubbling under doors.
> Frame is solid, full steel doors. Black. Before i sell it new floor
> pans will be welded in and body mounts / channels replaced. Shackle
> reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
> upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
> calipers, bearing, pads, etc). Power steering, power brakes. Factory
> half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
> with chevy blower. Locking console with Pioneer cd player and
> speakers, also have cb. Dash has factory clock and tach, leather
> wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
> wheel. Bucket seats with new covers, has rear bench mounted facing
> backward. Custom tonneau cover with supports. Rear axle has Superior
> 1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
> Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
> wheels.
> The planned powertrain swap is included as are the Novak swap parts.
> Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
> Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
> before. Everything fits ok, removed engine and trans to complete
> wiring and other under hood details.
>
> Some things needed to finish project:
> Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
>
> I hate to part with this, I've owned it for 6 years. It's been a great
> toy but my priorities have unexpectedly changed.
>
> Thanks for the help,
> Don W
>
#3
Guest
Posts: n/a
Re: Selling the Scrambler project
Where are you located? That makes a difference.
Carl
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1163727827.421082.221350@m7g2000cwm.googlegro ups.com...
> Hey Everyone,
> It looks like i'm going to sell my '82 Scrambler project. It's a
> last resort and i'm looking for suggestions on asking price.
> It's body and frame are complete, some rust bubbling under doors.
> Frame is solid, full steel doors. Black. Before i sell it new floor
> pans will be welded in and body mounts / channels replaced. Shackle
> reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
> upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
> calipers, bearing, pads, etc). Power steering, power brakes. Factory
> half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
> with chevy blower. Locking console with Pioneer cd player and
> speakers, also have cb. Dash has factory clock and tach, leather
> wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
> wheel. Bucket seats with new covers, has rear bench mounted facing
> backward. Custom tonneau cover with supports. Rear axle has Superior
> 1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
> Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
> wheels.
> The planned powertrain swap is included as are the Novak swap parts.
> Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
> Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
> before. Everything fits ok, removed engine and trans to complete
> wiring and other under hood details.
>
> Some things needed to finish project:
> Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
>
> I hate to part with this, I've owned it for 6 years. It's been a great
> toy but my priorities have unexpectedly changed.
>
> Thanks for the help,
> Don W
>
Carl
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1163727827.421082.221350@m7g2000cwm.googlegro ups.com...
> Hey Everyone,
> It looks like i'm going to sell my '82 Scrambler project. It's a
> last resort and i'm looking for suggestions on asking price.
> It's body and frame are complete, some rust bubbling under doors.
> Frame is solid, full steel doors. Black. Before i sell it new floor
> pans will be welded in and body mounts / channels replaced. Shackle
> reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
> upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
> calipers, bearing, pads, etc). Power steering, power brakes. Factory
> half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
> with chevy blower. Locking console with Pioneer cd player and
> speakers, also have cb. Dash has factory clock and tach, leather
> wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
> wheel. Bucket seats with new covers, has rear bench mounted facing
> backward. Custom tonneau cover with supports. Rear axle has Superior
> 1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
> Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
> wheels.
> The planned powertrain swap is included as are the Novak swap parts.
> Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
> Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
> before. Everything fits ok, removed engine and trans to complete
> wiring and other under hood details.
>
> Some things needed to finish project:
> Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
>
> I hate to part with this, I've owned it for 6 years. It's been a great
> toy but my priorities have unexpectedly changed.
>
> Thanks for the help,
> Don W
>
#4
Guest
Posts: n/a
Re: Selling the Scrambler project
Where are you located? That makes a difference.
Carl
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1163727827.421082.221350@m7g2000cwm.googlegro ups.com...
> Hey Everyone,
> It looks like i'm going to sell my '82 Scrambler project. It's a
> last resort and i'm looking for suggestions on asking price.
> It's body and frame are complete, some rust bubbling under doors.
> Frame is solid, full steel doors. Black. Before i sell it new floor
> pans will be welded in and body mounts / channels replaced. Shackle
> reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
> upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
> calipers, bearing, pads, etc). Power steering, power brakes. Factory
> half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
> with chevy blower. Locking console with Pioneer cd player and
> speakers, also have cb. Dash has factory clock and tach, leather
> wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
> wheel. Bucket seats with new covers, has rear bench mounted facing
> backward. Custom tonneau cover with supports. Rear axle has Superior
> 1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
> Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
> wheels.
> The planned powertrain swap is included as are the Novak swap parts.
> Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
> Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
> before. Everything fits ok, removed engine and trans to complete
> wiring and other under hood details.
>
> Some things needed to finish project:
> Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
>
> I hate to part with this, I've owned it for 6 years. It's been a great
> toy but my priorities have unexpectedly changed.
>
> Thanks for the help,
> Don W
>
Carl
"QuickTruck" <QuickTruck@Aol.Com> wrote in message
news:1163727827.421082.221350@m7g2000cwm.googlegro ups.com...
> Hey Everyone,
> It looks like i'm going to sell my '82 Scrambler project. It's a
> last resort and i'm looking for suggestions on asking price.
> It's body and frame are complete, some rust bubbling under doors.
> Frame is solid, full steel doors. Black. Before i sell it new floor
> pans will be welded in and body mounts / channels replaced. Shackle
> reverse / lift and new 2.5" Black Diamond lift. Front Dana 30 axle
> upgraded to 6-bolt premium Warn Hubs, all new brake parts (rotors,
> calipers, bearing, pads, etc). Power steering, power brakes. Factory
> half-cab hardtop and bikini top, chrome grill. Heater motor upgraded
> with chevy blower. Locking console with Pioneer cd player and
> speakers, also have cb. Dash has factory clock and tach, leather
> wrapped grab bar. Auto Meter gauges, tilt steering column with Jeep
> wheel. Bucket seats with new covers, has rear bench mounted facing
> backward. Custom tonneau cover with supports. Rear axle has Superior
> 1-piece kit, all new brake parts and seals. Class 3 hitch. 33" Mickey
> Thompson Baja Radials (1/2 tread) on American Racing Atlas 15 X 8
> wheels.
> The planned powertrain swap is included as are the Novak swap parts.
> Ford truck roller cam 5.0 with 4 bbl Edelbrock intake, just rebuilt.
> Ford T-18 with granny low, just rebuilt. Dana 300, used in this Jeep
> before. Everything fits ok, removed engine and trans to complete
> wiring and other under hood details.
>
> Some things needed to finish project:
> Carb, electric fuel pump, alternator, exhaust manifolds, driveshafts.
>
> I hate to part with this, I've owned it for 6 years. It's been a great
> toy but my priorities have unexpectedly changed.
>
> Thanks for the help,
> Don W
>
Thread
Thread Starter
Forum
Replies
Last Post
1sickYJ
General Jeep and Tech Talk.
0
03-14-2007 11:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)