Rust repair, primers, bedliner and POR-15.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
<snip>
>Just out of morbid curiosity, how many hours did you spend (almost)
>getting this done? How much money? I'm curious because I just got a
>part-time job at a blasting place and they do whole cars there in a few
>hours for around $500, completely stripped using plastic media inside &
>out to bare metal. Same thing with fiberglass bodies and it doesn't
>damage it at all.
<snip>
>Good luck,
> - Jeff G
Man! Don't even talk about the advantages of having a pro do the job vs. at
least my amateur attempts. <lol> When I put my lift on
http://www.monogramsinc.com/jeep/jee...spring-big.jpg
I did it myself, by myself, with some hand and air tools, a floor jack and some
really cheep floor stands. It took me close to 40 hours to do the job. Some
time later I was at one of the better 4 wheel drive shops in town and I asked
what the labor charge would have been for the job, $350 and they get the kits
installed in a day. By the time it was all said and done I "earned" about six
bucks an hour for my time and effort.
Dean
But I did get bragging rights.
>Just out of morbid curiosity, how many hours did you spend (almost)
>getting this done? How much money? I'm curious because I just got a
>part-time job at a blasting place and they do whole cars there in a few
>hours for around $500, completely stripped using plastic media inside &
>out to bare metal. Same thing with fiberglass bodies and it doesn't
>damage it at all.
<snip>
>Good luck,
> - Jeff G
Man! Don't even talk about the advantages of having a pro do the job vs. at
least my amateur attempts. <lol> When I put my lift on
http://www.monogramsinc.com/jeep/jee...spring-big.jpg
I did it myself, by myself, with some hand and air tools, a floor jack and some
really cheep floor stands. It took me close to 40 hours to do the job. Some
time later I was at one of the better 4 wheel drive shops in town and I asked
what the labor charge would have been for the job, $350 and they get the kits
installed in a day. By the time it was all said and done I "earned" about six
bucks an hour for my time and effort.
Dean
But I did get bragging rights.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
<snip>
>Just out of morbid curiosity, how many hours did you spend (almost)
>getting this done? How much money? I'm curious because I just got a
>part-time job at a blasting place and they do whole cars there in a few
>hours for around $500, completely stripped using plastic media inside &
>out to bare metal. Same thing with fiberglass bodies and it doesn't
>damage it at all.
<snip>
>Good luck,
> - Jeff G
Man! Don't even talk about the advantages of having a pro do the job vs. at
least my amateur attempts. <lol> When I put my lift on
http://www.monogramsinc.com/jeep/jee...spring-big.jpg
I did it myself, by myself, with some hand and air tools, a floor jack and some
really cheep floor stands. It took me close to 40 hours to do the job. Some
time later I was at one of the better 4 wheel drive shops in town and I asked
what the labor charge would have been for the job, $350 and they get the kits
installed in a day. By the time it was all said and done I "earned" about six
bucks an hour for my time and effort.
Dean
But I did get bragging rights.
>Just out of morbid curiosity, how many hours did you spend (almost)
>getting this done? How much money? I'm curious because I just got a
>part-time job at a blasting place and they do whole cars there in a few
>hours for around $500, completely stripped using plastic media inside &
>out to bare metal. Same thing with fiberglass bodies and it doesn't
>damage it at all.
<snip>
>Good luck,
> - Jeff G
Man! Don't even talk about the advantages of having a pro do the job vs. at
least my amateur attempts. <lol> When I put my lift on
http://www.monogramsinc.com/jeep/jee...spring-big.jpg
I did it myself, by myself, with some hand and air tools, a floor jack and some
really cheep floor stands. It took me close to 40 hours to do the job. Some
time later I was at one of the better 4 wheel drive shops in town and I asked
what the labor charge would have been for the job, $350 and they get the kits
installed in a day. By the time it was all said and done I "earned" about six
bucks an hour for my time and effort.
Dean
But I did get bragging rights.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
<snip>
>Just out of morbid curiosity, how many hours did you spend (almost)
>getting this done? How much money? I'm curious because I just got a
>part-time job at a blasting place and they do whole cars there in a few
>hours for around $500, completely stripped using plastic media inside &
>out to bare metal. Same thing with fiberglass bodies and it doesn't
>damage it at all.
<snip>
>Good luck,
> - Jeff G
Man! Don't even talk about the advantages of having a pro do the job vs. at
least my amateur attempts. <lol> When I put my lift on
http://www.monogramsinc.com/jeep/jee...spring-big.jpg
I did it myself, by myself, with some hand and air tools, a floor jack and some
really cheep floor stands. It took me close to 40 hours to do the job. Some
time later I was at one of the better 4 wheel drive shops in town and I asked
what the labor charge would have been for the job, $350 and they get the kits
installed in a day. By the time it was all said and done I "earned" about six
bucks an hour for my time and effort.
Dean
But I did get bragging rights.
>Just out of morbid curiosity, how many hours did you spend (almost)
>getting this done? How much money? I'm curious because I just got a
>part-time job at a blasting place and they do whole cars there in a few
>hours for around $500, completely stripped using plastic media inside &
>out to bare metal. Same thing with fiberglass bodies and it doesn't
>damage it at all.
<snip>
>Good luck,
> - Jeff G
Man! Don't even talk about the advantages of having a pro do the job vs. at
least my amateur attempts. <lol> When I put my lift on
http://www.monogramsinc.com/jeep/jee...spring-big.jpg
I did it myself, by myself, with some hand and air tools, a floor jack and some
really cheep floor stands. It took me close to 40 hours to do the job. Some
time later I was at one of the better 4 wheel drive shops in town and I asked
what the labor charge would have been for the job, $350 and they get the kits
installed in a day. By the time it was all said and done I "earned" about six
bucks an hour for my time and effort.
Dean
But I did get bragging rights.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
damn, you just sold me. I want to do that to my Rubi.. now I will have it
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
damn, you just sold me. I want to do that to my Rubi.. now I will have it
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
damn, you just sold me. I want to do that to my Rubi.. now I will have it
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
Guest
Posts: n/a
Re: Rust repair, primers, bedliner and POR-15.
damn, you just sold me. I want to do that to my Rubi.. now I will have it
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
done.
thx
=== you must first take out MYUGLYSISTER to email me privately ===
"Dean" <Jeep_TJ.removethis@hotmail.dot.com > wrote in message
news:jfjgh0lv0b84qvvghtf1dmpo9v1mfumldo@4ax.com...
> <snip>
>
> >Just out of morbid curiosity, how many hours did you spend (almost)
> >getting this done? How much money? I'm curious because I just got a
> >part-time job at a blasting place and they do whole cars there in a few
> >hours for around $500, completely stripped using plastic media inside &
> >out to bare metal. Same thing with fiberglass bodies and it doesn't
> >damage it at all.
>
> <snip>
>
> >Good luck,
> > - Jeff G
>
> Man! Don't even talk about the advantages of having a pro do the job vs.
at
> least my amateur attempts. <lol> When I put my lift on
>
> http://www.monogramsinc.com/jeep/jee...spring-big.jpg
>
> I did it myself, by myself, with some hand and air tools, a floor jack
and some
> really cheep floor stands. It took me close to 40 hours to do the job.
Some
> time later I was at one of the better 4 wheel drive shops in town and I
asked
> what the labor charge would have been for the job, $350 and they get the
kits
> installed in a day. By the time it was all said and done I "earned" about
six
> bucks an hour for my time and effort.
>
> Dean
> But I did get bragging rights.
Thread
Thread Starter
Forum
Replies
Last Post
springs@mail.gr
Jeep Mailing List
0
May 2, 2007 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
