rough idle 97 TJ
 

Ok so this morning i was tracking down an overheating problem with my
jeep in idle. Turns out the problem was a clogged radiator. Anyways so
I ran the jeep about 30 minutes in idle to assure myself that it
wasn't overheating any more. At that point it was running fine. About
1/2 hour later, I started my Jeep again and it ran really really
rough. It didnt stall, but the RPMs were going up and down in idle. It
was acting really weird. I went to the parts store and bout Seafoam,
and filled up my gas tank, but the problem still persisits.

Re: rough idle 97 TJ
 

i just got a check engine light and code:

24* Throttle position sensor over 4.96V

I tried cleaning the contacts on it to no avail. Now should I clean
out the throttle body or replace the sensor?

Re: rough idle 97 TJ
 

i just got a check engine light and code:

24* Throttle position sensor over 4.96V

I tried cleaning the contacts on it to no avail. Now should I clean
out the throttle body or replace the sensor?

Re: rough idle 97 TJ
 

i just got a check engine light and code:

24* Throttle position sensor over 4.96V

I tried cleaning the contacts on it to no avail. Now should I clean
out the throttle body or replace the sensor?

Re: rough idle 97 TJ
 

i just got a check engine light and code:

24* Throttle position sensor over 4.96V

I tried cleaning the contacts on it to no avail. Now should I clean
out the throttle body or replace the sensor?

Re: rough idle 97 TJ
 

97tjMike wrote:
> i just got a check engine light and code:
>
> 24* Throttle position sensor over 4.96V
>
> I tried cleaning the contacts on it to no avail. Now should I clean
> out the throttle body or replace the sensor?
>

Probably need a TPS. Mine went bad and it wouldn't idle.

Re: rough idle 97 TJ
 

97tjMike wrote:
> i just got a check engine light and code:
>
> 24* Throttle position sensor over 4.96V
>
> I tried cleaning the contacts on it to no avail. Now should I clean
> out the throttle body or replace the sensor?
>

Probably need a TPS. Mine went bad and it wouldn't idle.

Re: rough idle 97 TJ
 

97tjMike wrote:
> i just got a check engine light and code:
>
> 24* Throttle position sensor over 4.96V
>
> I tried cleaning the contacts on it to no avail. Now should I clean
> out the throttle body or replace the sensor?
>

Probably need a TPS. Mine went bad and it wouldn't idle.

Re: rough idle 97 TJ
 

97tjMike wrote:
> i just got a check engine light and code:
>
> 24* Throttle position sensor over 4.96V
>
> I tried cleaning the contacts on it to no avail. Now should I clean
> out the throttle body or replace the sensor?
>

Probably need a TPS. Mine went bad and it wouldn't idle.

Re: rough idle 97 TJ
 

On Jun 2, 2:22 pm, Scott in Baltimore
<sDcOoNtTtS_PuAnMiMtE...@yahoo.com> wrote:
> 97tjMike wrote:
> > i just got a check engine light and code:
>
> > 24* Throttle position sensor over 4.96V
>
> > I tried cleaning the contacts on it to no avail. Now should I clean
> > out the throttle body or replace the sensor?
>
> Probably need a TPS. Mine went bad and it wouldn't idle.

is there a way to test the old one?