Ring and pinion - tech answer needed
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Bill,
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
The company's not worth sh*t if it's not sold on Summit:
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
The company's not worth sh*t if it's not sold on Summit:
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
The company's not worth sh*t if it's not sold on Summit:
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
The company's not worth sh*t if it's not sold on Summit:
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
http://store.summitracing.com/defaul...inion&x=19&y=9
Eye balling the Dana 30 housings I could find, the pinions look the
same length to me: http://www.----------.com/YjTjCjDana30.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Steve wrote:
>
> Bill,
>
> The domain name registrant is likely an employee of Randy's Ring &
> Pinion, an Everett WA company that moves $30 million annually and was
> listed by Inc. Magazine as one of the top 500 fastest-growing companies
> in 2003:
>
> http://www.off-road.com/rock/2003uroc/profile/randy/
> http://seattletimes.nwsource.com/htm...growth14n.html
> http://www.jjournal.net/jeep/feature...RingandPinion/
>
> Back to the original point, the TJ Dana 30 pinion is significantly
> shorter than a normal Dana 30 pinion and it is therefore not compatible
> with a CJ Dana 30.
>
> Here's yet another R&P vendor that lists different parts for TJ-only and
> non-TJ standard cut Dana 30 gears:
>
> http://www.drivetrainsuperstores.com...e2.asp?axle=15
> http://www.drivetrainsuperstores.com...e2.asp?axle=14
>
> Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
> mostly by OEM Danas with aftermarkets filling out the selection for
> 4.11-4.88.
>
> If you care to settle the wager, you can send payment to
> xjlifter@canada.com through http://paypal.com .
>
> Steve
> http://xjeep.dyndns.org
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Okay, read page 20 of the Superior catalog:
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Okay, read page 20 of the Superior catalog:
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Okay, read page 20 of the Superior catalog:
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Okay, read page 20 of the Superior catalog:
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
http://www.superioraxle.com/pdffolde...atalog2004.pdf
States that "Gears ending in 'TJ' Fit: 1997 & UP Jeep TJ Wrangler
Front". The clear implication is that all others do not and, conversely,
that such TJ-only gears will not fit a 'normal' Dana 30. What more do
you need?
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> The company's not worth sh*t if it's not sold on Summit:
> http://store.summitracing.com/defaul...inion&x=19&y=9
> Eye balling the Dana 30 housings I could find, the pinions look the
> same length to me: http://www.----------.com/YjTjCjDana30.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
