Ring and pinion - tech answer needed
#31
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
http://www.ringpinion.com/tech/techg1297.html
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Yes, I remember your Japanese sized 44 that Daimler uses. You don't
> mind if I chose to load a Dana 30 with Real gears, if they are available
> like in the 3.73 ratio, do you? And because it will fit with the use of
> shims, you own me a hundred bucks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
http://www.ringpinion.com/tech/techg1297.html
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Yes, I remember your Japanese sized 44 that Daimler uses. You don't
> mind if I chose to load a Dana 30 with Real gears, if they are available
> like in the 3.73 ratio, do you? And because it will fit with the use of
> shims, you own me a hundred bucks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
#32
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
http://www.ringpinion.com/tech/techg1297.html
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Yes, I remember your Japanese sized 44 that Daimler uses. You don't
> mind if I chose to load a Dana 30 with Real gears, if they are available
> like in the 3.73 ratio, do you? And because it will fit with the use of
> shims, you own me a hundred bucks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
http://www.ringpinion.com/tech/techg1297.html
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Yes, I remember your Japanese sized 44 that Daimler uses. You don't
> mind if I chose to load a Dana 30 with Real gears, if they are available
> like in the 3.73 ratio, do you? And because it will fit with the use of
> shims, you own me a hundred bucks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
#33
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
http://www.ringpinion.com/tech/techg1297.html
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Yes, I remember your Japanese sized 44 that Daimler uses. You don't
> mind if I chose to load a Dana 30 with Real gears, if they are available
> like in the 3.73 ratio, do you? And because it will fit with the use of
> shims, you own me a hundred bucks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
http://www.ringpinion.com/tech/techg1297.html
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> Yes, I remember your Japanese sized 44 that Daimler uses. You don't
> mind if I chose to load a Dana 30 with Real gears, if they are available
> like in the 3.73 ratio, do you? And because it will fit with the use of
> shims, you own me a hundred bucks.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
#34
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
"AMC Model 35"?
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
#35
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
"AMC Model 35"?
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
#36
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
"AMC Model 35"?
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
#37
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
"AMC Model 35"?
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
S.E. Everett, WA 98204?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>
> http://www.ringpinion.com/tech/techg1297.html
>
> Steve
> http://xjeep.dyndns.org
#38
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Bill,
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
#39
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Bill,
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
#40
Guest
Posts: n/a
Re: Ring and pinion - tech answer needed
Bill,
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org
The domain name registrant is likely an employee of Randy's Ring &
Pinion, an Everett WA company that moves $30 million annually and was
listed by Inc. Magazine as one of the top 500 fastest-growing companies
in 2003:
http://www.off-road.com/rock/2003uroc/profile/randy/
http://seattletimes.nwsource.com/htm...growth14n.html
http://www.jjournal.net/jeep/feature...RingandPinion/
Back to the original point, the TJ Dana 30 pinion is significantly
shorter than a normal Dana 30 pinion and it is therefore not compatible
with a CJ Dana 30.
Here's yet another R&P vendor that lists different parts for TJ-only and
non-TJ standard cut Dana 30 gears:
http://www.drivetrainsuperstores.com...e2.asp?axle=15
http://www.drivetrainsuperstores.com...e2.asp?axle=14
Note that all ratios (yes, even 3.73) are covered by the TJ-only gears,
mostly by OEM Danas with aftermarkets filling out the selection for
4.11-4.88.
If you care to settle the wager, you can send payment to
xjlifter@canada.com through http://paypal.com .
Steve
http://xjeep.dyndns.org
L.W.(ßill) ------ III wrote:
> "AMC Model 35"?
> Who is Tim Dreyer, Ring & Pinion Service, Inc. 10411 Airport Road
> S.E. Everett, WA 98204?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve wrote:
>
>>That stubby TJ pinion just won't work in a 'Real' CJ Dana 30:
>>
>> http://www.ringpinion.com/tech/techg1297.html
>>
>>Steve
>>http://xjeep.dyndns.org