Reprogram keyless fob in 2000XJ?
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
I surely miss the R12 tuner spray cleaner sold by Radio Shack.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Lon" <lon.stowell@comcast.net> wrote in message
> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
> in it in addition to the isopropyl. Best cleaning is with a chamois
> stick and isoproply or one of the other head cleaners. Should be
> available in fairly small bottles at nearest rat shack or other
> electronics store. MIGHT be able to get it clean enough without
> disassembly by using a spray tuner cleaner followed by a blast of
> duster. The switches themselves tend to be very small and rather easy
> to lose some tiny part, so spray clean is recommended unless the OP is
> very good with small mechanical parts and can de-solder and resolder
> then remove all flux properly [left over flux tends to be a big source
> of later failures]. The switches also have a bad habit of cracking
> loose from their mounts, again resoldering fixes. Really not enough
> voltage or current to keep a mechanical switch's contacts clean or burn
> thru minor corrosion--the hall effect or simple magnet sensor types are
> much better, although they also get cruddy and benefit from careful
> cleaning with isopropyl or other electronic cleaner followed by careful
> blow dry to remove all residue.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Lon" <lon.stowell@comcast.net> wrote in message
> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
> in it in addition to the isopropyl. Best cleaning is with a chamois
> stick and isoproply or one of the other head cleaners. Should be
> available in fairly small bottles at nearest rat shack or other
> electronics store. MIGHT be able to get it clean enough without
> disassembly by using a spray tuner cleaner followed by a blast of
> duster. The switches themselves tend to be very small and rather easy
> to lose some tiny part, so spray clean is recommended unless the OP is
> very good with small mechanical parts and can de-solder and resolder
> then remove all flux properly [left over flux tends to be a big source
> of later failures]. The switches also have a bad habit of cracking
> loose from their mounts, again resoldering fixes. Really not enough
> voltage or current to keep a mechanical switch's contacts clean or burn
> thru minor corrosion--the hall effect or simple magnet sensor types are
> much better, although they also get cruddy and benefit from careful
> cleaning with isopropyl or other electronic cleaner followed by careful
> blow dry to remove all residue.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
I surely miss the R12 tuner spray cleaner sold by Radio Shack.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Lon" <lon.stowell@comcast.net> wrote in message
> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
> in it in addition to the isopropyl. Best cleaning is with a chamois
> stick and isoproply or one of the other head cleaners. Should be
> available in fairly small bottles at nearest rat shack or other
> electronics store. MIGHT be able to get it clean enough without
> disassembly by using a spray tuner cleaner followed by a blast of
> duster. The switches themselves tend to be very small and rather easy
> to lose some tiny part, so spray clean is recommended unless the OP is
> very good with small mechanical parts and can de-solder and resolder
> then remove all flux properly [left over flux tends to be a big source
> of later failures]. The switches also have a bad habit of cracking
> loose from their mounts, again resoldering fixes. Really not enough
> voltage or current to keep a mechanical switch's contacts clean or burn
> thru minor corrosion--the hall effect or simple magnet sensor types are
> much better, although they also get cruddy and benefit from careful
> cleaning with isopropyl or other electronic cleaner followed by careful
> blow dry to remove all residue.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Lon" <lon.stowell@comcast.net> wrote in message
> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
> in it in addition to the isopropyl. Best cleaning is with a chamois
> stick and isoproply or one of the other head cleaners. Should be
> available in fairly small bottles at nearest rat shack or other
> electronics store. MIGHT be able to get it clean enough without
> disassembly by using a spray tuner cleaner followed by a blast of
> duster. The switches themselves tend to be very small and rather easy
> to lose some tiny part, so spray clean is recommended unless the OP is
> very good with small mechanical parts and can de-solder and resolder
> then remove all flux properly [left over flux tends to be a big source
> of later failures]. The switches also have a bad habit of cracking
> loose from their mounts, again resoldering fixes. Really not enough
> voltage or current to keep a mechanical switch's contacts clean or burn
> thru minor corrosion--the hall effect or simple magnet sensor types are
> much better, although they also get cruddy and benefit from careful
> cleaning with isopropyl or other electronic cleaner followed by careful
> blow dry to remove all residue.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
I surely miss the R12 tuner spray cleaner sold by Radio Shack.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Lon" <lon.stowell@comcast.net> wrote in message
> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
> in it in addition to the isopropyl. Best cleaning is with a chamois
> stick and isoproply or one of the other head cleaners. Should be
> available in fairly small bottles at nearest rat shack or other
> electronics store. MIGHT be able to get it clean enough without
> disassembly by using a spray tuner cleaner followed by a blast of
> duster. The switches themselves tend to be very small and rather easy
> to lose some tiny part, so spray clean is recommended unless the OP is
> very good with small mechanical parts and can de-solder and resolder
> then remove all flux properly [left over flux tends to be a big source
> of later failures]. The switches also have a bad habit of cracking
> loose from their mounts, again resoldering fixes. Really not enough
> voltage or current to keep a mechanical switch's contacts clean or burn
> thru minor corrosion--the hall effect or simple magnet sensor types are
> much better, although they also get cruddy and benefit from careful
> cleaning with isopropyl or other electronic cleaner followed by careful
> blow dry to remove all residue.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Lon" <lon.stowell@comcast.net> wrote in message
> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
> in it in addition to the isopropyl. Best cleaning is with a chamois
> stick and isoproply or one of the other head cleaners. Should be
> available in fairly small bottles at nearest rat shack or other
> electronics store. MIGHT be able to get it clean enough without
> disassembly by using a spray tuner cleaner followed by a blast of
> duster. The switches themselves tend to be very small and rather easy
> to lose some tiny part, so spray clean is recommended unless the OP is
> very good with small mechanical parts and can de-solder and resolder
> then remove all flux properly [left over flux tends to be a big source
> of later failures]. The switches also have a bad habit of cracking
> loose from their mounts, again resoldering fixes. Really not enough
> voltage or current to keep a mechanical switch's contacts clean or burn
> thru minor corrosion--the hall effect or simple magnet sensor types are
> much better, although they also get cruddy and benefit from careful
> cleaning with isopropyl or other electronic cleaner followed by careful
> blow dry to remove all residue.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
http://www.deoxit.com/
Used by recording, TV and broadcast studio technicians the world over. Saved
my a$$ numerous times during critical sessions.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45eb7696$0$16364$88260bb3@free.teranews.com.. .
> I surely miss the R12 tuner spray cleaner sold by Radio Shack.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Lon" <lon.stowell@comcast.net> wrote in message
>> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
>> in it in addition to the isopropyl. Best cleaning is with a chamois
>> stick and isoproply or one of the other head cleaners. Should be
>> available in fairly small bottles at nearest rat shack or other
>> electronics store. MIGHT be able to get it clean enough without
>> disassembly by using a spray tuner cleaner followed by a blast of
>> duster. The switches themselves tend to be very small and rather easy
>> to lose some tiny part, so spray clean is recommended unless the OP is
>> very good with small mechanical parts and can de-solder and resolder
>> then remove all flux properly [left over flux tends to be a big source
>> of later failures]. The switches also have a bad habit of cracking
>> loose from their mounts, again resoldering fixes. Really not enough
>> voltage or current to keep a mechanical switch's contacts clean or burn
>> thru minor corrosion--the hall effect or simple magnet sensor types are
>> much better, although they also get cruddy and benefit from careful
>> cleaning with isopropyl or other electronic cleaner followed by careful
>> blow dry to remove all residue.
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Used by recording, TV and broadcast studio technicians the world over. Saved
my a$$ numerous times during critical sessions.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45eb7696$0$16364$88260bb3@free.teranews.com.. .
> I surely miss the R12 tuner spray cleaner sold by Radio Shack.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Lon" <lon.stowell@comcast.net> wrote in message
>> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
>> in it in addition to the isopropyl. Best cleaning is with a chamois
>> stick and isoproply or one of the other head cleaners. Should be
>> available in fairly small bottles at nearest rat shack or other
>> electronics store. MIGHT be able to get it clean enough without
>> disassembly by using a spray tuner cleaner followed by a blast of
>> duster. The switches themselves tend to be very small and rather easy
>> to lose some tiny part, so spray clean is recommended unless the OP is
>> very good with small mechanical parts and can de-solder and resolder
>> then remove all flux properly [left over flux tends to be a big source
>> of later failures]. The switches also have a bad habit of cracking
>> loose from their mounts, again resoldering fixes. Really not enough
>> voltage or current to keep a mechanical switch's contacts clean or burn
>> thru minor corrosion--the hall effect or simple magnet sensor types are
>> much better, although they also get cruddy and benefit from careful
>> cleaning with isopropyl or other electronic cleaner followed by careful
>> blow dry to remove all residue.
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
http://www.deoxit.com/
Used by recording, TV and broadcast studio technicians the world over. Saved
my a$$ numerous times during critical sessions.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45eb7696$0$16364$88260bb3@free.teranews.com.. .
> I surely miss the R12 tuner spray cleaner sold by Radio Shack.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Lon" <lon.stowell@comcast.net> wrote in message
>> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
>> in it in addition to the isopropyl. Best cleaning is with a chamois
>> stick and isoproply or one of the other head cleaners. Should be
>> available in fairly small bottles at nearest rat shack or other
>> electronics store. MIGHT be able to get it clean enough without
>> disassembly by using a spray tuner cleaner followed by a blast of
>> duster. The switches themselves tend to be very small and rather easy
>> to lose some tiny part, so spray clean is recommended unless the OP is
>> very good with small mechanical parts and can de-solder and resolder
>> then remove all flux properly [left over flux tends to be a big source
>> of later failures]. The switches also have a bad habit of cracking
>> loose from their mounts, again resoldering fixes. Really not enough
>> voltage or current to keep a mechanical switch's contacts clean or burn
>> thru minor corrosion--the hall effect or simple magnet sensor types are
>> much better, although they also get cruddy and benefit from careful
>> cleaning with isopropyl or other electronic cleaner followed by careful
>> blow dry to remove all residue.
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Used by recording, TV and broadcast studio technicians the world over. Saved
my a$$ numerous times during critical sessions.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45eb7696$0$16364$88260bb3@free.teranews.com.. .
> I surely miss the R12 tuner spray cleaner sold by Radio Shack.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Lon" <lon.stowell@comcast.net> wrote in message
>> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
>> in it in addition to the isopropyl. Best cleaning is with a chamois
>> stick and isoproply or one of the other head cleaners. Should be
>> available in fairly small bottles at nearest rat shack or other
>> electronics store. MIGHT be able to get it clean enough without
>> disassembly by using a spray tuner cleaner followed by a blast of
>> duster. The switches themselves tend to be very small and rather easy
>> to lose some tiny part, so spray clean is recommended unless the OP is
>> very good with small mechanical parts and can de-solder and resolder
>> then remove all flux properly [left over flux tends to be a big source
>> of later failures]. The switches also have a bad habit of cracking
>> loose from their mounts, again resoldering fixes. Really not enough
>> voltage or current to keep a mechanical switch's contacts clean or burn
>> thru minor corrosion--the hall effect or simple magnet sensor types are
>> much better, although they also get cruddy and benefit from careful
>> cleaning with isopropyl or other electronic cleaner followed by careful
>> blow dry to remove all residue.
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
http://www.deoxit.com/
Used by recording, TV and broadcast studio technicians the world over. Saved
my a$$ numerous times during critical sessions.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45eb7696$0$16364$88260bb3@free.teranews.com.. .
> I surely miss the R12 tuner spray cleaner sold by Radio Shack.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Lon" <lon.stowell@comcast.net> wrote in message
>> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
>> in it in addition to the isopropyl. Best cleaning is with a chamois
>> stick and isoproply or one of the other head cleaners. Should be
>> available in fairly small bottles at nearest rat shack or other
>> electronics store. MIGHT be able to get it clean enough without
>> disassembly by using a spray tuner cleaner followed by a blast of
>> duster. The switches themselves tend to be very small and rather easy
>> to lose some tiny part, so spray clean is recommended unless the OP is
>> very good with small mechanical parts and can de-solder and resolder
>> then remove all flux properly [left over flux tends to be a big source
>> of later failures]. The switches also have a bad habit of cracking
>> loose from their mounts, again resoldering fixes. Really not enough
>> voltage or current to keep a mechanical switch's contacts clean or burn
>> thru minor corrosion--the hall effect or simple magnet sensor types are
>> much better, although they also get cruddy and benefit from careful
>> cleaning with isopropyl or other electronic cleaner followed by careful
>> blow dry to remove all residue.
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Used by recording, TV and broadcast studio technicians the world over. Saved
my a$$ numerous times during critical sessions.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45eb7696$0$16364$88260bb3@free.teranews.com.. .
> I surely miss the R12 tuner spray cleaner sold by Radio Shack.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Lon" <lon.stowell@comcast.net> wrote in message
>> Rubbing alcohol is a terrible electronics cleaner, too much other stuff
>> in it in addition to the isopropyl. Best cleaning is with a chamois
>> stick and isoproply or one of the other head cleaners. Should be
>> available in fairly small bottles at nearest rat shack or other
>> electronics store. MIGHT be able to get it clean enough without
>> disassembly by using a spray tuner cleaner followed by a blast of
>> duster. The switches themselves tend to be very small and rather easy
>> to lose some tiny part, so spray clean is recommended unless the OP is
>> very good with small mechanical parts and can de-solder and resolder
>> then remove all flux properly [left over flux tends to be a big source
>> of later failures]. The switches also have a bad habit of cracking
>> loose from their mounts, again resoldering fixes. Really not enough
>> voltage or current to keep a mechanical switch's contacts clean or burn
>> thru minor corrosion--the hall effect or simple magnet sensor types are
>> much better, although they also get cruddy and benefit from careful
>> cleaning with isopropyl or other electronic cleaner followed by careful
>> blow dry to remove all residue.
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
Thanks you.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:x6adnaD8Ao_bG3bYnZ2dnUVZ_oipnZ2d@comcast.com. ..
> http://www.deoxit.com/
>
> Used by recording, TV and broadcast studio technicians the world over.
Saved
> my a$$ numerous times during critical sessions.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:x6adnaD8Ao_bG3bYnZ2dnUVZ_oipnZ2d@comcast.com. ..
> http://www.deoxit.com/
>
> Used by recording, TV and broadcast studio technicians the world over.
Saved
> my a$$ numerous times during critical sessions.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
Thanks you.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:x6adnaD8Ao_bG3bYnZ2dnUVZ_oipnZ2d@comcast.com. ..
> http://www.deoxit.com/
>
> Used by recording, TV and broadcast studio technicians the world over.
Saved
> my a$$ numerous times during critical sessions.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:x6adnaD8Ao_bG3bYnZ2dnUVZ_oipnZ2d@comcast.com. ..
> http://www.deoxit.com/
>
> Used by recording, TV and broadcast studio technicians the world over.
Saved
> my a$$ numerous times during critical sessions.
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: Reprogram keyless fob in 2000XJ?
Thanks you.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:x6adnaD8Ao_bG3bYnZ2dnUVZ_oipnZ2d@comcast.com. ..
> http://www.deoxit.com/
>
> Used by recording, TV and broadcast studio technicians the world over.
Saved
> my a$$ numerous times during critical sessions.
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:x6adnaD8Ao_bG3bYnZ2dnUVZ_oipnZ2d@comcast.com. ..
> http://www.deoxit.com/
>
> Used by recording, TV and broadcast studio technicians the world over.
Saved
> my a$$ numerous times during critical sessions.
--
Posted via a free Usenet account from http://www.teranews.com
Thread
Thread Starter
Forum
Replies
Last Post
Jjsegr
Jeep Mailing List
3
Nov 18, 2003 12:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
