Replacing Serpentine Belt and X-Fer Case Fluid (2000 TJ)
Guest
Posts: n/a
Re: Replacing Serpentine Belt and X-Fer Case Fluid (2000 TJ)
1998 FSM page 7-30
New serpentine belt = 180 to 200 lbs
Used serpentine belt = 140 to 160lbs
Belt is considered New if used 15 minutes or less
Purchased a serpentine belt tester (Gates #91132) from parts store for
$13.16 serpentine tester is different then v-belt tester)
too tight & bearings go bad - too loose & belt slips, squeals, wears out,
etc...........more better to spend $13.16........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"David C. Moller" <dmoller@verizon.net> wrote in message
news:7rvpnvg30nmc18qksh6d42jqi3uivng32t@4ax.com...
> Serpentine belt should be just to take the tension off the pulley. Not
> sure of the wrench size for the transfer case, but I didn't need to
> remove the skid plate to drain mine.
>
> Dave
> http://home1.gte.net/res0p2es/david/index.htm
>
> On 02 Oct 2003 16:19:01 GMT, willysguy@aol.com (WillysGuy) wrote:
>
> >My Serpentine belt is starting to look aged and I'd like to change in the
> >coming weeks. How do I go about changing the serpentine belt on my 2000
TJ
> >(4.0L). Do I need to remove the PS pulley, etc like past years, or do I
just
> >need to take tension off the belt via the idler pulley?
> >
> >Also...for the 231 Transfer Case, what size wrench will I need for the
drain
> >plugs? It seems that the plugs are 10-11mm. Does anyone know the exact
size?
> >I'm assuming I'll need to jack up the tranny and they remove the skid
plate to
> >access the drain plugs.
> >
> >Thanks
> >Pete
>
New serpentine belt = 180 to 200 lbs
Used serpentine belt = 140 to 160lbs
Belt is considered New if used 15 minutes or less
Purchased a serpentine belt tester (Gates #91132) from parts store for
$13.16 serpentine tester is different then v-belt tester)
too tight & bearings go bad - too loose & belt slips, squeals, wears out,
etc...........more better to spend $13.16........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"David C. Moller" <dmoller@verizon.net> wrote in message
news:7rvpnvg30nmc18qksh6d42jqi3uivng32t@4ax.com...
> Serpentine belt should be just to take the tension off the pulley. Not
> sure of the wrench size for the transfer case, but I didn't need to
> remove the skid plate to drain mine.
>
> Dave
> http://home1.gte.net/res0p2es/david/index.htm
>
> On 02 Oct 2003 16:19:01 GMT, willysguy@aol.com (WillysGuy) wrote:
>
> >My Serpentine belt is starting to look aged and I'd like to change in the
> >coming weeks. How do I go about changing the serpentine belt on my 2000
TJ
> >(4.0L). Do I need to remove the PS pulley, etc like past years, or do I
just
> >need to take tension off the belt via the idler pulley?
> >
> >Also...for the 231 Transfer Case, what size wrench will I need for the
drain
> >plugs? It seems that the plugs are 10-11mm. Does anyone know the exact
size?
> >I'm assuming I'll need to jack up the tranny and they remove the skid
plate to
> >access the drain plugs.
> >
> >Thanks
> >Pete
>
Guest
Posts: n/a
Re: Replacing Serpentine Belt and X-Fer Case Fluid (2000 TJ)
1998 FSM page 7-30
New serpentine belt = 180 to 200 lbs
Used serpentine belt = 140 to 160lbs
Belt is considered New if used 15 minutes or less
Purchased a serpentine belt tester (Gates #91132) from parts store for
$13.16 serpentine tester is different then v-belt tester)
too tight & bearings go bad - too loose & belt slips, squeals, wears out,
etc...........more better to spend $13.16........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"David C. Moller" <dmoller@verizon.net> wrote in message
news:7rvpnvg30nmc18qksh6d42jqi3uivng32t@4ax.com...
> Serpentine belt should be just to take the tension off the pulley. Not
> sure of the wrench size for the transfer case, but I didn't need to
> remove the skid plate to drain mine.
>
> Dave
> http://home1.gte.net/res0p2es/david/index.htm
>
> On 02 Oct 2003 16:19:01 GMT, willysguy@aol.com (WillysGuy) wrote:
>
> >My Serpentine belt is starting to look aged and I'd like to change in the
> >coming weeks. How do I go about changing the serpentine belt on my 2000
TJ
> >(4.0L). Do I need to remove the PS pulley, etc like past years, or do I
just
> >need to take tension off the belt via the idler pulley?
> >
> >Also...for the 231 Transfer Case, what size wrench will I need for the
drain
> >plugs? It seems that the plugs are 10-11mm. Does anyone know the exact
size?
> >I'm assuming I'll need to jack up the tranny and they remove the skid
plate to
> >access the drain plugs.
> >
> >Thanks
> >Pete
>
New serpentine belt = 180 to 200 lbs
Used serpentine belt = 140 to 160lbs
Belt is considered New if used 15 minutes or less
Purchased a serpentine belt tester (Gates #91132) from parts store for
$13.16 serpentine tester is different then v-belt tester)
too tight & bearings go bad - too loose & belt slips, squeals, wears out,
etc...........more better to spend $13.16........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"David C. Moller" <dmoller@verizon.net> wrote in message
news:7rvpnvg30nmc18qksh6d42jqi3uivng32t@4ax.com...
> Serpentine belt should be just to take the tension off the pulley. Not
> sure of the wrench size for the transfer case, but I didn't need to
> remove the skid plate to drain mine.
>
> Dave
> http://home1.gte.net/res0p2es/david/index.htm
>
> On 02 Oct 2003 16:19:01 GMT, willysguy@aol.com (WillysGuy) wrote:
>
> >My Serpentine belt is starting to look aged and I'd like to change in the
> >coming weeks. How do I go about changing the serpentine belt on my 2000
TJ
> >(4.0L). Do I need to remove the PS pulley, etc like past years, or do I
just
> >need to take tension off the belt via the idler pulley?
> >
> >Also...for the 231 Transfer Case, what size wrench will I need for the
drain
> >plugs? It seems that the plugs are 10-11mm. Does anyone know the exact
size?
> >I'm assuming I'll need to jack up the tranny and they remove the skid
plate to
> >access the drain plugs.
> >
> >Thanks
> >Pete
>
Guest
Posts: n/a
Re: Replacing Serpentine Belt and X-Fer Case Fluid (2000 TJ)
1998 FSM page 7-30
New serpentine belt = 180 to 200 lbs
Used serpentine belt = 140 to 160lbs
Belt is considered New if used 15 minutes or less
Purchased a serpentine belt tester (Gates #91132) from parts store for
$13.16 serpentine tester is different then v-belt tester)
too tight & bearings go bad - too loose & belt slips, squeals, wears out,
etc...........more better to spend $13.16........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"David C. Moller" <dmoller@verizon.net> wrote in message
news:7rvpnvg30nmc18qksh6d42jqi3uivng32t@4ax.com...
> Serpentine belt should be just to take the tension off the pulley. Not
> sure of the wrench size for the transfer case, but I didn't need to
> remove the skid plate to drain mine.
>
> Dave
> http://home1.gte.net/res0p2es/david/index.htm
>
> On 02 Oct 2003 16:19:01 GMT, willysguy@aol.com (WillysGuy) wrote:
>
> >My Serpentine belt is starting to look aged and I'd like to change in the
> >coming weeks. How do I go about changing the serpentine belt on my 2000
TJ
> >(4.0L). Do I need to remove the PS pulley, etc like past years, or do I
just
> >need to take tension off the belt via the idler pulley?
> >
> >Also...for the 231 Transfer Case, what size wrench will I need for the
drain
> >plugs? It seems that the plugs are 10-11mm. Does anyone know the exact
size?
> >I'm assuming I'll need to jack up the tranny and they remove the skid
plate to
> >access the drain plugs.
> >
> >Thanks
> >Pete
>
New serpentine belt = 180 to 200 lbs
Used serpentine belt = 140 to 160lbs
Belt is considered New if used 15 minutes or less
Purchased a serpentine belt tester (Gates #91132) from parts store for
$13.16 serpentine tester is different then v-belt tester)
too tight & bearings go bad - too loose & belt slips, squeals, wears out,
etc...........more better to spend $13.16........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast.net
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"David C. Moller" <dmoller@verizon.net> wrote in message
news:7rvpnvg30nmc18qksh6d42jqi3uivng32t@4ax.com...
> Serpentine belt should be just to take the tension off the pulley. Not
> sure of the wrench size for the transfer case, but I didn't need to
> remove the skid plate to drain mine.
>
> Dave
> http://home1.gte.net/res0p2es/david/index.htm
>
> On 02 Oct 2003 16:19:01 GMT, willysguy@aol.com (WillysGuy) wrote:
>
> >My Serpentine belt is starting to look aged and I'd like to change in the
> >coming weeks. How do I go about changing the serpentine belt on my 2000
TJ
> >(4.0L). Do I need to remove the PS pulley, etc like past years, or do I
just
> >need to take tension off the belt via the idler pulley?
> >
> >Also...for the 231 Transfer Case, what size wrench will I need for the
drain
> >plugs? It seems that the plugs are 10-11mm. Does anyone know the exact
size?
> >I'm assuming I'll need to jack up the tranny and they remove the skid
plate to
> >access the drain plugs.
> >
> >Thanks
> >Pete
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
