replace wheel bearing Jeep TJ 2000?
08-06-2007, 02:05 PM
#1
Guest
Posts: n/a
replace wheel bearing Jeep TJ 2000?
Hi Folks,
Now that I just completed replacement of a water pump and thermostate,
it appears my rear passanger wheel bearing might be going. I'm
experiencing a squeaking sound after a bit of driving. It doesn't
sound like the rear brakes. It's a metal against metal "screeching"
sound, therefore I suspect a bearing.
The jeep has about 145k miles on it and no bearings have been
replaced.
Has anyone completed this procedure? Any suggestions for completing
the job?
Thanks alot,
Nick
Now that I just completed replacement of a water pump and thermostate,
it appears my rear passanger wheel bearing might be going. I'm
experiencing a squeaking sound after a bit of driving. It doesn't
sound like the rear brakes. It's a metal against metal "screeching"
sound, therefore I suspect a bearing.
The jeep has about 145k miles on it and no bearings have been
replaced.
Has anyone completed this procedure? Any suggestions for completing
the job?
Thanks alot,
Nick
08-06-2007, 09:03 PM
#2
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
08-06-2007, 09:03 PM
#3
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
08-06-2007, 09:03 PM
#4
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
08-06-2007, 09:03 PM
#5
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
sure if I have my measurement wrong someone will correct me quickly.
-jenn
On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8890@gmail.com> wrote:
>>Hi Folks,
>>
>>Now that I just completed replacement of a water pump and thermostate,
>>it appears my rear passanger wheel bearing might be going. I'm
>>experiencing a squeaking sound after a bit of driving. It doesn't
>>sound like the rear brakes. It's a metal against metal "screeching"
>>sound, therefore I suspect a bearing.
>>
>>The jeep has about 145k miles on it and no bearings have been
>>replaced.
>>
>>Has anyone completed this procedure? Any suggestions for completing
>>the job?
>>
>>Thanks alot,
>>Nick
08-07-2007, 03:07 PM
#6
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
36mm is correct, at least on the front hub. Just did mine last week. I
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
08-07-2007, 03:07 PM
#7
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
36mm is correct, at least on the front hub. Just did mine last week. I
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
08-07-2007, 03:07 PM
#8
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
36mm is correct, at least on the front hub. Just did mine last week. I
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
08-07-2007, 03:07 PM
#9
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
36mm is correct, at least on the front hub. Just did mine last week. I
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
rented it for free from Advance Auto Parts.
On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
> If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> sure if I have my measurement wrong someone will correct me quickly.
> -jenn
>
> On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> >>Hi Folks,
>
> >>Now that I just completed replacement of a water pump and thermostate,
> >>it appears my rear passanger wheel bearing might be going. I'm
> >>experiencing a squeaking sound after a bit of driving. It doesn't
> >>sound like the rear brakes. It's a metal against metal "screeching"
> >>sound, therefore I suspect a bearing.
>
> >>The jeep has about 145k miles on it and no bearings have been
> >>replaced.
>
> >>Has anyone completed this procedure? Any suggestions for completing
> >>the job?
>
> >>Thanks alot,
> >>Nick
08-07-2007, 05:56 PM
#10
Guest
Posts: n/a
Re: replace wheel bearing Jeep TJ 2000?
Thanks. Did you need an impact wrench to get the nut free or just use
a breaker? I have a 1/2" impact wrench and not sure if I should get
eh 36mm socket for it.
On Aug 7, 3:07 pm, 97tjMike <MichaelJun...@gmail.com> wrote:
> 36mm is correct, at least on the front hub. Just did mine last week. I
> rented it for free from Advance Auto Parts.
>
> On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
>
> > If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> > sure if I have my measurement wrong someone will correct me quickly.
> > -jenn
>
> > On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> > >>Hi Folks,
>
> > >>Now that I just completed replacement of a water pump and thermostate,
> > >>it appears my rear passanger wheel bearing might be going. I'm
> > >>experiencing a squeaking sound after a bit of driving. It doesn't
> > >>sound like the rear brakes. It's a metal against metal "screeching"
> > >>sound, therefore I suspect a bearing.
>
> > >>The jeep has about 145k miles on it and no bearings have been
> > >>replaced.
>
> > >>Has anyone completed this procedure? Any suggestions for completing
> > >>the job?
>
> > >>Thanks alot,
> > >>Nick
a breaker? I have a 1/2" impact wrench and not sure if I should get
eh 36mm socket for it.
On Aug 7, 3:07 pm, 97tjMike <MichaelJun...@gmail.com> wrote:
> 36mm is correct, at least on the front hub. Just did mine last week. I
> rented it for free from Advance Auto Parts.
>
> On Aug 6, 9:03 pm, jbjeep <jbj...@saw.net> wrote:
>
> > If I recall correctly, you will need a 36mm socket for the "center hub nut". I am
> > sure if I have my measurement wrong someone will correct me quickly.
> > -jenn
>
> > On Mon, 06 Aug 2007 18:05:37 -0000, Nick ------ <nixon8...@gmail.com> wrote:
> > >>Hi Folks,
>
> > >>Now that I just completed replacement of a water pump and thermostate,
> > >>it appears my rear passanger wheel bearing might be going. I'm
> > >>experiencing a squeaking sound after a bit of driving. It doesn't
> > >>sound like the rear brakes. It's a metal against metal "screeching"
> > >>sound, therefore I suspect a bearing.
>
> > >>The jeep has about 145k miles on it and no bearings have been
> > >>replaced.
>
> > >>Has anyone completed this procedure? Any suggestions for completing
> > >>the job?
>
> > >>Thanks alot,
> > >>Nick
