Odd. My YJ is held in with real hex head fasteners.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4497FAD9.2E296738@sympatico.ca...
> You need a bigger wrench.... They use welded in place hidden nuts on
> most body parts. They also use a thread sealer on most that I have
> seen.
>
> I am not sure why they 'all' aren't torx though..... My seats are, but
> I have a CJ7.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> sgswest wrote:
> >
> > Three of the four bolts up top have half-inch heads that don't budge
> > when a wrench is used. The fourth on has a TORX head. Since the others
> > don't move and I cannot find the nuts I haven't tried the TORX head
> > bolt. I don't have much experience with all this. Is there a web page
> > you know of that explains and maybe SHOWS how to do this so dummies
> > like me can figure it out??? I googled all morning without success!
> > THANKS! SS
> >
> > Matt Macchiarolo wrote:
> > > Have you tried to unbolt them? They should be bolted to captured nuts
under
> > > the floorpan, two of them are not viible under the vehicle because
they bolt
> > > to a sheetmetal "riser" on top of the floorpan.
> > >
> > > "sgswest" <sgswest@aol.com> wrote in message
> > > news:1150752454.740244.256210@y41g2000cwy.googlegr oups.com...
> > > > Boy, they sure don't seem to on mine! The bolt ends I see under
there
> > > > do not line up with the ones holding the riser in place.
> > > >
> > > > Jeeper wrote:
> > > >> the 4 bolts go thru the body...get a socket and off ya go!
> > > >>
> > > >>
> > > >>
> > > >> "sgswest" <sgswest@aol.com> wrote in message
> > > >> news:1150747381.014749.61960@i40g2000cwc.googlegro ups.com...
> > > >> >I wanted to temporarily remove the front seat in my 2005 Wrangler
Sport
> > > >> > so I figured I would check this out on the web, Turns out that
if you
> > > >> > own a TJ from 2002 or older, this information is easily found.
2003
> > > >> > and higher seems to some kind of deep dark secret!!
> > > >> >
> > > >> > As I look at my seat hardware I see 6 bolts connecting the actual
seat
> > > >> > to the riser - with seemingly no way to get at them! There are
also 4
> > > >> > bolts holding the riser down. The nuts that attach to them seem
to be
> > > >> > inaccessible underneath.
> > > >> >
> > > >> > So........how do you DO this?? THANKS!!!!!
> > > >> >
> > > >

 

Odd. My YJ is held in with real hex head fasteners.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4497FAD9.2E296738@sympatico.ca...
> You need a bigger wrench.... They use welded in place hidden nuts on
> most body parts. They also use a thread sealer on most that I have
> seen.
>
> I am not sure why they 'all' aren't torx though..... My seats are, but
> I have a CJ7.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> sgswest wrote:
> >
> > Three of the four bolts up top have half-inch heads that don't budge
> > when a wrench is used. The fourth on has a TORX head. Since the others
> > don't move and I cannot find the nuts I haven't tried the TORX head
> > bolt. I don't have much experience with all this. Is there a web page
> > you know of that explains and maybe SHOWS how to do this so dummies
> > like me can figure it out??? I googled all morning without success!
> > THANKS! SS
> >
> > Matt Macchiarolo wrote:
> > > Have you tried to unbolt them? They should be bolted to captured nuts
under
> > > the floorpan, two of them are not viible under the vehicle because
they bolt
> > > to a sheetmetal "riser" on top of the floorpan.
> > >
> > > "sgswest" <sgswest@aol.com> wrote in message
> > > news:1150752454.740244.256210@y41g2000cwy.googlegr oups.com...
> > > > Boy, they sure don't seem to on mine! The bolt ends I see under
there
> > > > do not line up with the ones holding the riser in place.
> > > >
> > > > Jeeper wrote:
> > > >> the 4 bolts go thru the body...get a socket and off ya go!
> > > >>
> > > >>
> > > >>
> > > >> "sgswest" <sgswest@aol.com> wrote in message
> > > >> news:1150747381.014749.61960@i40g2000cwc.googlegro ups.com...
> > > >> >I wanted to temporarily remove the front seat in my 2005 Wrangler
Sport
> > > >> > so I figured I would check this out on the web, Turns out that
if you
> > > >> > own a TJ from 2002 or older, this information is easily found.
2003
> > > >> > and higher seems to some kind of deep dark secret!!
> > > >> >
> > > >> > As I look at my seat hardware I see 6 bolts connecting the actual
seat
> > > >> > to the riser - with seemingly no way to get at them! There are
also 4
> > > >> > bolts holding the riser down. The nuts that attach to them seem
to be
> > > >> > inaccessible underneath.
> > > >> >
> > > >> > So........how do you DO this?? THANKS!!!!!
> > > >> >
> > > >