relay for offroad lights?
#11
Guest
Posts: n/a
Re: relay for offroad lights?
Could have been bad connections at the relay. Where did the relay melt...
at the terminals? As DougW says 12.5 amps each but that is pushing the
limit of a $6 relay. And to Bill's point, if you have less than 12 volts at
the relay, the current goes up and then you approach the "30 amp rating" of
the relay. You could use a starter solenoid.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:101gjeqd3pp0v62@corp.supernews.com...
> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
> store that the guy insisted would work. so what you guys are using? also
my
> brother in-law has 4 of same lights on his off roader and is also having
> problems finding a relay that works on the 4 lights. any suggestions?
> thanks carmine
>
>
at the terminals? As DougW says 12.5 amps each but that is pushing the
limit of a $6 relay. And to Bill's point, if you have less than 12 volts at
the relay, the current goes up and then you approach the "30 amp rating" of
the relay. You could use a starter solenoid.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:101gjeqd3pp0v62@corp.supernews.com...
> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
> store that the guy insisted would work. so what you guys are using? also
my
> brother in-law has 4 of same lights on his off roader and is also having
> problems finding a relay that works on the 4 lights. any suggestions?
> thanks carmine
>
>
#12
Guest
Posts: n/a
Re: relay for offroad lights?
Could have been bad connections at the relay. Where did the relay melt...
at the terminals? As DougW says 12.5 amps each but that is pushing the
limit of a $6 relay. And to Bill's point, if you have less than 12 volts at
the relay, the current goes up and then you approach the "30 amp rating" of
the relay. You could use a starter solenoid.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:101gjeqd3pp0v62@corp.supernews.com...
> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
> store that the guy insisted would work. so what you guys are using? also
my
> brother in-law has 4 of same lights on his off roader and is also having
> problems finding a relay that works on the 4 lights. any suggestions?
> thanks carmine
>
>
at the terminals? As DougW says 12.5 amps each but that is pushing the
limit of a $6 relay. And to Bill's point, if you have less than 12 volts at
the relay, the current goes up and then you approach the "30 amp rating" of
the relay. You could use a starter solenoid.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:101gjeqd3pp0v62@corp.supernews.com...
> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
> store that the guy insisted would work. so what you guys are using? also
my
> brother in-law has 4 of same lights on his off roader and is also having
> problems finding a relay that works on the 4 lights. any suggestions?
> thanks carmine
>
>
#13
Guest
Posts: n/a
Re: relay for offroad lights?
Could have been bad connections at the relay. Where did the relay melt...
at the terminals? As DougW says 12.5 amps each but that is pushing the
limit of a $6 relay. And to Bill's point, if you have less than 12 volts at
the relay, the current goes up and then you approach the "30 amp rating" of
the relay. You could use a starter solenoid.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:101gjeqd3pp0v62@corp.supernews.com...
> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
> store that the guy insisted would work. so what you guys are using? also
my
> brother in-law has 4 of same lights on his off roader and is also having
> problems finding a relay that works on the 4 lights. any suggestions?
> thanks carmine
>
>
at the terminals? As DougW says 12.5 amps each but that is pushing the
limit of a $6 relay. And to Bill's point, if you have less than 12 volts at
the relay, the current goes up and then you approach the "30 amp rating" of
the relay. You could use a starter solenoid.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Jet" <jet@bestweb.net> wrote in message
news:101gjeqd3pp0v62@corp.supernews.com...
> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
> store that the guy insisted would work. so what you guys are using? also
my
> brother in-law has 4 of same lights on his off roader and is also having
> problems finding a relay that works on the 4 lights. any suggestions?
> thanks carmine
>
>
#14
Guest
Posts: n/a
Re: relay for offroad lights?
Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
> Jet did pass the time by typing:
>> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
>> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
>> store that the guy insisted would work. so what you guys are using? also my
>> brother in-law has 4 of same lights on his off roader and is also having
>> problems finding a relay that works on the 4 lights. any suggestions?
>> thanks carmine
>
> Your going to have to go to a local electronics parts store.
Or try MCM Newark at www.mcmelectronics.com
>
> 150W @ 12V = 12.5A but that's not counting warmup draw
I'd go for something like a 25 Amp relay at 12 volts for that
and think seriously about mercury wetted contacts.
>
> The cheap solution, run one relay per light.
With the added advantage you never lose both.
Bosch makes some heavy duty ones, but PITA to use as they
are socketed.
--
Now that Spirit Rover has confirmed the presence of weapons of
mass destruction on Mars, we are preparing to invade...
> Jet did pass the time by typing:
>> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
>> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
>> store that the guy insisted would work. so what you guys are using? also my
>> brother in-law has 4 of same lights on his off roader and is also having
>> problems finding a relay that works on the 4 lights. any suggestions?
>> thanks carmine
>
> Your going to have to go to a local electronics parts store.
Or try MCM Newark at www.mcmelectronics.com
>
> 150W @ 12V = 12.5A but that's not counting warmup draw
I'd go for something like a 25 Amp relay at 12 volts for that
and think seriously about mercury wetted contacts.
>
> The cheap solution, run one relay per light.
With the added advantage you never lose both.
Bosch makes some heavy duty ones, but PITA to use as they
are socketed.
--
Now that Spirit Rover has confirmed the presence of weapons of
mass destruction on Mars, we are preparing to invade...
#15
Guest
Posts: n/a
Re: relay for offroad lights?
Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
> Jet did pass the time by typing:
>> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
>> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
>> store that the guy insisted would work. so what you guys are using? also my
>> brother in-law has 4 of same lights on his off roader and is also having
>> problems finding a relay that works on the 4 lights. any suggestions?
>> thanks carmine
>
> Your going to have to go to a local electronics parts store.
Or try MCM Newark at www.mcmelectronics.com
>
> 150W @ 12V = 12.5A but that's not counting warmup draw
I'd go for something like a 25 Amp relay at 12 volts for that
and think seriously about mercury wetted contacts.
>
> The cheap solution, run one relay per light.
With the added advantage you never lose both.
Bosch makes some heavy duty ones, but PITA to use as they
are socketed.
--
Now that Spirit Rover has confirmed the presence of weapons of
mass destruction on Mars, we are preparing to invade...
> Jet did pass the time by typing:
>> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
>> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
>> store that the guy insisted would work. so what you guys are using? also my
>> brother in-law has 4 of same lights on his off roader and is also having
>> problems finding a relay that works on the 4 lights. any suggestions?
>> thanks carmine
>
> Your going to have to go to a local electronics parts store.
Or try MCM Newark at www.mcmelectronics.com
>
> 150W @ 12V = 12.5A but that's not counting warmup draw
I'd go for something like a 25 Amp relay at 12 volts for that
and think seriously about mercury wetted contacts.
>
> The cheap solution, run one relay per light.
With the added advantage you never lose both.
Bosch makes some heavy duty ones, but PITA to use as they
are socketed.
--
Now that Spirit Rover has confirmed the presence of weapons of
mass destruction on Mars, we are preparing to invade...
#16
Guest
Posts: n/a
Re: relay for offroad lights?
Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
> Jet did pass the time by typing:
>> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
>> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
>> store that the guy insisted would work. so what you guys are using? also my
>> brother in-law has 4 of same lights on his off roader and is also having
>> problems finding a relay that works on the 4 lights. any suggestions?
>> thanks carmine
>
> Your going to have to go to a local electronics parts store.
Or try MCM Newark at www.mcmelectronics.com
>
> 150W @ 12V = 12.5A but that's not counting warmup draw
I'd go for something like a 25 Amp relay at 12 volts for that
and think seriously about mercury wetted contacts.
>
> The cheap solution, run one relay per light.
With the added advantage you never lose both.
Bosch makes some heavy duty ones, but PITA to use as they
are socketed.
--
Now that Spirit Rover has confirmed the presence of weapons of
mass destruction on Mars, we are preparing to invade...
> Jet did pass the time by typing:
>> I have a set of 150 watt 385,000 candle power KC offroad lights on my jeep
>> and I melted a 30 amp relay. it was a $6 relay I bought at the auto parts
>> store that the guy insisted would work. so what you guys are using? also my
>> brother in-law has 4 of same lights on his off roader and is also having
>> problems finding a relay that works on the 4 lights. any suggestions?
>> thanks carmine
>
> Your going to have to go to a local electronics parts store.
Or try MCM Newark at www.mcmelectronics.com
>
> 150W @ 12V = 12.5A but that's not counting warmup draw
I'd go for something like a 25 Amp relay at 12 volts for that
and think seriously about mercury wetted contacts.
>
> The cheap solution, run one relay per light.
With the added advantage you never lose both.
Bosch makes some heavy duty ones, but PITA to use as they
are socketed.
--
Now that Spirit Rover has confirmed the presence of weapons of
mass destruction on Mars, we are preparing to invade...
#17
Guest
Posts: n/a
Re: relay for offroad lights?
Good point, Lon, on the Bosch relays. They are socketed, but you can buy
the socket prewired, so all you have to do is cut and splice. In my
opinion, there is a reason that the major manufacturers use Bosch relays.
There are dozens on any given car, and they generally last the life of the
vehicle.
Jerry
"L0nD0t.$t0we11" <"L0nD0t.$t0we11"@ComcastDot.Net> wrote in message
news:Ff%Rb.135536$sv6.726888@attbi_s52...
> Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
>
> > Jet did pass the time by typing:
> >> I have a set of 150 watt 385,000 candle power KC offroad lights on my
jeep
> >> and I melted a 30 amp relay. it was a $6 relay I bought at the auto
parts
> >> store that the guy insisted would work. so what you guys are using?
also my
> >> brother in-law has 4 of same lights on his off roader and is also
having
> >> problems finding a relay that works on the 4 lights. any suggestions?
> >> thanks carmine
> >
> > Your going to have to go to a local electronics parts store.
>
> Or try MCM Newark at www.mcmelectronics.com
> >
> > 150W @ 12V = 12.5A but that's not counting warmup draw
>
> I'd go for something like a 25 Amp relay at 12 volts for that
> and think seriously about mercury wetted contacts.
>
> >
> > The cheap solution, run one relay per light.
>
> With the added advantage you never lose both.
>
> Bosch makes some heavy duty ones, but PITA to use as they
> are socketed.
>
>
> --
> Now that Spirit Rover has confirmed the presence of weapons of
> mass destruction on Mars, we are preparing to invade...
>
the socket prewired, so all you have to do is cut and splice. In my
opinion, there is a reason that the major manufacturers use Bosch relays.
There are dozens on any given car, and they generally last the life of the
vehicle.
Jerry
"L0nD0t.$t0we11" <"L0nD0t.$t0we11"@ComcastDot.Net> wrote in message
news:Ff%Rb.135536$sv6.726888@attbi_s52...
> Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
>
> > Jet did pass the time by typing:
> >> I have a set of 150 watt 385,000 candle power KC offroad lights on my
jeep
> >> and I melted a 30 amp relay. it was a $6 relay I bought at the auto
parts
> >> store that the guy insisted would work. so what you guys are using?
also my
> >> brother in-law has 4 of same lights on his off roader and is also
having
> >> problems finding a relay that works on the 4 lights. any suggestions?
> >> thanks carmine
> >
> > Your going to have to go to a local electronics parts store.
>
> Or try MCM Newark at www.mcmelectronics.com
> >
> > 150W @ 12V = 12.5A but that's not counting warmup draw
>
> I'd go for something like a 25 Amp relay at 12 volts for that
> and think seriously about mercury wetted contacts.
>
> >
> > The cheap solution, run one relay per light.
>
> With the added advantage you never lose both.
>
> Bosch makes some heavy duty ones, but PITA to use as they
> are socketed.
>
>
> --
> Now that Spirit Rover has confirmed the presence of weapons of
> mass destruction on Mars, we are preparing to invade...
>
#18
Guest
Posts: n/a
Re: relay for offroad lights?
Good point, Lon, on the Bosch relays. They are socketed, but you can buy
the socket prewired, so all you have to do is cut and splice. In my
opinion, there is a reason that the major manufacturers use Bosch relays.
There are dozens on any given car, and they generally last the life of the
vehicle.
Jerry
"L0nD0t.$t0we11" <"L0nD0t.$t0we11"@ComcastDot.Net> wrote in message
news:Ff%Rb.135536$sv6.726888@attbi_s52...
> Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
>
> > Jet did pass the time by typing:
> >> I have a set of 150 watt 385,000 candle power KC offroad lights on my
jeep
> >> and I melted a 30 amp relay. it was a $6 relay I bought at the auto
parts
> >> store that the guy insisted would work. so what you guys are using?
also my
> >> brother in-law has 4 of same lights on his off roader and is also
having
> >> problems finding a relay that works on the 4 lights. any suggestions?
> >> thanks carmine
> >
> > Your going to have to go to a local electronics parts store.
>
> Or try MCM Newark at www.mcmelectronics.com
> >
> > 150W @ 12V = 12.5A but that's not counting warmup draw
>
> I'd go for something like a 25 Amp relay at 12 volts for that
> and think seriously about mercury wetted contacts.
>
> >
> > The cheap solution, run one relay per light.
>
> With the added advantage you never lose both.
>
> Bosch makes some heavy duty ones, but PITA to use as they
> are socketed.
>
>
> --
> Now that Spirit Rover has confirmed the presence of weapons of
> mass destruction on Mars, we are preparing to invade...
>
the socket prewired, so all you have to do is cut and splice. In my
opinion, there is a reason that the major manufacturers use Bosch relays.
There are dozens on any given car, and they generally last the life of the
vehicle.
Jerry
"L0nD0t.$t0we11" <"L0nD0t.$t0we11"@ComcastDot.Net> wrote in message
news:Ff%Rb.135536$sv6.726888@attbi_s52...
> Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
>
> > Jet did pass the time by typing:
> >> I have a set of 150 watt 385,000 candle power KC offroad lights on my
jeep
> >> and I melted a 30 amp relay. it was a $6 relay I bought at the auto
parts
> >> store that the guy insisted would work. so what you guys are using?
also my
> >> brother in-law has 4 of same lights on his off roader and is also
having
> >> problems finding a relay that works on the 4 lights. any suggestions?
> >> thanks carmine
> >
> > Your going to have to go to a local electronics parts store.
>
> Or try MCM Newark at www.mcmelectronics.com
> >
> > 150W @ 12V = 12.5A but that's not counting warmup draw
>
> I'd go for something like a 25 Amp relay at 12 volts for that
> and think seriously about mercury wetted contacts.
>
> >
> > The cheap solution, run one relay per light.
>
> With the added advantage you never lose both.
>
> Bosch makes some heavy duty ones, but PITA to use as they
> are socketed.
>
>
> --
> Now that Spirit Rover has confirmed the presence of weapons of
> mass destruction on Mars, we are preparing to invade...
>
#19
Guest
Posts: n/a
Re: relay for offroad lights?
Good point, Lon, on the Bosch relays. They are socketed, but you can buy
the socket prewired, so all you have to do is cut and splice. In my
opinion, there is a reason that the major manufacturers use Bosch relays.
There are dozens on any given car, and they generally last the life of the
vehicle.
Jerry
"L0nD0t.$t0we11" <"L0nD0t.$t0we11"@ComcastDot.Net> wrote in message
news:Ff%Rb.135536$sv6.726888@attbi_s52...
> Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
>
> > Jet did pass the time by typing:
> >> I have a set of 150 watt 385,000 candle power KC offroad lights on my
jeep
> >> and I melted a 30 amp relay. it was a $6 relay I bought at the auto
parts
> >> store that the guy insisted would work. so what you guys are using?
also my
> >> brother in-law has 4 of same lights on his off roader and is also
having
> >> problems finding a relay that works on the 4 lights. any suggestions?
> >> thanks carmine
> >
> > Your going to have to go to a local electronics parts store.
>
> Or try MCM Newark at www.mcmelectronics.com
> >
> > 150W @ 12V = 12.5A but that's not counting warmup draw
>
> I'd go for something like a 25 Amp relay at 12 volts for that
> and think seriously about mercury wetted contacts.
>
> >
> > The cheap solution, run one relay per light.
>
> With the added advantage you never lose both.
>
> Bosch makes some heavy duty ones, but PITA to use as they
> are socketed.
>
>
> --
> Now that Spirit Rover has confirmed the presence of weapons of
> mass destruction on Mars, we are preparing to invade...
>
the socket prewired, so all you have to do is cut and splice. In my
opinion, there is a reason that the major manufacturers use Bosch relays.
There are dozens on any given car, and they generally last the life of the
vehicle.
Jerry
"L0nD0t.$t0we11" <"L0nD0t.$t0we11"@ComcastDot.Net> wrote in message
news:Ff%Rb.135536$sv6.726888@attbi_s52...
> Roughly 1/28/04 16:25, DougW's monkeys randomly typed:
>
> > Jet did pass the time by typing:
> >> I have a set of 150 watt 385,000 candle power KC offroad lights on my
jeep
> >> and I melted a 30 amp relay. it was a $6 relay I bought at the auto
parts
> >> store that the guy insisted would work. so what you guys are using?
also my
> >> brother in-law has 4 of same lights on his off roader and is also
having
> >> problems finding a relay that works on the 4 lights. any suggestions?
> >> thanks carmine
> >
> > Your going to have to go to a local electronics parts store.
>
> Or try MCM Newark at www.mcmelectronics.com
> >
> > 150W @ 12V = 12.5A but that's not counting warmup draw
>
> I'd go for something like a 25 Amp relay at 12 volts for that
> and think seriously about mercury wetted contacts.
>
> >
> > The cheap solution, run one relay per light.
>
> With the added advantage you never lose both.
>
> Bosch makes some heavy duty ones, but PITA to use as they
> are socketed.
>
>
> --
> Now that Spirit Rover has confirmed the presence of weapons of
> mass destruction on Mars, we are preparing to invade...
>
#20
Guest
Posts: n/a
Re: relay for offroad lights?
"Jerry Newton" <figatmcttelecom.com> wrote in message
news:4018f58b$1_3@newspeer2.tds.net...
> Good point, Lon, on the Bosch relays. They are socketed, but you can buy
> the socket prewired, so all you have to do is cut and splice. In my
> opinion, there is a reason that the major manufacturers use Bosch relays.
> There are dozens on any given car, and they generally last the life of the
> vehicle.
I just plug in connectors without sockets. I get 6 or more of them for free
from every european car I see heading for the scrap yard. BMW's Bosch relays
have the terminals in the same configuration, but are wired differently, but
have the schematic on the case.
--
Paul Calman, Hathaway Pines, California
news:4018f58b$1_3@newspeer2.tds.net...
> Good point, Lon, on the Bosch relays. They are socketed, but you can buy
> the socket prewired, so all you have to do is cut and splice. In my
> opinion, there is a reason that the major manufacturers use Bosch relays.
> There are dozens on any given car, and they generally last the life of the
> vehicle.
I just plug in connectors without sockets. I get 6 or more of them for free
from every european car I see heading for the scrap yard. BMW's Bosch relays
have the terminals in the same configuration, but are wired differently, but
have the schematic on the case.
--
Paul Calman, Hathaway Pines, California