Rear tail light bolts
03-05-2007, 02:04 PM
#1
Guest
Posts: n/a
Rear tail light bolts
I have a 2000 Jeep Cherokee and I was going to replace the passenger
side rear tial light but when I went to do so the socket set that I
have which has standard and metric sizes did not fit the bolt. Does
anyone know what size socket will work on the bolt?
ANy help will be greatly appreciated.
side rear tial light but when I went to do so the socket set that I
have which has standard and metric sizes did not fit the bolt. Does
anyone know what size socket will work on the bolt?
ANy help will be greatly appreciated.
03-05-2007, 06:00 PM
#2
Guest
Posts: n/a
Re: Rear tail light bolts
Usually it's a Phillips screwdriver:
http://www.----------.com/temp/01XJtailLight.pdf
But yours is probably a torx:
http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
f**k with your mind.
God Bless America, Bill 0|||||||0
mailto:--------------------
<redinak@gmail.com> wrote in message
news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/01XJtailLight.pdf
But yours is probably a torx:
http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
f**k with your mind.
God Bless America, Bill 0|||||||0
mailto:--------------------
<redinak@gmail.com> wrote in message
news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
03-05-2007, 06:00 PM
#3
Guest
Posts: n/a
Re: Rear tail light bolts
Usually it's a Phillips screwdriver:
http://www.----------.com/temp/01XJtailLight.pdf
But yours is probably a torx:
http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
f**k with your mind.
God Bless America, Bill 0|||||||0
mailto:--------------------
<redinak@gmail.com> wrote in message
news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/01XJtailLight.pdf
But yours is probably a torx:
http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
f**k with your mind.
God Bless America, Bill 0|||||||0
mailto:--------------------
<redinak@gmail.com> wrote in message
news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
03-05-2007, 06:00 PM
#4
Guest
Posts: n/a
Re: Rear tail light bolts
Usually it's a Phillips screwdriver:
http://www.----------.com/temp/01XJtailLight.pdf
But yours is probably a torx:
http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
f**k with your mind.
God Bless America, Bill 0|||||||0
mailto:--------------------
<redinak@gmail.com> wrote in message
news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/01XJtailLight.pdf
But yours is probably a torx:
http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
f**k with your mind.
God Bless America, Bill 0|||||||0
mailto:--------------------
<redinak@gmail.com> wrote in message
news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
--
Posted via a free Usenet account from http://www.teranews.com
03-05-2007, 06:33 PM
#5
Guest
Posts: n/a
Re: Rear tail light bolts
Bill, it's actually a trick to get a bolt head, that you can get a
reasonable amount of torque on, made out of cheap *** metal. That is my
analysis anyway, and my pre-German Wrangler has them too.
Earle
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
> Usually it's a Phillips screwdriver:
> http://www.----------.com/temp/01XJtailLight.pdf
> But yours is probably a torx:
> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
> f**k with your mind.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> <redinak@gmail.com> wrote in message
> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> > I have a 2000 Jeep Cherokee and I was going to replace the passenger
> > side rear tial light but when I went to do so the socket set that I
> > have which has standard and metric sizes did not fit the bolt. Does
> > anyone know what size socket will work on the bolt?
> > ANy help will be greatly appreciated.
> >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
reasonable amount of torque on, made out of cheap *** metal. That is my
analysis anyway, and my pre-German Wrangler has them too.
Earle
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
> Usually it's a Phillips screwdriver:
> http://www.----------.com/temp/01XJtailLight.pdf
> But yours is probably a torx:
> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
> f**k with your mind.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> <redinak@gmail.com> wrote in message
> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> > I have a 2000 Jeep Cherokee and I was going to replace the passenger
> > side rear tial light but when I went to do so the socket set that I
> > have which has standard and metric sizes did not fit the bolt. Does
> > anyone know what size socket will work on the bolt?
> > ANy help will be greatly appreciated.
> >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-05-2007, 06:33 PM
#6
Guest
Posts: n/a
Re: Rear tail light bolts
Bill, it's actually a trick to get a bolt head, that you can get a
reasonable amount of torque on, made out of cheap *** metal. That is my
analysis anyway, and my pre-German Wrangler has them too.
Earle
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
> Usually it's a Phillips screwdriver:
> http://www.----------.com/temp/01XJtailLight.pdf
> But yours is probably a torx:
> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
> f**k with your mind.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> <redinak@gmail.com> wrote in message
> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> > I have a 2000 Jeep Cherokee and I was going to replace the passenger
> > side rear tial light but when I went to do so the socket set that I
> > have which has standard and metric sizes did not fit the bolt. Does
> > anyone know what size socket will work on the bolt?
> > ANy help will be greatly appreciated.
> >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
reasonable amount of torque on, made out of cheap *** metal. That is my
analysis anyway, and my pre-German Wrangler has them too.
Earle
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
> Usually it's a Phillips screwdriver:
> http://www.----------.com/temp/01XJtailLight.pdf
> But yours is probably a torx:
> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
> f**k with your mind.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> <redinak@gmail.com> wrote in message
> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> > I have a 2000 Jeep Cherokee and I was going to replace the passenger
> > side rear tial light but when I went to do so the socket set that I
> > have which has standard and metric sizes did not fit the bolt. Does
> > anyone know what size socket will work on the bolt?
> > ANy help will be greatly appreciated.
> >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-05-2007, 06:33 PM
#7
Guest
Posts: n/a
Re: Rear tail light bolts
Bill, it's actually a trick to get a bolt head, that you can get a
reasonable amount of torque on, made out of cheap *** metal. That is my
analysis anyway, and my pre-German Wrangler has them too.
Earle
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
> Usually it's a Phillips screwdriver:
> http://www.----------.com/temp/01XJtailLight.pdf
> But yours is probably a torx:
> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
> f**k with your mind.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> <redinak@gmail.com> wrote in message
> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> > I have a 2000 Jeep Cherokee and I was going to replace the passenger
> > side rear tial light but when I went to do so the socket set that I
> > have which has standard and metric sizes did not fit the bolt. Does
> > anyone know what size socket will work on the bolt?
> > ANy help will be greatly appreciated.
> >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
reasonable amount of torque on, made out of cheap *** metal. That is my
analysis anyway, and my pre-German Wrangler has them too.
Earle
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
> Usually it's a Phillips screwdriver:
> http://www.----------.com/temp/01XJtailLight.pdf
> But yours is probably a torx:
> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
> f**k with your mind.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> <redinak@gmail.com> wrote in message
> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
> > I have a 2000 Jeep Cherokee and I was going to replace the passenger
> > side rear tial light but when I went to do so the socket set that I
> > have which has standard and metric sizes did not fit the bolt. Does
> > anyone know what size socket will work on the bolt?
> > ANy help will be greatly appreciated.
> >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-05-2007, 07:24 PM
#8
Guest
Posts: n/a
Re: Rear tail light bolts
I have a memory of Jeep having one of those 6.5 mm I think it is sockets
needed someplace? I know I have one and I know I have done a taillight.
I am going to remove a couple more tomorrow or in the next couple days
and will check...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
>> Usually it's a Phillips screwdriver:
>> http://www.----------.com/temp/01XJtailLight.pdf
>> But yours is probably a torx:
>> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
>> f**k with your mind.
>> God Bless America, Bill 0|||||||0
>> mailto:--------------------
>>
>> <redinak@gmail.com> wrote in message
>> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
>>> I have a 2000 Jeep Cherokee and I was going to replace the passenger
>>> side rear tial light but when I went to do so the socket set that I
>>> have which has standard and metric sizes did not fit the bolt. Does
>>> anyone know what size socket will work on the bolt?
>>> ANy help will be greatly appreciated.
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
needed someplace? I know I have one and I know I have done a taillight.
I am going to remove a couple more tomorrow or in the next couple days
and will check...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
>> Usually it's a Phillips screwdriver:
>> http://www.----------.com/temp/01XJtailLight.pdf
>> But yours is probably a torx:
>> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
>> f**k with your mind.
>> God Bless America, Bill 0|||||||0
>> mailto:--------------------
>>
>> <redinak@gmail.com> wrote in message
>> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
>>> I have a 2000 Jeep Cherokee and I was going to replace the passenger
>>> side rear tial light but when I went to do so the socket set that I
>>> have which has standard and metric sizes did not fit the bolt. Does
>>> anyone know what size socket will work on the bolt?
>>> ANy help will be greatly appreciated.
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
03-05-2007, 07:24 PM
#9
Guest
Posts: n/a
Re: Rear tail light bolts
I have a memory of Jeep having one of those 6.5 mm I think it is sockets
needed someplace? I know I have one and I know I have done a taillight.
I am going to remove a couple more tomorrow or in the next couple days
and will check...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
>> Usually it's a Phillips screwdriver:
>> http://www.----------.com/temp/01XJtailLight.pdf
>> But yours is probably a torx:
>> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
>> f**k with your mind.
>> God Bless America, Bill 0|||||||0
>> mailto:--------------------
>>
>> <redinak@gmail.com> wrote in message
>> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
>>> I have a 2000 Jeep Cherokee and I was going to replace the passenger
>>> side rear tial light but when I went to do so the socket set that I
>>> have which has standard and metric sizes did not fit the bolt. Does
>>> anyone know what size socket will work on the bolt?
>>> ANy help will be greatly appreciated.
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
needed someplace? I know I have one and I know I have done a taillight.
I am going to remove a couple more tomorrow or in the next couple days
and will check...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
>> Usually it's a Phillips screwdriver:
>> http://www.----------.com/temp/01XJtailLight.pdf
>> But yours is probably a torx:
>> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
>> f**k with your mind.
>> God Bless America, Bill 0|||||||0
>> mailto:--------------------
>>
>> <redinak@gmail.com> wrote in message
>> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
>>> I have a 2000 Jeep Cherokee and I was going to replace the passenger
>>> side rear tial light but when I went to do so the socket set that I
>>> have which has standard and metric sizes did not fit the bolt. Does
>>> anyone know what size socket will work on the bolt?
>>> ANy help will be greatly appreciated.
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
03-05-2007, 07:24 PM
#10
Guest
Posts: n/a
Re: Rear tail light bolts
I have a memory of Jeep having one of those 6.5 mm I think it is sockets
needed someplace? I know I have one and I know I have done a taillight.
I am going to remove a couple more tomorrow or in the next couple days
and will check...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
>> Usually it's a Phillips screwdriver:
>> http://www.----------.com/temp/01XJtailLight.pdf
>> But yours is probably a torx:
>> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
>> f**k with your mind.
>> God Bless America, Bill 0|||||||0
>> mailto:--------------------
>>
>> <redinak@gmail.com> wrote in message
>> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
>>> I have a 2000 Jeep Cherokee and I was going to replace the passenger
>>> side rear tial light but when I went to do so the socket set that I
>>> have which has standard and metric sizes did not fit the bolt. Does
>>> anyone know what size socket will work on the bolt?
>>> ANy help will be greatly appreciated.
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
needed someplace? I know I have one and I know I have done a taillight.
I am going to remove a couple more tomorrow or in the next couple days
and will check...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
>
> "L.W. (Bill) ------ III" <----------@***.net> wrote in message
> news:45ec94de$0$16381$88260bb3@free.teranews.com.. .
>> Usually it's a Phillips screwdriver:
>> http://www.----------.com/temp/01XJtailLight.pdf
>> But yours is probably a torx:
>> http://www.sans-fils.org/IMG/jpg/Pal...-Torx_6x40.jpg A German trick to
>> f**k with your mind.
>> God Bless America, Bill 0|||||||0
>> mailto:--------------------
>>
>> <redinak@gmail.com> wrote in message
>> news:1173121486.105269.230030@c51g2000cwc.googlegr oups.com...
>>> I have a 2000 Jeep Cherokee and I was going to replace the passenger
>>> side rear tial light but when I went to do so the socket set that I
>>> have which has standard and metric sizes did not fit the bolt. Does
>>> anyone know what size socket will work on the bolt?
>>> ANy help will be greatly appreciated.
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>
