Rear tail light bolts
03-06-2007, 09:34 PM
#11
Guest
Posts: n/a
Re: Rear tail light bolts
OK, I'll blame it on the frogs along with their diesel and transmission
failures.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:df2dncdTa9VLOHHYnZ2dnUVZ_qyjnZ2d@comcast.com. ..
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
failures.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:df2dncdTa9VLOHHYnZ2dnUVZ_qyjnZ2d@comcast.com. ..
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
03-06-2007, 09:34 PM
#12
Guest
Posts: n/a
Re: Rear tail light bolts
OK, I'll blame it on the frogs along with their diesel and transmission
failures.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:df2dncdTa9VLOHHYnZ2dnUVZ_qyjnZ2d@comcast.com. ..
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
failures.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:df2dncdTa9VLOHHYnZ2dnUVZ_qyjnZ2d@comcast.com. ..
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
03-06-2007, 09:34 PM
#13
Guest
Posts: n/a
Re: Rear tail light bolts
OK, I'll blame it on the frogs along with their diesel and transmission
failures.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:df2dncdTa9VLOHHYnZ2dnUVZ_qyjnZ2d@comcast.com. ..
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
failures.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:df2dncdTa9VLOHHYnZ2dnUVZ_qyjnZ2d@comcast.com. ..
> Bill, it's actually a trick to get a bolt head, that you can get a
> reasonable amount of torque on, made out of cheap *** metal. That is my
> analysis anyway, and my pre-German Wrangler has them too.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
03-07-2007, 01:06 PM
#14
Guest
Posts: n/a
Re: Rear tail light bolts
redinak@gmail.com wrote:
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
The ones on my 87 are 10 mm.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
The ones on my 87 are 10 mm.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-07-2007, 01:06 PM
#15
Guest
Posts: n/a
Re: Rear tail light bolts
redinak@gmail.com wrote:
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
The ones on my 87 are 10 mm.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
The ones on my 87 are 10 mm.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-07-2007, 01:06 PM
#16
Guest
Posts: n/a
Re: Rear tail light bolts
redinak@gmail.com wrote:
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
The ones on my 87 are 10 mm.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> I have a 2000 Jeep Cherokee and I was going to replace the passenger
> side rear tial light but when I went to do so the socket set that I
> have which has standard and metric sizes did not fit the bolt. Does
> anyone know what size socket will work on the bolt?
> ANy help will be greatly appreciated.
>
The ones on my 87 are 10 mm.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Thread
Thread Starter
Forum
Replies
Last Post
carid
Jeep & 4x4 Items For Sale
0
08-19-2015 07:43 AM
benlangham@email.com
Jeep Mailing List
3
02-12-2005 03:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
