Rear main seal
10-05-2006, 11:54 PM
#1
Guest
Posts: n/a
Rear main seal
Hey...........
Looking for some advice
My rear main seal started leaking and I noticed they sell 2 types
A 1 lip or 2 lip seal.
Can I use both or do I have to install a 1 lip if it has a 1 lip
Are 2 lip seals better ????
Any experience ???
Any advice welcome
88 YJ 4.2L auto
Ollie
10-06-2006, 04:05 AM
#2
Guest
Posts: n/a
Re: Rear main seal
Hi Ollie,
I not familiar with a seal with lips, some gear box seals use an
inner and outer dust shield. Usually the leak we see from the
bellhousing is coming from the rear of the valve cover. take a rag and
wipe it and again after a trip. Main seal: http://www.neow.org/rms1.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
I not familiar with a seal with lips, some gear box seals use an
inner and outer dust shield. Usually the leak we see from the
bellhousing is coming from the rear of the valve cover. take a rag and
wipe it and again after a trip. Main seal: http://www.neow.org/rms1.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
10-06-2006, 04:05 AM
#3
Guest
Posts: n/a
Re: Rear main seal
Hi Ollie,
I not familiar with a seal with lips, some gear box seals use an
inner and outer dust shield. Usually the leak we see from the
bellhousing is coming from the rear of the valve cover. take a rag and
wipe it and again after a trip. Main seal: http://www.neow.org/rms1.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
I not familiar with a seal with lips, some gear box seals use an
inner and outer dust shield. Usually the leak we see from the
bellhousing is coming from the rear of the valve cover. take a rag and
wipe it and again after a trip. Main seal: http://www.neow.org/rms1.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
10-06-2006, 04:05 AM
#4
Guest
Posts: n/a
Re: Rear main seal
Hi Ollie,
I not familiar with a seal with lips, some gear box seals use an
inner and outer dust shield. Usually the leak we see from the
bellhousing is coming from the rear of the valve cover. take a rag and
wipe it and again after a trip. Main seal: http://www.neow.org/rms1.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
I not familiar with a seal with lips, some gear box seals use an
inner and outer dust shield. Usually the leak we see from the
bellhousing is coming from the rear of the valve cover. take a rag and
wipe it and again after a trip. Main seal: http://www.neow.org/rms1.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
10-06-2006, 09:23 AM
#5
Guest
Posts: n/a
Re: Rear main seal
You should run your engine then take a clean rag and wipe the rear of
the head below the valve cover to see if the leak is coming from there.
They leak there lots and it imitates a blown rear main seal.
I have never heard of different seals for that engine if it is the seal
gone. They are two piece seals that can be put in by removing the oil
pan. No need to remove the whole engine or tranny.
If they have 2 seals on the shelf they think fit, I would buy both and
just return the wrong one. If they grumble about the return, go to a
real parts store or even the dealer and just get the proper one to
start.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
the head below the valve cover to see if the leak is coming from there.
They leak there lots and it imitates a blown rear main seal.
I have never heard of different seals for that engine if it is the seal
gone. They are two piece seals that can be put in by removing the oil
pan. No need to remove the whole engine or tranny.
If they have 2 seals on the shelf they think fit, I would buy both and
just return the wrong one. If they grumble about the return, go to a
real parts store or even the dealer and just get the proper one to
start.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
10-06-2006, 09:23 AM
#6
Guest
Posts: n/a
Re: Rear main seal
You should run your engine then take a clean rag and wipe the rear of
the head below the valve cover to see if the leak is coming from there.
They leak there lots and it imitates a blown rear main seal.
I have never heard of different seals for that engine if it is the seal
gone. They are two piece seals that can be put in by removing the oil
pan. No need to remove the whole engine or tranny.
If they have 2 seals on the shelf they think fit, I would buy both and
just return the wrong one. If they grumble about the return, go to a
real parts store or even the dealer and just get the proper one to
start.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
the head below the valve cover to see if the leak is coming from there.
They leak there lots and it imitates a blown rear main seal.
I have never heard of different seals for that engine if it is the seal
gone. They are two piece seals that can be put in by removing the oil
pan. No need to remove the whole engine or tranny.
If they have 2 seals on the shelf they think fit, I would buy both and
just return the wrong one. If they grumble about the return, go to a
real parts store or even the dealer and just get the proper one to
start.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
10-06-2006, 09:23 AM
#7
Guest
Posts: n/a
Re: Rear main seal
You should run your engine then take a clean rag and wipe the rear of
the head below the valve cover to see if the leak is coming from there.
They leak there lots and it imitates a blown rear main seal.
I have never heard of different seals for that engine if it is the seal
gone. They are two piece seals that can be put in by removing the oil
pan. No need to remove the whole engine or tranny.
If they have 2 seals on the shelf they think fit, I would buy both and
just return the wrong one. If they grumble about the return, go to a
real parts store or even the dealer and just get the proper one to
start.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
the head below the valve cover to see if the leak is coming from there.
They leak there lots and it imitates a blown rear main seal.
I have never heard of different seals for that engine if it is the seal
gone. They are two piece seals that can be put in by removing the oil
pan. No need to remove the whole engine or tranny.
If they have 2 seals on the shelf they think fit, I would buy both and
just return the wrong one. If they grumble about the return, go to a
real parts store or even the dealer and just get the proper one to
start.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
JohanB wrote:
>
> Hey...........
>
> Looking for some advice
>
> My rear main seal started leaking and I noticed they sell 2 types
>
> A 1 lip or 2 lip seal.
>
> Can I use both or do I have to install a 1 lip if it has a 1 lip
>
> Are 2 lip seals better ????
>
> Any experience ???
>
> Any advice welcome
>
> 88 YJ 4.2L auto
>
> Ollie
10-06-2006, 11:28 PM
#8
Guest
Posts: n/a
Re: Rear main seal
Thanks for your response
Notsure if this link works but they are selling 1 with a 1 lip design and a
double lip design...
Not buying from this store but its just an example
See
http://www.partsamerica.com/ProductL...+Main+Seal+Set
And no, its not the valve cover :-(
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452658BF.24539CB3@sympatico.ca...
> You should run your engine then take a clean rag and wipe the rear of
> the head below the valve cover to see if the leak is coming from there.
> They leak there lots and it imitates a blown rear main seal.
>
> I have never heard of different seals for that engine if it is the seal
> gone. They are two piece seals that can be put in by removing the oil
> pan. No need to remove the whole engine or tranny.
>
> If they have 2 seals on the shelf they think fit, I would buy both and
> just return the wrong one. If they grumble about the return, go to a
> real parts store or even the dealer and just get the proper one to
> start.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> JohanB wrote:
>>
>> Hey...........
>>
>> Looking for some advice
>>
>> My rear main seal started leaking and I noticed they sell 2 types
>>
>> A 1 lip or 2 lip seal.
>>
>> Can I use both or do I have to install a 1 lip if it has a 1 lip
>>
>> Are 2 lip seals better ????
>>
>> Any experience ???
>>
>> Any advice welcome
>>
>> 88 YJ 4.2L auto
>>
>> Ollie
Notsure if this link works but they are selling 1 with a 1 lip design and a
double lip design...
Not buying from this store but its just an example
See
http://www.partsamerica.com/ProductL...+Main+Seal+Set
And no, its not the valve cover :-(
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452658BF.24539CB3@sympatico.ca...
> You should run your engine then take a clean rag and wipe the rear of
> the head below the valve cover to see if the leak is coming from there.
> They leak there lots and it imitates a blown rear main seal.
>
> I have never heard of different seals for that engine if it is the seal
> gone. They are two piece seals that can be put in by removing the oil
> pan. No need to remove the whole engine or tranny.
>
> If they have 2 seals on the shelf they think fit, I would buy both and
> just return the wrong one. If they grumble about the return, go to a
> real parts store or even the dealer and just get the proper one to
> start.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> JohanB wrote:
>>
>> Hey...........
>>
>> Looking for some advice
>>
>> My rear main seal started leaking and I noticed they sell 2 types
>>
>> A 1 lip or 2 lip seal.
>>
>> Can I use both or do I have to install a 1 lip if it has a 1 lip
>>
>> Are 2 lip seals better ????
>>
>> Any experience ???
>>
>> Any advice welcome
>>
>> 88 YJ 4.2L auto
>>
>> Ollie
10-06-2006, 11:28 PM
#9
Guest
Posts: n/a
Re: Rear main seal
Thanks for your response
Notsure if this link works but they are selling 1 with a 1 lip design and a
double lip design...
Not buying from this store but its just an example
See
http://www.partsamerica.com/ProductL...+Main+Seal+Set
And no, its not the valve cover :-(
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452658BF.24539CB3@sympatico.ca...
> You should run your engine then take a clean rag and wipe the rear of
> the head below the valve cover to see if the leak is coming from there.
> They leak there lots and it imitates a blown rear main seal.
>
> I have never heard of different seals for that engine if it is the seal
> gone. They are two piece seals that can be put in by removing the oil
> pan. No need to remove the whole engine or tranny.
>
> If they have 2 seals on the shelf they think fit, I would buy both and
> just return the wrong one. If they grumble about the return, go to a
> real parts store or even the dealer and just get the proper one to
> start.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> JohanB wrote:
>>
>> Hey...........
>>
>> Looking for some advice
>>
>> My rear main seal started leaking and I noticed they sell 2 types
>>
>> A 1 lip or 2 lip seal.
>>
>> Can I use both or do I have to install a 1 lip if it has a 1 lip
>>
>> Are 2 lip seals better ????
>>
>> Any experience ???
>>
>> Any advice welcome
>>
>> 88 YJ 4.2L auto
>>
>> Ollie
Notsure if this link works but they are selling 1 with a 1 lip design and a
double lip design...
Not buying from this store but its just an example
See
http://www.partsamerica.com/ProductL...+Main+Seal+Set
And no, its not the valve cover :-(
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452658BF.24539CB3@sympatico.ca...
> You should run your engine then take a clean rag and wipe the rear of
> the head below the valve cover to see if the leak is coming from there.
> They leak there lots and it imitates a blown rear main seal.
>
> I have never heard of different seals for that engine if it is the seal
> gone. They are two piece seals that can be put in by removing the oil
> pan. No need to remove the whole engine or tranny.
>
> If they have 2 seals on the shelf they think fit, I would buy both and
> just return the wrong one. If they grumble about the return, go to a
> real parts store or even the dealer and just get the proper one to
> start.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> JohanB wrote:
>>
>> Hey...........
>>
>> Looking for some advice
>>
>> My rear main seal started leaking and I noticed they sell 2 types
>>
>> A 1 lip or 2 lip seal.
>>
>> Can I use both or do I have to install a 1 lip if it has a 1 lip
>>
>> Are 2 lip seals better ????
>>
>> Any experience ???
>>
>> Any advice welcome
>>
>> 88 YJ 4.2L auto
>>
>> Ollie
10-06-2006, 11:28 PM
#10
Guest
Posts: n/a
Re: Rear main seal
Thanks for your response
Notsure if this link works but they are selling 1 with a 1 lip design and a
double lip design...
Not buying from this store but its just an example
See
http://www.partsamerica.com/ProductL...+Main+Seal+Set
And no, its not the valve cover :-(
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452658BF.24539CB3@sympatico.ca...
> You should run your engine then take a clean rag and wipe the rear of
> the head below the valve cover to see if the leak is coming from there.
> They leak there lots and it imitates a blown rear main seal.
>
> I have never heard of different seals for that engine if it is the seal
> gone. They are two piece seals that can be put in by removing the oil
> pan. No need to remove the whole engine or tranny.
>
> If they have 2 seals on the shelf they think fit, I would buy both and
> just return the wrong one. If they grumble about the return, go to a
> real parts store or even the dealer and just get the proper one to
> start.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> JohanB wrote:
>>
>> Hey...........
>>
>> Looking for some advice
>>
>> My rear main seal started leaking and I noticed they sell 2 types
>>
>> A 1 lip or 2 lip seal.
>>
>> Can I use both or do I have to install a 1 lip if it has a 1 lip
>>
>> Are 2 lip seals better ????
>>
>> Any experience ???
>>
>> Any advice welcome
>>
>> 88 YJ 4.2L auto
>>
>> Ollie
Notsure if this link works but they are selling 1 with a 1 lip design and a
double lip design...
Not buying from this store but its just an example
See
http://www.partsamerica.com/ProductL...+Main+Seal+Set
And no, its not the valve cover :-(
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452658BF.24539CB3@sympatico.ca...
> You should run your engine then take a clean rag and wipe the rear of
> the head below the valve cover to see if the leak is coming from there.
> They leak there lots and it imitates a blown rear main seal.
>
> I have never heard of different seals for that engine if it is the seal
> gone. They are two piece seals that can be put in by removing the oil
> pan. No need to remove the whole engine or tranny.
>
> If they have 2 seals on the shelf they think fit, I would buy both and
> just return the wrong one. If they grumble about the return, go to a
> real parts store or even the dealer and just get the proper one to
> start.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> JohanB wrote:
>>
>> Hey...........
>>
>> Looking for some advice
>>
>> My rear main seal started leaking and I noticed they sell 2 types
>>
>> A 1 lip or 2 lip seal.
>>
>> Can I use both or do I have to install a 1 lip if it has a 1 lip
>>
>> Are 2 lip seals better ????
>>
>> Any experience ???
>>
>> Any advice welcome
>>
>> 88 YJ 4.2L auto
>>
>> Ollie