Re: Weber Carb Revisited
#31
Guest
Posts: n/a
Re: Weber Carb Revisited
< I talked to a guy at
carbs.net and he said just turn the idle screw in unitl I'm happy, and that
it won't hurt anything. >
The carb and engine are running great with the
> idle screw set at 3 turns, so I'm not complaining about performance. I
> just got concerned when the weber tech support guy told me that running
the
> speed screw in at more than 1 1/2 turns would dump gas into the crank case
> and destroy the engine.
LOL! ;-)
Redline-Weber's instructions are meant to get you to a baseline with the
idle mixture screws, you can than set the idle spee screw where ever you
want it. As a check, you may want to take tit to a shop that can check the
exhaust CO readings.
carbs.net and he said just turn the idle screw in unitl I'm happy, and that
it won't hurt anything. >
The carb and engine are running great with the
> idle screw set at 3 turns, so I'm not complaining about performance. I
> just got concerned when the weber tech support guy told me that running
the
> speed screw in at more than 1 1/2 turns would dump gas into the crank case
> and destroy the engine.
LOL! ;-)
Redline-Weber's instructions are meant to get you to a baseline with the
idle mixture screws, you can than set the idle spee screw where ever you
want it. As a check, you may want to take tit to a shop that can check the
exhaust CO readings.
#32
Guest
Posts: n/a
Re: Weber Carb Revisited
< I talked to a guy at
carbs.net and he said just turn the idle screw in unitl I'm happy, and that
it won't hurt anything. >
The carb and engine are running great with the
> idle screw set at 3 turns, so I'm not complaining about performance. I
> just got concerned when the weber tech support guy told me that running
the
> speed screw in at more than 1 1/2 turns would dump gas into the crank case
> and destroy the engine.
LOL! ;-)
Redline-Weber's instructions are meant to get you to a baseline with the
idle mixture screws, you can than set the idle spee screw where ever you
want it. As a check, you may want to take tit to a shop that can check the
exhaust CO readings.
carbs.net and he said just turn the idle screw in unitl I'm happy, and that
it won't hurt anything. >
The carb and engine are running great with the
> idle screw set at 3 turns, so I'm not complaining about performance. I
> just got concerned when the weber tech support guy told me that running
the
> speed screw in at more than 1 1/2 turns would dump gas into the crank case
> and destroy the engine.
LOL! ;-)
Redline-Weber's instructions are meant to get you to a baseline with the
idle mixture screws, you can than set the idle spee screw where ever you
want it. As a check, you may want to take tit to a shop that can check the
exhaust CO readings.
#33
Guest
Posts: n/a
Re: Weber Carb Revisited
< I talked to a guy at
carbs.net and he said just turn the idle screw in unitl I'm happy, and that
it won't hurt anything. >
The carb and engine are running great with the
> idle screw set at 3 turns, so I'm not complaining about performance. I
> just got concerned when the weber tech support guy told me that running
the
> speed screw in at more than 1 1/2 turns would dump gas into the crank case
> and destroy the engine.
LOL! ;-)
Redline-Weber's instructions are meant to get you to a baseline with the
idle mixture screws, you can than set the idle spee screw where ever you
want it. As a check, you may want to take tit to a shop that can check the
exhaust CO readings.
carbs.net and he said just turn the idle screw in unitl I'm happy, and that
it won't hurt anything. >
The carb and engine are running great with the
> idle screw set at 3 turns, so I'm not complaining about performance. I
> just got concerned when the weber tech support guy told me that running
the
> speed screw in at more than 1 1/2 turns would dump gas into the crank case
> and destroy the engine.
LOL! ;-)
Redline-Weber's instructions are meant to get you to a baseline with the
idle mixture screws, you can than set the idle spee screw where ever you
want it. As a check, you may want to take tit to a shop that can check the
exhaust CO readings.
#34
Guest
Posts: n/a
Re: Weber Carb Revisited
I
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
#35
Guest
Posts: n/a
Re: Weber Carb Revisited
I
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
#36
Guest
Posts: n/a
Re: Weber Carb Revisited
I
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
#37
Guest
Posts: n/a
Re: Weber Carb Revisited
I
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
>just got concerned when the weber tech support guy told me that running the
>speed screw in at more than 1 1/2 turns would dump gas into the crank case
>and destroy the engine.
Don't worry about it, if that was true then running the engine
at partial throttle in traffic would do it too - after all, the screw
is doing the same thing you do with the gas pedal.
Tookie - Denham Springs, LA
88YJ, 4" lift, 33" TSLs, Lock-Rights
PosiLock, 4.10s
#38
Guest
Posts: n/a
Re: Weber Carb Revisited
The screw was not more than 1.75 to2 turns in from the contact with the
stop lever. Meaning only an extra 1/4 to 1/2 turn was added from the initial
setup.
Brian
"Sleestak" <here@there.com> wrote in message
news:106o819eom23qb5@corp.supernews.com...
> Thanks for the info Brian. I bought this carb new from www.carbs.net.
I'll
> try setting it up with the vacs plugged. btw, how far in do you run your
> idle speed screw?
>
> Thanks again.
#39
Guest
Posts: n/a
Re: Weber Carb Revisited
The screw was not more than 1.75 to2 turns in from the contact with the
stop lever. Meaning only an extra 1/4 to 1/2 turn was added from the initial
setup.
Brian
"Sleestak" <here@there.com> wrote in message
news:106o819eom23qb5@corp.supernews.com...
> Thanks for the info Brian. I bought this carb new from www.carbs.net.
I'll
> try setting it up with the vacs plugged. btw, how far in do you run your
> idle speed screw?
>
> Thanks again.
#40
Guest
Posts: n/a
Re: Weber Carb Revisited
The screw was not more than 1.75 to2 turns in from the contact with the
stop lever. Meaning only an extra 1/4 to 1/2 turn was added from the initial
setup.
Brian
"Sleestak" <here@there.com> wrote in message
news:106o819eom23qb5@corp.supernews.com...
> Thanks for the info Brian. I bought this carb new from www.carbs.net.
I'll
> try setting it up with the vacs plugged. btw, how far in do you run your
> idle speed screw?
>
> Thanks again.