Don't know the size, but when I am 'replacing' a hose or pipe like that
I just cut the sucker off and use a deep socket instead of the wrench.
Works much better.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Mark E. Bye wrote:
> I'm gearing up to replace the high pressure power steering hose on my
> '93 XJ 4.0L. To do it right, looks like I need to invest in a new
> tool... a flare nut wrench. Anyone know the exact size of the nuts on
> this hose and the fluid reservoir? 16mm?
>
> Thanks for any help.
>
> Mark
> '93 XJ

 

On Thu, 07 Jun 2007 11:08:50 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>Don't know the size, but when I am 'replacing' a hose or pipe like that
>I just cut the sucker off and use a deep socket instead of the wrench.
>Works much better.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's - Gone to the rust pile...
>Canadian Off Road Trips Photos: Non members can still view!
>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>(More Off Road album links at bottom of the view page)
>
>Mark E. Bye wrote:
>> I'm gearing up to replace the high pressure power steering hose on my
>> '93 XJ 4.0L. To do it right, looks like I need to invest in a new
>> tool... a flare nut wrench. Anyone know the exact size of the nuts on
>> this hose and the fluid reservoir? 16mm?
>>
>> Thanks for any help.
>>
>> Mark
>> '93 XJ

Thanks Mike! That works great on the old hose, but I don't think I
want to do that with the new one! HAHAHA!!

Anyway, I've learned through trial and error that the nut on the fluid
reservoir end is a 16mm. The nut on the other end is an 18mm.

Mark
'93 XJ

 

On Thu, 07 Jun 2007 11:08:50 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>Don't know the size, but when I am 'replacing' a hose or pipe like that
>I just cut the sucker off and use a deep socket instead of the wrench.
>Works much better.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's - Gone to the rust pile...
>Canadian Off Road Trips Photos: Non members can still view!
>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>(More Off Road album links at bottom of the view page)
>
>Mark E. Bye wrote:
>> I'm gearing up to replace the high pressure power steering hose on my
>> '93 XJ 4.0L. To do it right, looks like I need to invest in a new
>> tool... a flare nut wrench. Anyone know the exact size of the nuts on
>> this hose and the fluid reservoir? 16mm?
>>
>> Thanks for any help.
>>
>> Mark
>> '93 XJ

Thanks Mike! That works great on the old hose, but I don't think I
want to do that with the new one! HAHAHA!!

Anyway, I've learned through trial and error that the nut on the fluid
reservoir end is a 16mm. The nut on the other end is an 18mm.

Mark
'93 XJ

 

On Thu, 07 Jun 2007 11:08:50 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>Don't know the size, but when I am 'replacing' a hose or pipe like that
>I just cut the sucker off and use a deep socket instead of the wrench.
>Works much better.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's - Gone to the rust pile...
>Canadian Off Road Trips Photos: Non members can still view!
>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>(More Off Road album links at bottom of the view page)
>
>Mark E. Bye wrote:
>> I'm gearing up to replace the high pressure power steering hose on my
>> '93 XJ 4.0L. To do it right, looks like I need to invest in a new
>> tool... a flare nut wrench. Anyone know the exact size of the nuts on
>> this hose and the fluid reservoir? 16mm?
>>
>> Thanks for any help.
>>
>> Mark
>> '93 XJ

Thanks Mike! That works great on the old hose, but I don't think I
want to do that with the new one! HAHAHA!!

Anyway, I've learned through trial and error that the nut on the fluid
reservoir end is a 16mm. The nut on the other end is an 18mm.

Mark
'93 XJ

 

On Thu, 07 Jun 2007 11:08:50 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>Don't know the size, but when I am 'replacing' a hose or pipe like that
>I just cut the sucker off and use a deep socket instead of the wrench.
>Works much better.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's - Gone to the rust pile...
>Canadian Off Road Trips Photos: Non members can still view!
>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>(More Off Road album links at bottom of the view page)
>
>Mark E. Bye wrote:
>> I'm gearing up to replace the high pressure power steering hose on my
>> '93 XJ 4.0L. To do it right, looks like I need to invest in a new
>> tool... a flare nut wrench. Anyone know the exact size of the nuts on
>> this hose and the fluid reservoir? 16mm?
>>
>> Thanks for any help.
>>
>> Mark
>> '93 XJ

Thanks Mike! That works great on the old hose, but I don't think I
want to do that with the new one! HAHAHA!!

Anyway, I've learned through trial and error that the nut on the fluid
reservoir end is a 16mm. The nut on the other end is an 18mm.

Mark
'93 XJ