Mike Romain

That exact thing happened to my tenant on his 85.

Took him an hour and a half to get 5 miles home after he picked it up as
the shop was closing for the day. Drive 100 yds, let the smoke stop,
drive another 100, etc...

I checked out everything for him.

It was a bad master cylinder rebuild. You need to take it back.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Gifer wrote:
>
> Hi,
>
> I had my Jeep worked on by a rape artist... ok, a jeep whiz, and he replaced
> the master cylinder because it was full of dirt, etc. This was after he
> rebuilt the rear end. I usually work on it myself, but I didn't have the
> tools for the rear end job.
>
> He bled the rear brakes after replacing the wheel cylinders, which were
> bad... I know that myself. I found out that he didn't bleed the front
> brakes, cause he broke off the bleed screw and said the hell with it I
> guess. Anyway, when I picked up the Jeep, the brake pedal was setting about
> 4" higher to my foot than before, and travel was about 1.5".
>
> The next day I was driving it, and realized, that the front brakes were not
> releasing. I replaced the calipers cause they were badly rusted, etc., and I
> thought that disturbing the break fluid and not bleeding them caused the old
> ones to finally stick.
>
> That didn't help at all. The only way I can drive it, is to NOT snug the
> front brake line at the master cylinder, so the front brakes can bleed off
> after stopping!
>
> I know... what about the mechanic? He was closed today, and will open on
> Tuesday... I will talk to him then. But I was wondering, what is it? I think
> it is the wrong master cylinder. The equalizer block works, else loosing the
> fitting at the master cylinder wouldn't matter, right?
>
> Let me know your thoughts!
>
> J