Re: Carbon Deposits?
10-02-2003, 05:48 PM
#1
Guest
Posts: n/a
Re: Carbon Deposits?
Paul Brogren did pass the time by typing:
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
at operating temperature.
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
at operating temperature.
10-02-2003, 05:48 PM
#2
Guest
Posts: n/a
Re: Carbon Deposits?
Paul Brogren did pass the time by typing:
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
at operating temperature.
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
at operating temperature.
10-02-2003, 05:48 PM
#3
Guest
Posts: n/a
Re: Carbon Deposits?
Paul Brogren did pass the time by typing:
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
at operating temperature.
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
at operating temperature.
10-02-2003, 05:57 PM
#4
Guest
Posts: n/a
Re: Carbon Deposits?
Approximately 10/2/03 15:48, Paul Brogren uttered for posterity:
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
You want the *small* amounts of water to flash into steam as soon
as it hits the combustion chamber. If the engine is too cold,
the water may cause it to stall or stumble, then you have to try
to get it started again.
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
You want the *small* amounts of water to flash into steam as soon
as it hits the combustion chamber. If the engine is too cold,
the water may cause it to stall or stumble, then you have to try
to get it started again.
10-02-2003, 05:57 PM
#5
Guest
Posts: n/a
Re: Carbon Deposits?
Approximately 10/2/03 15:48, Paul Brogren uttered for posterity:
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
You want the *small* amounts of water to flash into steam as soon
as it hits the combustion chamber. If the engine is too cold,
the water may cause it to stall or stumble, then you have to try
to get it started again.
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
You want the *small* amounts of water to flash into steam as soon
as it hits the combustion chamber. If the engine is too cold,
the water may cause it to stall or stumble, then you have to try
to get it started again.
10-02-2003, 05:57 PM
#6
Guest
Posts: n/a
Re: Carbon Deposits?
Approximately 10/2/03 15:48, Paul Brogren uttered for posterity:
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
You want the *small* amounts of water to flash into steam as soon
as it hits the combustion chamber. If the engine is too cold,
the water may cause it to stall or stumble, then you have to try
to get it started again.
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed up
> to temp?
You want the *small* amounts of water to flash into steam as soon
as it hits the combustion chamber. If the engine is too cold,
the water may cause it to stall or stumble, then you have to try
to get it started again.
10-02-2003, 09:14 PM
#8
Guest
Posts: n/a
Re: Carbon Deposits?
Success!!! That worked pretty good. Did the water thing through a spray
bottle. I did it twice. Between checking the spark plugs/piston tops. The
first run 16 oz. water seemed to take about half off. I shot another 16 oz.
through, but now it's too dark in the parking lot. I'll check in the AM.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Paul Brogren" <pibrogren@msn.com> wrote in message
news:bli693$clrbo$1@ID-190695.news.uni-berlin.de...
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed
up
> to temp?
>
> Thanks Again,
> Paul
>
>
bottle. I did it twice. Between checking the spark plugs/piston tops. The
first run 16 oz. water seemed to take about half off. I shot another 16 oz.
through, but now it's too dark in the parking lot. I'll check in the AM.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Paul Brogren" <pibrogren@msn.com> wrote in message
news:bli693$clrbo$1@ID-190695.news.uni-berlin.de...
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed
up
> to temp?
>
> Thanks Again,
> Paul
>
>
10-02-2003, 09:14 PM
#9
Guest
Posts: n/a
Re: Carbon Deposits?
Success!!! That worked pretty good. Did the water thing through a spray
bottle. I did it twice. Between checking the spark plugs/piston tops. The
first run 16 oz. water seemed to take about half off. I shot another 16 oz.
through, but now it's too dark in the parking lot. I'll check in the AM.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Paul Brogren" <pibrogren@msn.com> wrote in message
news:bli693$clrbo$1@ID-190695.news.uni-berlin.de...
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed
up
> to temp?
>
> Thanks Again,
> Paul
>
>
bottle. I did it twice. Between checking the spark plugs/piston tops. The
first run 16 oz. water seemed to take about half off. I shot another 16 oz.
through, but now it's too dark in the parking lot. I'll check in the AM.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Paul Brogren" <pibrogren@msn.com> wrote in message
news:bli693$clrbo$1@ID-190695.news.uni-berlin.de...
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed
up
> to temp?
>
> Thanks Again,
> Paul
>
>
10-02-2003, 09:14 PM
#10
Guest
Posts: n/a
Re: Carbon Deposits?
Success!!! That worked pretty good. Did the water thing through a spray
bottle. I did it twice. Between checking the spark plugs/piston tops. The
first run 16 oz. water seemed to take about half off. I shot another 16 oz.
through, but now it's too dark in the parking lot. I'll check in the AM.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Paul Brogren" <pibrogren@msn.com> wrote in message
news:bli693$clrbo$1@ID-190695.news.uni-berlin.de...
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed
up
> to temp?
>
> Thanks Again,
> Paul
>
>
bottle. I did it twice. Between checking the spark plugs/piston tops. The
first run 16 oz. water seemed to take about half off. I shot another 16 oz.
through, but now it's too dark in the parking lot. I'll check in the AM.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Paul Brogren" <pibrogren@msn.com> wrote in message
news:bli693$clrbo$1@ID-190695.news.uni-berlin.de...
> Does the engine need to be at normal temperature when adding water through
> the carb? Wasn't sure if it should be done when engine is cool or warmed
up
> to temp?
>
> Thanks Again,
> Paul
>
>
