Quick question about YJ 4 banger...
10-28-2003, 08:15 PM
#31
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
Then only with your thumb and forefinger:
http://www.----------.com/nutdriver.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Earle Horton wrote:
>
> Earle's tip for assemblies like this: Use a nut driver, not a wrench or
> socket.
>
> Earle
http://www.----------.com/nutdriver.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Earle Horton wrote:
>
> Earle's tip for assemblies like this: Use a nut driver, not a wrench or
> socket.
>
> Earle
10-28-2003, 10:07 PM
#32
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
For a more permanent solution I'd go with the gasket (ie, for the valve
cover). For a less permanent solution such as regularily replacing diff
fluids, etc... I'd go with a blue silicone gasket maker. Where I'm located a
gasket maker is about $3/tube where a gasket is considerably more moola and
almost never in stock.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
cover). For a less permanent solution such as regularily replacing diff
fluids, etc... I'd go with a blue silicone gasket maker. Where I'm located a
gasket maker is about $3/tube where a gasket is considerably more moola and
almost never in stock.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-28-2003, 10:07 PM
#33
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
For a more permanent solution I'd go with the gasket (ie, for the valve
cover). For a less permanent solution such as regularily replacing diff
fluids, etc... I'd go with a blue silicone gasket maker. Where I'm located a
gasket maker is about $3/tube where a gasket is considerably more moola and
almost never in stock.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
cover). For a less permanent solution such as regularily replacing diff
fluids, etc... I'd go with a blue silicone gasket maker. Where I'm located a
gasket maker is about $3/tube where a gasket is considerably more moola and
almost never in stock.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-28-2003, 10:07 PM
#34
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
For a more permanent solution I'd go with the gasket (ie, for the valve
cover). For a less permanent solution such as regularily replacing diff
fluids, etc... I'd go with a blue silicone gasket maker. Where I'm located a
gasket maker is about $3/tube where a gasket is considerably more moola and
almost never in stock.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
cover). For a less permanent solution such as regularily replacing diff
fluids, etc... I'd go with a blue silicone gasket maker. Where I'm located a
gasket maker is about $3/tube where a gasket is considerably more moola and
almost never in stock.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-29-2003, 12:52 AM
#35
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
Why not leave it up to your fav supplier and see if the gasket is actually
in stock. Depending on how much of a rush you're in, the gasket maker may be
your tie breaker.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-56E4AB.18204928102003@corp.newsfeeds.com...
> In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
> "Redge Egder" <RedgeEgder@hotmail.com> wrote:
>
> > For a more permanent solution I'd go with the gasket
>
> O.K., 1 for gasket
>
> > (ie, for the valve cover). For a less permanent solution such as
> > regularily replacing diff fluids, etc... I'd go with a blue silicone
> > gasket maker.
>
> 1 for gasket maker
>
> > Where I'm located a gasket maker is about $3/tube where
> > a gasket is considerably more moola and almost never in stock.
>
> :^) Still a tie!
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
in stock. Depending on how much of a rush you're in, the gasket maker may be
your tie breaker.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-56E4AB.18204928102003@corp.newsfeeds.com...
> In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
> "Redge Egder" <RedgeEgder@hotmail.com> wrote:
>
> > For a more permanent solution I'd go with the gasket
>
> O.K., 1 for gasket
>
> > (ie, for the valve cover). For a less permanent solution such as
> > regularily replacing diff fluids, etc... I'd go with a blue silicone
> > gasket maker.
>
> 1 for gasket maker
>
> > Where I'm located a gasket maker is about $3/tube where
> > a gasket is considerably more moola and almost never in stock.
>
> :^) Still a tie!
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-29-2003, 12:52 AM
#36
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
Why not leave it up to your fav supplier and see if the gasket is actually
in stock. Depending on how much of a rush you're in, the gasket maker may be
your tie breaker.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-56E4AB.18204928102003@corp.newsfeeds.com...
> In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
> "Redge Egder" <RedgeEgder@hotmail.com> wrote:
>
> > For a more permanent solution I'd go with the gasket
>
> O.K., 1 for gasket
>
> > (ie, for the valve cover). For a less permanent solution such as
> > regularily replacing diff fluids, etc... I'd go with a blue silicone
> > gasket maker.
>
> 1 for gasket maker
>
> > Where I'm located a gasket maker is about $3/tube where
> > a gasket is considerably more moola and almost never in stock.
>
> :^) Still a tie!
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
in stock. Depending on how much of a rush you're in, the gasket maker may be
your tie breaker.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-56E4AB.18204928102003@corp.newsfeeds.com...
> In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
> "Redge Egder" <RedgeEgder@hotmail.com> wrote:
>
> > For a more permanent solution I'd go with the gasket
>
> O.K., 1 for gasket
>
> > (ie, for the valve cover). For a less permanent solution such as
> > regularily replacing diff fluids, etc... I'd go with a blue silicone
> > gasket maker.
>
> 1 for gasket maker
>
> > Where I'm located a gasket maker is about $3/tube where
> > a gasket is considerably more moola and almost never in stock.
>
> :^) Still a tie!
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-29-2003, 12:52 AM
#37
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
Why not leave it up to your fav supplier and see if the gasket is actually
in stock. Depending on how much of a rush you're in, the gasket maker may be
your tie breaker.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-56E4AB.18204928102003@corp.newsfeeds.com...
> In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
> "Redge Egder" <RedgeEgder@hotmail.com> wrote:
>
> > For a more permanent solution I'd go with the gasket
>
> O.K., 1 for gasket
>
> > (ie, for the valve cover). For a less permanent solution such as
> > regularily replacing diff fluids, etc... I'd go with a blue silicone
> > gasket maker.
>
> 1 for gasket maker
>
> > Where I'm located a gasket maker is about $3/tube where
> > a gasket is considerably more moola and almost never in stock.
>
> :^) Still a tie!
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
in stock. Depending on how much of a rush you're in, the gasket maker may be
your tie breaker.
~ ~ ~ ~ ~ ~
Redge Egder
'92, i6 4.0/5spd, 4" of Sky, D30/35's (4.56's) with 33's bolted on the ends.
http://members.attcanada.ca/~kaessie/jeepin/
Inquiro Et Invenio...
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-56E4AB.18204928102003@corp.newsfeeds.com...
> In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
> "Redge Egder" <RedgeEgder@hotmail.com> wrote:
>
> > For a more permanent solution I'd go with the gasket
>
> O.K., 1 for gasket
>
> > (ie, for the valve cover). For a less permanent solution such as
> > regularily replacing diff fluids, etc... I'd go with a blue silicone
> > gasket maker.
>
> 1 for gasket maker
>
> > Where I'm located a gasket maker is about $3/tube where
> > a gasket is considerably more moola and almost never in stock.
>
> :^) Still a tie!
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-29-2003, 09:42 AM
#38
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
In article <Z1Gnb.39584$Ol.925780@read1.cgocable.net>,
"Redge Egder" <RedgeEgder@hotmail.com> wrote:
> Why not leave it up to your fav supplier and see if the gasket is actually
> in stock. Depending on how much of a rush you're in, the gasket maker may be
> your tie breaker.
How true!
Thanks all!
I don't have a TCM for it yet and needed to do something about it pretty
soon. Looks like I will be installing her Tuffy trunk this weekend
instead.
Time for a new thread about the tank...
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Redge Egder" <RedgeEgder@hotmail.com> wrote:
> Why not leave it up to your fav supplier and see if the gasket is actually
> in stock. Depending on how much of a rush you're in, the gasket maker may be
> your tie breaker.
How true!
Thanks all!
I don't have a TCM for it yet and needed to do something about it pretty
soon. Looks like I will be installing her Tuffy trunk this weekend
instead.
Time for a new thread about the tank...
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-29-2003, 09:42 AM
#39
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
In article <Z1Gnb.39584$Ol.925780@read1.cgocable.net>,
"Redge Egder" <RedgeEgder@hotmail.com> wrote:
> Why not leave it up to your fav supplier and see if the gasket is actually
> in stock. Depending on how much of a rush you're in, the gasket maker may be
> your tie breaker.
How true!
Thanks all!
I don't have a TCM for it yet and needed to do something about it pretty
soon. Looks like I will be installing her Tuffy trunk this weekend
instead.
Time for a new thread about the tank...
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Redge Egder" <RedgeEgder@hotmail.com> wrote:
> Why not leave it up to your fav supplier and see if the gasket is actually
> in stock. Depending on how much of a rush you're in, the gasket maker may be
> your tie breaker.
How true!
Thanks all!
I don't have a TCM for it yet and needed to do something about it pretty
soon. Looks like I will be installing her Tuffy trunk this weekend
instead.
Time for a new thread about the tank...
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
10-29-2003, 09:42 AM
#40
Guest
Posts: n/a
Re: Quick question about YJ 4 banger...
In article <Z1Gnb.39584$Ol.925780@read1.cgocable.net>,
"Redge Egder" <RedgeEgder@hotmail.com> wrote:
> Why not leave it up to your fav supplier and see if the gasket is actually
> in stock. Depending on how much of a rush you're in, the gasket maker may be
> your tie breaker.
How true!
Thanks all!
I don't have a TCM for it yet and needed to do something about it pretty
soon. Looks like I will be installing her Tuffy trunk this weekend
instead.
Time for a new thread about the tank...
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Redge Egder" <RedgeEgder@hotmail.com> wrote:
> Why not leave it up to your fav supplier and see if the gasket is actually
> in stock. Depending on how much of a rush you're in, the gasket maker may be
> your tie breaker.
How true!
Thanks all!
I don't have a TCM for it yet and needed to do something about it pretty
soon. Looks like I will be installing her Tuffy trunk this weekend
instead.
Time for a new thread about the tank...
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Thread
Thread Starter
Forum
Replies
Last Post
D McMorris
Jeep Mailing List
16
08-14-2003 12:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
