Quick disconects
#31
Guest
Posts: n/a
Re: Quick disconects
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> I'm a newbie still....first TJ '03
>
> I've decided that I'm going to make my own quick disconnects...thanks to
> Chad Fraker for his post to my question of which brand to go with and he
> told me to save my money and showed me these plans
> http://hookedonjeeps.rockcrawler.com...%20Discos.html
> BUT...... I have no time to make them before trail run on sunday..... how
> hard is it to remove the sway bars for the run then put them back on
> after???
> as long as I'm on level ground this is not too bad??
> or should I just run stock a few times first....remebering I'm a newbie
with
> an '03 TJ....30" GSA's
> Thanks...lookin' forward to the opinions of others, Jeff
>
Hmm, this reminds me, maybe I'll untie my sway bars and reconnect them from
that trip I took in '01...
coop
#32
Guest
Posts: n/a
Re: Quick disconects
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> I'm a newbie still....first TJ '03
>
> I've decided that I'm going to make my own quick disconnects...thanks to
> Chad Fraker for his post to my question of which brand to go with and he
> told me to save my money and showed me these plans
> http://hookedonjeeps.rockcrawler.com...%20Discos.html
> BUT...... I have no time to make them before trail run on sunday..... how
> hard is it to remove the sway bars for the run then put them back on
> after???
> as long as I'm on level ground this is not too bad??
> or should I just run stock a few times first....remebering I'm a newbie
with
> an '03 TJ....30" GSA's
> Thanks...lookin' forward to the opinions of others, Jeff
>
Hmm, this reminds me, maybe I'll untie my sway bars and reconnect them from
that trip I took in '01...
coop
#33
Guest
Posts: n/a
Re: Quick disconects
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> I'm a newbie still....first TJ '03
>
> I've decided that I'm going to make my own quick disconnects...thanks to
> Chad Fraker for his post to my question of which brand to go with and he
> told me to save my money and showed me these plans
> http://hookedonjeeps.rockcrawler.com...%20Discos.html
> BUT...... I have no time to make them before trail run on sunday..... how
> hard is it to remove the sway bars for the run then put them back on
> after???
> as long as I'm on level ground this is not too bad??
> or should I just run stock a few times first....remebering I'm a newbie
with
> an '03 TJ....30" GSA's
> Thanks...lookin' forward to the opinions of others, Jeff
>
Hmm, this reminds me, maybe I'll untie my sway bars and reconnect them from
that trip I took in '01...
coop
#34
Guest
Posts: n/a
Re: Quick disconects
The travel is limited by your shocks, and stock front shocks on the
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
#35
Guest
Posts: n/a
Re: Quick disconects
The travel is limited by your shocks, and stock front shocks on the
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
#36
Guest
Posts: n/a
Re: Quick disconects
The travel is limited by your shocks, and stock front shocks on the
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
#37
Guest
Posts: n/a
Re: Quick disconects
The travel is limited by your shocks, and stock front shocks on the
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
TJ have 7.375" travel, you could figure another couple of inches at
wheels, one high, one low, in their arc. With a lift and longer shocks
the difference isn't much greater as the new bump stops, you see holding
the springs from falling off, also decrease the bottoming out height:
http://www.wanderingtrail.com/RubiMe...p/Dsc01085.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> how big of a 'swing' does it give you on stock vehicles (no lifts)
#38
Guest
Posts: n/a
Re: Quick disconects
uh oh...yer in trouble!! No pic attachments on this group!
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:tGShc.31605$kc2.444891@nnrp1.uunet.ca...
> OK.... all good except if I take the bottom bolt outta the sway bar I
can't
> see how they swing up??
> so I included a pic of mine....
> so whatcha guys think??
>
>
>
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message
> news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> > I'm a newbie still....first TJ '03
> >
> > I've decided that I'm going to make my own quick disconnects...thanks to
> > Chad Fraker for his post to my question of which brand to go with and he
> > told me to save my money and showed me these plans
> > http://hookedonjeeps.rockcrawler.com...%20Discos.html
> > BUT...... I have no time to make them before trail run on sunday.....
how
> > hard is it to remove the sway bars for the run then put them back on
> > after???
> > as long as I'm on level ground this is not too bad??
> > or should I just run stock a few times first....remebering I'm a newbie
> with
> > an '03 TJ....30" GSA's
> > Thanks...lookin' forward to the opinions of others, Jeff
> >
> >
>
>
>
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:tGShc.31605$kc2.444891@nnrp1.uunet.ca...
> OK.... all good except if I take the bottom bolt outta the sway bar I
can't
> see how they swing up??
> so I included a pic of mine....
> so whatcha guys think??
>
>
>
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message
> news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> > I'm a newbie still....first TJ '03
> >
> > I've decided that I'm going to make my own quick disconnects...thanks to
> > Chad Fraker for his post to my question of which brand to go with and he
> > told me to save my money and showed me these plans
> > http://hookedonjeeps.rockcrawler.com...%20Discos.html
> > BUT...... I have no time to make them before trail run on sunday.....
how
> > hard is it to remove the sway bars for the run then put them back on
> > after???
> > as long as I'm on level ground this is not too bad??
> > or should I just run stock a few times first....remebering I'm a newbie
> with
> > an '03 TJ....30" GSA's
> > Thanks...lookin' forward to the opinions of others, Jeff
> >
> >
>
>
>
#39
Guest
Posts: n/a
Re: Quick disconects
uh oh...yer in trouble!! No pic attachments on this group!
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:tGShc.31605$kc2.444891@nnrp1.uunet.ca...
> OK.... all good except if I take the bottom bolt outta the sway bar I
can't
> see how they swing up??
> so I included a pic of mine....
> so whatcha guys think??
>
>
>
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message
> news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> > I'm a newbie still....first TJ '03
> >
> > I've decided that I'm going to make my own quick disconnects...thanks to
> > Chad Fraker for his post to my question of which brand to go with and he
> > told me to save my money and showed me these plans
> > http://hookedonjeeps.rockcrawler.com...%20Discos.html
> > BUT...... I have no time to make them before trail run on sunday.....
how
> > hard is it to remove the sway bars for the run then put them back on
> > after???
> > as long as I'm on level ground this is not too bad??
> > or should I just run stock a few times first....remebering I'm a newbie
> with
> > an '03 TJ....30" GSA's
> > Thanks...lookin' forward to the opinions of others, Jeff
> >
> >
>
>
>
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:tGShc.31605$kc2.444891@nnrp1.uunet.ca...
> OK.... all good except if I take the bottom bolt outta the sway bar I
can't
> see how they swing up??
> so I included a pic of mine....
> so whatcha guys think??
>
>
>
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message
> news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> > I'm a newbie still....first TJ '03
> >
> > I've decided that I'm going to make my own quick disconnects...thanks to
> > Chad Fraker for his post to my question of which brand to go with and he
> > told me to save my money and showed me these plans
> > http://hookedonjeeps.rockcrawler.com...%20Discos.html
> > BUT...... I have no time to make them before trail run on sunday.....
how
> > hard is it to remove the sway bars for the run then put them back on
> > after???
> > as long as I'm on level ground this is not too bad??
> > or should I just run stock a few times first....remebering I'm a newbie
> with
> > an '03 TJ....30" GSA's
> > Thanks...lookin' forward to the opinions of others, Jeff
> >
> >
>
>
>
#40
Guest
Posts: n/a
Re: Quick disconects
uh oh...yer in trouble!! No pic attachments on this group!
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:tGShc.31605$kc2.444891@nnrp1.uunet.ca...
> OK.... all good except if I take the bottom bolt outta the sway bar I
can't
> see how they swing up??
> so I included a pic of mine....
> so whatcha guys think??
>
>
>
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message
> news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> > I'm a newbie still....first TJ '03
> >
> > I've decided that I'm going to make my own quick disconnects...thanks to
> > Chad Fraker for his post to my question of which brand to go with and he
> > told me to save my money and showed me these plans
> > http://hookedonjeeps.rockcrawler.com...%20Discos.html
> > BUT...... I have no time to make them before trail run on sunday.....
how
> > hard is it to remove the sway bars for the run then put them back on
> > after???
> > as long as I'm on level ground this is not too bad??
> > or should I just run stock a few times first....remebering I'm a newbie
> with
> > an '03 TJ....30" GSA's
> > Thanks...lookin' forward to the opinions of others, Jeff
> >
> >
>
>
>
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:tGShc.31605$kc2.444891@nnrp1.uunet.ca...
> OK.... all good except if I take the bottom bolt outta the sway bar I
can't
> see how they swing up??
> so I included a pic of mine....
> so whatcha guys think??
>
>
>
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message
> news:gWDhc.31375$kc2.440994@nnrp1.uunet.ca...
> > I'm a newbie still....first TJ '03
> >
> > I've decided that I'm going to make my own quick disconnects...thanks to
> > Chad Fraker for his post to my question of which brand to go with and he
> > told me to save my money and showed me these plans
> > http://hookedonjeeps.rockcrawler.com...%20Discos.html
> > BUT...... I have no time to make them before trail run on sunday.....
how
> > hard is it to remove the sway bars for the run then put them back on
> > after???
> > as long as I'm on level ground this is not too bad??
> > or should I just run stock a few times first....remebering I'm a newbie
> with
> > an '03 TJ....30" GSA's
> > Thanks...lookin' forward to the opinions of others, Jeff
> >
> >
>
>
>