A question about rim size...
Guest
Posts: n/a
Re: A question about rim size...
If I get a 225/75/16 or 205/75/16 will this be the same height as my
315/75/16? and what rim width will I need for this tire as a spare? or am I
way off base.
Thanks
Boris
"Boris" <borysd@verizon.net> wrote in message
news:vrKHg.87$N84.62@trnddc08...
> Thank you for the replies so far....I`m going to get one of those 48"
> Farmers Jack`s
> At this point I just want a spare tire... as long it is the same height as
> the other 3 tires I don`t care if it is skinnier. I`m only going to drive
> 10 miles or so until I get the original 35" tire fixed. I`m looking for a
> $50 steel rim and a $100 tire. I`m probably not the sharpest crayon in the
> box when it comes to tires+rim sizes..... could someone suggest a rim and
> a tire....please.
> Thanks
> Boris
> http://public.fotki.com/borysd/
>
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44EE26F2.4C1A92F1@sympatico.ca...
>> Most rims have the size stamped into the back side.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Matt Macchiarolo wrote:
>>>
>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>> the
>>> rim width? it's possible to do without removing the tire, if you want
>>> the
>>> spare to match.
>>>
>>> "Boris" <borysd@verizon.net> wrote in message
>>> news:BIgHg.24142$u1.16868@trnddc05...
>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a spare
>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>> >what
>>> >rim width do I need for a 315/75/16 tire?
>>> > Thanks
>>> > Boris
>>> >
>
>
315/75/16? and what rim width will I need for this tire as a spare? or am I
way off base.
Thanks
Boris
"Boris" <borysd@verizon.net> wrote in message
news:vrKHg.87$N84.62@trnddc08...
> Thank you for the replies so far....I`m going to get one of those 48"
> Farmers Jack`s
> At this point I just want a spare tire... as long it is the same height as
> the other 3 tires I don`t care if it is skinnier. I`m only going to drive
> 10 miles or so until I get the original 35" tire fixed. I`m looking for a
> $50 steel rim and a $100 tire. I`m probably not the sharpest crayon in the
> box when it comes to tires+rim sizes..... could someone suggest a rim and
> a tire....please.
> Thanks
> Boris
> http://public.fotki.com/borysd/
>
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44EE26F2.4C1A92F1@sympatico.ca...
>> Most rims have the size stamped into the back side.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Matt Macchiarolo wrote:
>>>
>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>> the
>>> rim width? it's possible to do without removing the tire, if you want
>>> the
>>> spare to match.
>>>
>>> "Boris" <borysd@verizon.net> wrote in message
>>> news:BIgHg.24142$u1.16868@trnddc05...
>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a spare
>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>> >what
>>> >rim width do I need for a 315/75/16 tire?
>>> > Thanks
>>> > Boris
>>> >
>
>
Guest
Posts: n/a
Re: A question about rim size...
If I get a 225/75/16 or 205/75/16 will this be the same height as my
315/75/16? and what rim width will I need for this tire as a spare? or am I
way off base.
Thanks
Boris
"Boris" <borysd@verizon.net> wrote in message
news:vrKHg.87$N84.62@trnddc08...
> Thank you for the replies so far....I`m going to get one of those 48"
> Farmers Jack`s
> At this point I just want a spare tire... as long it is the same height as
> the other 3 tires I don`t care if it is skinnier. I`m only going to drive
> 10 miles or so until I get the original 35" tire fixed. I`m looking for a
> $50 steel rim and a $100 tire. I`m probably not the sharpest crayon in the
> box when it comes to tires+rim sizes..... could someone suggest a rim and
> a tire....please.
> Thanks
> Boris
> http://public.fotki.com/borysd/
>
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44EE26F2.4C1A92F1@sympatico.ca...
>> Most rims have the size stamped into the back side.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Matt Macchiarolo wrote:
>>>
>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>> the
>>> rim width? it's possible to do without removing the tire, if you want
>>> the
>>> spare to match.
>>>
>>> "Boris" <borysd@verizon.net> wrote in message
>>> news:BIgHg.24142$u1.16868@trnddc05...
>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a spare
>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>> >what
>>> >rim width do I need for a 315/75/16 tire?
>>> > Thanks
>>> > Boris
>>> >
>
>
315/75/16? and what rim width will I need for this tire as a spare? or am I
way off base.
Thanks
Boris
"Boris" <borysd@verizon.net> wrote in message
news:vrKHg.87$N84.62@trnddc08...
> Thank you for the replies so far....I`m going to get one of those 48"
> Farmers Jack`s
> At this point I just want a spare tire... as long it is the same height as
> the other 3 tires I don`t care if it is skinnier. I`m only going to drive
> 10 miles or so until I get the original 35" tire fixed. I`m looking for a
> $50 steel rim and a $100 tire. I`m probably not the sharpest crayon in the
> box when it comes to tires+rim sizes..... could someone suggest a rim and
> a tire....please.
> Thanks
> Boris
> http://public.fotki.com/borysd/
>
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44EE26F2.4C1A92F1@sympatico.ca...
>> Most rims have the size stamped into the back side.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Matt Macchiarolo wrote:
>>>
>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>> the
>>> rim width? it's possible to do without removing the tire, if you want
>>> the
>>> spare to match.
>>>
>>> "Boris" <borysd@verizon.net> wrote in message
>>> news:BIgHg.24142$u1.16868@trnddc05...
>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a spare
>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>> >what
>>> >rim width do I need for a 315/75/16 tire?
>>> > Thanks
>>> > Boris
>>> >
>
>
Guest
Posts: n/a
Re: A question about rim size...
If I get a 225/75/16 or 205/75/16 will this be the same height as my
315/75/16? and what rim width will I need for this tire as a spare? or am I
way off base.
Thanks
Boris
"Boris" <borysd@verizon.net> wrote in message
news:vrKHg.87$N84.62@trnddc08...
> Thank you for the replies so far....I`m going to get one of those 48"
> Farmers Jack`s
> At this point I just want a spare tire... as long it is the same height as
> the other 3 tires I don`t care if it is skinnier. I`m only going to drive
> 10 miles or so until I get the original 35" tire fixed. I`m looking for a
> $50 steel rim and a $100 tire. I`m probably not the sharpest crayon in the
> box when it comes to tires+rim sizes..... could someone suggest a rim and
> a tire....please.
> Thanks
> Boris
> http://public.fotki.com/borysd/
>
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44EE26F2.4C1A92F1@sympatico.ca...
>> Most rims have the size stamped into the back side.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Matt Macchiarolo wrote:
>>>
>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>> the
>>> rim width? it's possible to do without removing the tire, if you want
>>> the
>>> spare to match.
>>>
>>> "Boris" <borysd@verizon.net> wrote in message
>>> news:BIgHg.24142$u1.16868@trnddc05...
>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a spare
>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>> >what
>>> >rim width do I need for a 315/75/16 tire?
>>> > Thanks
>>> > Boris
>>> >
>
>
315/75/16? and what rim width will I need for this tire as a spare? or am I
way off base.
Thanks
Boris
"Boris" <borysd@verizon.net> wrote in message
news:vrKHg.87$N84.62@trnddc08...
> Thank you for the replies so far....I`m going to get one of those 48"
> Farmers Jack`s
> At this point I just want a spare tire... as long it is the same height as
> the other 3 tires I don`t care if it is skinnier. I`m only going to drive
> 10 miles or so until I get the original 35" tire fixed. I`m looking for a
> $50 steel rim and a $100 tire. I`m probably not the sharpest crayon in the
> box when it comes to tires+rim sizes..... could someone suggest a rim and
> a tire....please.
> Thanks
> Boris
> http://public.fotki.com/borysd/
>
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44EE26F2.4C1A92F1@sympatico.ca...
>> Most rims have the size stamped into the back side.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> Matt Macchiarolo wrote:
>>>
>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>> the
>>> rim width? it's possible to do without removing the tire, if you want
>>> the
>>> spare to match.
>>>
>>> "Boris" <borysd@verizon.net> wrote in message
>>> news:BIgHg.24142$u1.16868@trnddc05...
>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a spare
>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>> >what
>>> >rim width do I need for a 315/75/16 tire?
>>> > Thanks
>>> > Boris
>>> >
>
>
Guest
Posts: n/a
Re: A question about rim size...
The larger tire is about 34.6 inches tall while the smaller is 29.3 inches
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
Guest
Posts: n/a
Re: A question about rim size...
The larger tire is about 34.6 inches tall while the smaller is 29.3 inches
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
Guest
Posts: n/a
Re: A question about rim size...
The larger tire is about 34.6 inches tall while the smaller is 29.3 inches
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
Guest
Posts: n/a
Re: A question about rim size...
The larger tire is about 34.6 inches tall while the smaller is 29.3 inches
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
tall.
The smaller tire (stock size) came with a 7 inch rim although you could
safely use down to a 6 inch rim.
If you just need something to get you by (emergency use only) you can
probably get a used 33" (275-285mm) tire on an used 8 inch rim pretty
cheaply.
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
Guest
Posts: n/a
Re: A question about rim size...
Your 315/75/16 tire calculates out to be 34.6" diameter, which will vary
slightly based on rim width and manufacturing variance. The 2 tires you
suggested as spares will be significantly smaller diameter.
To calculate the tire height of metric sized tires, use this formula:
(width*aspect ratio*.000787) + rim diameter = height in inches
This will give you the tire diameter in inches. You're going to need a tire
close to the same width, or a higher aspect ratio to end up with a tire
close to the diameter you are looking for. One other option would be a
larger diameter rim, but that will cost big money for rim and also tire.
if you can find a tire with 80 aspect ratio, 295 and 305 width would be
close, and if you can find 85 aspect ratio, 285 width would be close. I
think these are going to be pretty odd sizes to find, but maybe I'm wrong.
Chris
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
slightly based on rim width and manufacturing variance. The 2 tires you
suggested as spares will be significantly smaller diameter.
To calculate the tire height of metric sized tires, use this formula:
(width*aspect ratio*.000787) + rim diameter = height in inches
This will give you the tire diameter in inches. You're going to need a tire
close to the same width, or a higher aspect ratio to end up with a tire
close to the diameter you are looking for. One other option would be a
larger diameter rim, but that will cost big money for rim and also tire.
if you can find a tire with 80 aspect ratio, 295 and 305 width would be
close, and if you can find 85 aspect ratio, 285 width would be close. I
think these are going to be pretty odd sizes to find, but maybe I'm wrong.
Chris
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
Guest
Posts: n/a
Re: A question about rim size...
Your 315/75/16 tire calculates out to be 34.6" diameter, which will vary
slightly based on rim width and manufacturing variance. The 2 tires you
suggested as spares will be significantly smaller diameter.
To calculate the tire height of metric sized tires, use this formula:
(width*aspect ratio*.000787) + rim diameter = height in inches
This will give you the tire diameter in inches. You're going to need a tire
close to the same width, or a higher aspect ratio to end up with a tire
close to the diameter you are looking for. One other option would be a
larger diameter rim, but that will cost big money for rim and also tire.
if you can find a tire with 80 aspect ratio, 295 and 305 width would be
close, and if you can find 85 aspect ratio, 285 width would be close. I
think these are going to be pretty odd sizes to find, but maybe I'm wrong.
Chris
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
slightly based on rim width and manufacturing variance. The 2 tires you
suggested as spares will be significantly smaller diameter.
To calculate the tire height of metric sized tires, use this formula:
(width*aspect ratio*.000787) + rim diameter = height in inches
This will give you the tire diameter in inches. You're going to need a tire
close to the same width, or a higher aspect ratio to end up with a tire
close to the diameter you are looking for. One other option would be a
larger diameter rim, but that will cost big money for rim and also tire.
if you can find a tire with 80 aspect ratio, 295 and 305 width would be
close, and if you can find 85 aspect ratio, 285 width would be close. I
think these are going to be pretty odd sizes to find, but maybe I'm wrong.
Chris
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
Guest
Posts: n/a
Re: A question about rim size...
Your 315/75/16 tire calculates out to be 34.6" diameter, which will vary
slightly based on rim width and manufacturing variance. The 2 tires you
suggested as spares will be significantly smaller diameter.
To calculate the tire height of metric sized tires, use this formula:
(width*aspect ratio*.000787) + rim diameter = height in inches
This will give you the tire diameter in inches. You're going to need a tire
close to the same width, or a higher aspect ratio to end up with a tire
close to the diameter you are looking for. One other option would be a
larger diameter rim, but that will cost big money for rim and also tire.
if you can find a tire with 80 aspect ratio, 295 and 305 width would be
close, and if you can find 85 aspect ratio, 285 width would be close. I
think these are going to be pretty odd sizes to find, but maybe I'm wrong.
Chris
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
slightly based on rim width and manufacturing variance. The 2 tires you
suggested as spares will be significantly smaller diameter.
To calculate the tire height of metric sized tires, use this formula:
(width*aspect ratio*.000787) + rim diameter = height in inches
This will give you the tire diameter in inches. You're going to need a tire
close to the same width, or a higher aspect ratio to end up with a tire
close to the diameter you are looking for. One other option would be a
larger diameter rim, but that will cost big money for rim and also tire.
if you can find a tire with 80 aspect ratio, 295 and 305 width would be
close, and if you can find 85 aspect ratio, 285 width would be close. I
think these are going to be pretty odd sizes to find, but maybe I'm wrong.
Chris
"Boris" <borysd@verizon.net> wrote in message
news:%q%Hg.14213$NF3.243@trnddc05...
> If I get a 225/75/16 or 205/75/16 will this be the same height as my
> 315/75/16? and what rim width will I need for this tire as a spare? or am
> I way off base.
> Thanks
> Boris
>
> "Boris" <borysd@verizon.net> wrote in message
> news:vrKHg.87$N84.62@trnddc08...
>> Thank you for the replies so far....I`m going to get one of those 48"
>> Farmers Jack`s
>> At this point I just want a spare tire... as long it is the same height
>> as the other 3 tires I don`t care if it is skinnier. I`m only going to
>> drive 10 miles or so until I get the original 35" tire fixed. I`m looking
>> for a $50 steel rim and a $100 tire. I`m probably not the sharpest crayon
>> in the box when it comes to tires+rim sizes..... could someone suggest a
>> rim and a tire....please.
>> Thanks
>> Boris
>> http://public.fotki.com/borysd/
>>
>>
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:44EE26F2.4C1A92F1@sympatico.ca...
>>> Most rims have the size stamped into the back side.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>> Matt Macchiarolo wrote:
>>>>
>>>> An 8-10" rim should work. Couldn't you just remove a wheel and measure
>>>> the
>>>> rim width? it's possible to do without removing the tire, if you want
>>>> the
>>>> spare to match.
>>>>
>>>> "Boris" <borysd@verizon.net> wrote in message
>>>> news:BIgHg.24142$u1.16868@trnddc05...
>>>> >I just bought a `88 Wrangler with 315/75/16 tires. I don`t have a
>>>> >spare
>>>> >tire so I need a spare. I know that I need a 16" rim, 5 bolt 4.5" but
>>>> >what
>>>> >rim width do I need for a 315/75/16 tire?
>>>> > Thanks
>>>> > Boris
>>>> >
>>
>>
>
>
