Preformed Brake lines
#2
Guest
Posts: n/a
Re: Preformed Brake lines
Like the steel portion of them? Easy enough to make on your own. The
cheap bending tools may help for some of the sharp bends, but often a spray
paint can, or screw driver handle works better to get the bends you need.
Don't be afraid to just make what you need.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
cheap bending tools may help for some of the sharp bends, but often a spray
paint can, or screw driver handle works better to get the bends you need.
Don't be afraid to just make what you need.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
#3
Guest
Posts: n/a
Re: Preformed Brake lines
Like the steel portion of them? Easy enough to make on your own. The
cheap bending tools may help for some of the sharp bends, but often a spray
paint can, or screw driver handle works better to get the bends you need.
Don't be afraid to just make what you need.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
cheap bending tools may help for some of the sharp bends, but often a spray
paint can, or screw driver handle works better to get the bends you need.
Don't be afraid to just make what you need.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
#4
Guest
Posts: n/a
Re: Preformed Brake lines
Like the steel portion of them? Easy enough to make on your own. The
cheap bending tools may help for some of the sharp bends, but often a spray
paint can, or screw driver handle works better to get the bends you need.
Don't be afraid to just make what you need.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
cheap bending tools may help for some of the sharp bends, but often a spray
paint can, or screw driver handle works better to get the bends you need.
Don't be afraid to just make what you need.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
#5
Guest
Posts: n/a
Re: Preformed Brake lines
Hi Dennis,
Pre formed are too expensive to ship and store for low volume sales.
use a tube bender, they look like a spring that holds the sides from
kinking: http://www.----------.com/tubebender.jpg And flaring tool:
http://www.rothenberger-tool-uk-sale...les/R26050.jpg
If you don't like the length they're sold in.
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
Pre formed are too expensive to ship and store for low volume sales.
use a tube bender, they look like a spring that holds the sides from
kinking: http://www.----------.com/tubebender.jpg And flaring tool:
http://www.rothenberger-tool-uk-sale...les/R26050.jpg
If you don't like the length they're sold in.
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
#6
Guest
Posts: n/a
Re: Preformed Brake lines
Hi Dennis,
Pre formed are too expensive to ship and store for low volume sales.
use a tube bender, they look like a spring that holds the sides from
kinking: http://www.----------.com/tubebender.jpg And flaring tool:
http://www.rothenberger-tool-uk-sale...les/R26050.jpg
If you don't like the length they're sold in.
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
Pre formed are too expensive to ship and store for low volume sales.
use a tube bender, they look like a spring that holds the sides from
kinking: http://www.----------.com/tubebender.jpg And flaring tool:
http://www.rothenberger-tool-uk-sale...les/R26050.jpg
If you don't like the length they're sold in.
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
#7
Guest
Posts: n/a
Re: Preformed Brake lines
Hi Dennis,
Pre formed are too expensive to ship and store for low volume sales.
use a tube bender, they look like a spring that holds the sides from
kinking: http://www.----------.com/tubebender.jpg And flaring tool:
http://www.rothenberger-tool-uk-sale...les/R26050.jpg
If you don't like the length they're sold in.
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
Pre formed are too expensive to ship and store for low volume sales.
use a tube bender, they look like a spring that holds the sides from
kinking: http://www.----------.com/tubebender.jpg And flaring tool:
http://www.rothenberger-tool-uk-sale...les/R26050.jpg
If you don't like the length they're sold in.
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
#8
Guest
Posts: n/a
Re: Preformed Brake lines
Hi Dennis,
I used a bender and flaring tool to make my transmission lines. The kind of
bender that I used was a little different than the spring version that
Bill's link will show you. It has 3 spaces on it for 3 different tubing
sizes and two handles, one for the vice and one for your hand. Actually it
was hinged. It worked really well. I just hand to coat the tubing with
neverseize to keep the tubing sliding in the bender handle. I dont know If
I'd do the brake lines though, I guess I dont see any reason why not. If
you have the time, it would be cheaper than the route that I took. I
purchased preformed stainless steel brake lines on my jeep CJ. Yea, they
were a bit pricey but I know that I'll never have them rust out on me.
Chip
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
I used a bender and flaring tool to make my transmission lines. The kind of
bender that I used was a little different than the spring version that
Bill's link will show you. It has 3 spaces on it for 3 different tubing
sizes and two handles, one for the vice and one for your hand. Actually it
was hinged. It worked really well. I just hand to coat the tubing with
neverseize to keep the tubing sliding in the bender handle. I dont know If
I'd do the brake lines though, I guess I dont see any reason why not. If
you have the time, it would be cheaper than the route that I took. I
purchased preformed stainless steel brake lines on my jeep CJ. Yea, they
were a bit pricey but I know that I'll never have them rust out on me.
Chip
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
#9
Guest
Posts: n/a
Re: Preformed Brake lines
Hi Dennis,
I used a bender and flaring tool to make my transmission lines. The kind of
bender that I used was a little different than the spring version that
Bill's link will show you. It has 3 spaces on it for 3 different tubing
sizes and two handles, one for the vice and one for your hand. Actually it
was hinged. It worked really well. I just hand to coat the tubing with
neverseize to keep the tubing sliding in the bender handle. I dont know If
I'd do the brake lines though, I guess I dont see any reason why not. If
you have the time, it would be cheaper than the route that I took. I
purchased preformed stainless steel brake lines on my jeep CJ. Yea, they
were a bit pricey but I know that I'll never have them rust out on me.
Chip
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
I used a bender and flaring tool to make my transmission lines. The kind of
bender that I used was a little different than the spring version that
Bill's link will show you. It has 3 spaces on it for 3 different tubing
sizes and two handles, one for the vice and one for your hand. Actually it
was hinged. It worked really well. I just hand to coat the tubing with
neverseize to keep the tubing sliding in the bender handle. I dont know If
I'd do the brake lines though, I guess I dont see any reason why not. If
you have the time, it would be cheaper than the route that I took. I
purchased preformed stainless steel brake lines on my jeep CJ. Yea, they
were a bit pricey but I know that I'll never have them rust out on me.
Chip
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
#10
Guest
Posts: n/a
Re: Preformed Brake lines
Hi Dennis,
I used a bender and flaring tool to make my transmission lines. The kind of
bender that I used was a little different than the spring version that
Bill's link will show you. It has 3 spaces on it for 3 different tubing
sizes and two handles, one for the vice and one for your hand. Actually it
was hinged. It worked really well. I just hand to coat the tubing with
neverseize to keep the tubing sliding in the bender handle. I dont know If
I'd do the brake lines though, I guess I dont see any reason why not. If
you have the time, it would be cheaper than the route that I took. I
purchased preformed stainless steel brake lines on my jeep CJ. Yea, they
were a bit pricey but I know that I'll never have them rust out on me.
Chip
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>
I used a bender and flaring tool to make my transmission lines. The kind of
bender that I used was a little different than the spring version that
Bill's link will show you. It has 3 spaces on it for 3 different tubing
sizes and two handles, one for the vice and one for your hand. Actually it
was hinged. It worked really well. I just hand to coat the tubing with
neverseize to keep the tubing sliding in the bender handle. I dont know If
I'd do the brake lines though, I guess I dont see any reason why not. If
you have the time, it would be cheaper than the route that I took. I
purchased preformed stainless steel brake lines on my jeep CJ. Yea, they
were a bit pricey but I know that I'll never have them rust out on me.
Chip
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:l96dncD3ldxaw3fenZ2dnUVZ_tqdnZ2d@comcast.com. ..
> Does anyone know where to get preformed brake lines for a 93 Wrangler?
> Thanks. Dennis
>