Position of window crank when window is up?
08-10-2006, 04:56 PM
#1
Guest
Posts: n/a
Position of window crank when window is up?
Folks,
Does anyone know the position of the window crank (handle) when the
window is fully rolled up? I have a Jeep TJ and disassembled both
inside door panels. I didn't note the crank position on the shaft.
Any insight appreciated.
Thanks,
Nick
Does anyone know the position of the window crank (handle) when the
window is fully rolled up? I have a Jeep TJ and disassembled both
inside door panels. I didn't note the crank position on the shaft.
Any insight appreciated.
Thanks,
Nick
08-10-2006, 04:59 PM
#2
Guest
Posts: n/a
Re: Position of window crank when window is up?
A generic answer would be out of the way of your leg/knee but I don't know
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
08-10-2006, 04:59 PM
#3
Guest
Posts: n/a
Re: Position of window crank when window is up?
A generic answer would be out of the way of your leg/knee but I don't know
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
08-10-2006, 04:59 PM
#4
Guest
Posts: n/a
Re: Position of window crank when window is up?
A generic answer would be out of the way of your leg/knee but I don't know
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
08-10-2006, 04:59 PM
#5
Guest
Posts: n/a
Re: Position of window crank when window is up?
A generic answer would be out of the way of your leg/knee but I don't know
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
how it was originally.
JoBo
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
08-10-2006, 05:23 PM
#6
Guest
Posts: n/a
Re: Position of window crank when window is up?
I have actually moved some to get them out of the way of my knee. I
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
08-10-2006, 05:23 PM
#7
Guest
Posts: n/a
Re: Position of window crank when window is up?
I have actually moved some to get them out of the way of my knee. I
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
08-10-2006, 05:23 PM
#8
Guest
Posts: n/a
Re: Position of window crank when window is up?
I have actually moved some to get them out of the way of my knee. I
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
08-10-2006, 05:23 PM
#9
Guest
Posts: n/a
Re: Position of window crank when window is up?
I have actually moved some to get them out of the way of my knee. I
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
would recommend the handle at 11:00 vs 1:00 because bumps in the road
will walk the window down if the handle is before TDC on a close
rotation. If after TDC, bumps want to wind it up.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Nick ------ wrote:
>
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
08-10-2006, 07:51 PM
#10
Guest
Posts: n/a
Re: Position of window crank when window is up?
Wherever you want ...
I'd select a location that did not interfer with where I like my knee to
rest.
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
I'd select a location that did not interfer with where I like my knee to
rest.
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> Folks,
>
> Does anyone know the position of the window crank (handle) when the
> window is fully rolled up? I have a Jeep TJ and disassembled both
> inside door panels. I didn't note the crank position on the shaft.
>
> Any insight appreciated.
>
> Thanks,
> Nick
>
