Mike Romain wrote:
> Does the key, on, off, on, off, on to read the codes on the dash not work
> on yours?

I didn't know I could do that. I just tried it and I don't see any codes or
blinking lights. Where is the code displayed? Where do I find out what it
means?

Steve Smith

 

If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.

There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.

Mike

Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith

 

If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.

There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.

Mike

Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith

 

If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.

There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.

Mike

Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith

 

If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.

There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.

Mike

Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith

 

Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.

I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.

Steve Smith

 

Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.

I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.

Steve Smith

 

Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.

I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.

Steve Smith

 

Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.

I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.

Steve Smith

 

Cool, cheap books like the Haynes and Chiltons manuals have the lists of
codes and what they mean or you could ask, someone knows likely.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Steve Smith wrote:
>
> Mike Romain wrote:
> > If it works the dash light should flash a set of flashes and pauses
> > ending with 5 5 which means end of codes.
>
> I just tried again and it does work. I just needed to leave the switch on
> and wait a few seconds.
>
> Steve Smith