Please recommend a code scanner
04-04-2005, 12:47 PM
#11
Guest
Posts: n/a
Re: Please recommend a code scanner
Mike Romain wrote:
> Does the key, on, off, on, off, on to read the codes on the dash not work
> on yours?
I didn't know I could do that. I just tried it and I don't see any codes or
blinking lights. Where is the code displayed? Where do I find out what it
means?
Steve Smith
> Does the key, on, off, on, off, on to read the codes on the dash not work
> on yours?
I didn't know I could do that. I just tried it and I don't see any codes or
blinking lights. Where is the code displayed? Where do I find out what it
means?
Steve Smith
04-04-2005, 01:12 PM
#12
Guest
Posts: n/a
Re: Please recommend a code scanner
If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
04-04-2005, 01:12 PM
#13
Guest
Posts: n/a
Re: Please recommend a code scanner
If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
04-04-2005, 01:12 PM
#14
Guest
Posts: n/a
Re: Please recommend a code scanner
If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
04-04-2005, 01:12 PM
#15
Guest
Posts: n/a
Re: Please recommend a code scanner
If it works the dash light should flash a set of flashes and pauses
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
ending with 5 5 which means end of codes.
There are lists of what the codes mean for different vehicles. I
thought the mid 90's stuff could use the key check, too bad.
Mike
Steve Smith wrote:
>
> Mike Romain wrote:
> > Does the key, on, off, on, off, on to read the codes on the dash not work
> > on yours?
>
> I didn't know I could do that. I just tried it and I don't see any codes or
> blinking lights. Where is the code displayed? Where do I find out what it
> means?
>
> Steve Smith
04-04-2005, 02:43 PM
#16
Guest
Posts: n/a
Re: Please recommend a code scanner
Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
04-04-2005, 02:43 PM
#17
Guest
Posts: n/a
Re: Please recommend a code scanner
Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
04-04-2005, 02:43 PM
#18
Guest
Posts: n/a
Re: Please recommend a code scanner
Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
04-04-2005, 02:43 PM
#19
Guest
Posts: n/a
Re: Please recommend a code scanner
Mike Romain wrote:
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
> If it works the dash light should flash a set of flashes and pauses
> ending with 5 5 which means end of codes.
I just tried again and it does work. I just needed to leave the switch on
and wait a few seconds.
Steve Smith
04-04-2005, 03:03 PM
#20
Guest
Posts: n/a
Re: Please recommend a code scanner
Cool, cheap books like the Haynes and Chiltons manuals have the lists of
codes and what they mean or you could ask, someone knows likely.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Smith wrote:
>
> Mike Romain wrote:
> > If it works the dash light should flash a set of flashes and pauses
> > ending with 5 5 which means end of codes.
>
> I just tried again and it does work. I just needed to leave the switch on
> and wait a few seconds.
>
> Steve Smith
codes and what they mean or you could ask, someone knows likely.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Steve Smith wrote:
>
> Mike Romain wrote:
> > If it works the dash light should flash a set of flashes and pauses
> > ending with 5 5 which means end of codes.
>
> I just tried again and it does work. I just needed to leave the switch on
> and wait a few seconds.
>
> Steve Smith