Pinion Seals
04-26-2005 | 07:20 PM
#22
Guest
Posts: n/a
Re: Pinion Seals
Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
04-26-2005 | 07:20 PM
#23
Guest
Posts: n/a
Re: Pinion Seals
Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
04-26-2005 | 07:20 PM
#24
Guest
Posts: n/a
Re: Pinion Seals
Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
04-26-2005 | 07:20 PM
#25
Guest
Posts: n/a
Re: Pinion Seals
Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
seal is not a pinion seal. That's what confused me.
"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle
04-26-2005 | 07:24 PM
#26
Guest
Posts: n/a
Re: Pinion Seals
As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
04-26-2005 | 07:24 PM
#27
Guest
Posts: n/a
Re: Pinion Seals
As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
04-26-2005 | 07:24 PM
#28
Guest
Posts: n/a
Re: Pinion Seals
As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
04-26-2005 | 07:24 PM
#29
Guest
Posts: n/a
Re: Pinion Seals
As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.
04-26-2005 | 07:54 PM
#30
Guest
Posts: n/a
Re: Pinion Seals
On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:
>Got it. But there is only one Pinion and it lives in the diff, the tcase
>seal is not a pinion seal. That's what confused me.
>
Got it, thought they were both pinion seals. What is tcase seal
called?
<spamcatcher@yahoo.net> wrote:
>Got it. But there is only one Pinion and it lives in the diff, the tcase
>seal is not a pinion seal. That's what confused me.
>
Got it, thought they were both pinion seals. What is tcase seal
called?
