Pinion Seals
#11
Guest
Posts: n/a
Re: Pinion Seals
That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
causing vibration and yes, I see it lots.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
#12
Guest
Posts: n/a
Re: Pinion Seals
That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
causing vibration and yes, I see it lots.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
#13
Guest
Posts: n/a
Re: Pinion Seals
That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
causing vibration and yes, I see it lots.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
#14
Guest
Posts: n/a
Re: Pinion Seals
On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
#15
Guest
Posts: n/a
Re: Pinion Seals
On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
#16
Guest
Posts: n/a
Re: Pinion Seals
On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
#17
Guest
Posts: n/a
Re: Pinion Seals
On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.
wrote:
>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>
Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.