Pics or Call out of Power Steering bracket assembly w/ MPI
#11
Guest
Posts: n/a
Re: Pics or Call out of Power Steering bracket assembly w/ MPI
Thanks guys, Another thing I could do is call jeepsrus to see what they to.
Thanks again,
bill
"serg" <sfon@yahoo.com> wrote in message
news:934d0785.0308261456.14af122e@posting.google.c om...
> same reason why i haven't sent pix either...
>
>
> "Jeff Strickland" <beerman@yahoo.com> wrote in message
news:<vkn69a2s2ma52c@corp.supernews.com>...
> > I would jump in here, but I have a vbelt system, and I don't know that
the
> > brackets are the same or different.
> >
> > My power steering pump gets a bracket on the front and on the back. I'll
> > have to look at it more closely to be sure, but my recollection is that
> > there are two brackets that sandwich the body of the pump. I actually
think
> > that only one of the brackets holds the pump on, the other is itself a
> > bracket that held the air pump for the cold air injectors (part of the
old
> > smog system).
> >
> > I'll take a second look ant my power steering and describe the brackets.
I
> > seem to remember having to put in a couple of washers, and I seem to
> > remember there was a spacer of about an inch or inch and a half that was
> > needed too.
> >
> >
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:biet1f$8fm3m$1@ID-193866.news.uni-berlin.de...
> > > Hey thanks Serg. Yes, I have this guy's page along with another and a
> > host
> > > of pics downloaded to my pc. I just don't have a good pic of the
finished
> > > bracket assembly of the power steering pump on a serp belt. I basicly
> > have
> > > been told just to make it work.
> > >
> > > No prob. I'll work it out.
> > >
> > > Thanks for the reply.
> > >
> > > bill
> > >
> > >
> > > "serg" <none@none.com> wrote in message
> > > news:w2C2b.7198$J%4.238@newssvr25.news.prodigy.com ...
> > > > bill-don't know if you've seen this site. this guy's pretty cool
and
> > his
> > > > projects page simply rocks! good luck!
> > > >
> > > > http://www.sierrajeep.com/moparmpi.htm
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:bibn3v$7fhd4$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > > I made some pics with my crappy digital camera so here goes:
> > > > >
> > > > > This one shows the back bracket (attached to the engine with 2
bolts
> > at
> > the
> > > > > bottom). I had to add a couple of washers between the bracket and
the
> > > > > engine to push it out. Otherwise the bracket hole didn't line up
with
> > the
> > > > > bolt hole on the intake manifold.
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets1.jpg
> > > > >
> > > > > I re-evaluated the intake manifold and see that is seated
perfectly
> > along
> > > > > with the exhaust manifold.
> > > > > I'm sure it's centered correctly because I left the two center
bolt
> > holes
> > > > > alone when grinding out the others to make it fit.
> > > > >
> > > > > This is a frontal view where you can see the left side of the
diamond
> > > > > bracket doesn't line up with the hole at the water pump and the
other
> > > > > bracket which is attached to the head bolts on top.
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets3.jpg
> > > > >
> > > > >
> > > > > These are other versions of #1
> > > > >
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets2.jpg
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets4.jpg
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets5.jpg
> > > > >
> > > > >
> > > > > Thanks for any comments, suggestions.
> > > > >
> > > > > bill
> > > > >
> > > > >
> > > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > > news:bibhrh$7hdl6$1@ID-193866.news.uni-berlin.de...
> > > > > > Hi all,
> > > > > >
> > > > > > I need pics or a call-out of the power steering bracket
assembly
> > for
> > a
> > > > > > Serp Belt on a 258. Can any one take a pic or several pics of
> > theirs
> > at
> > > > > > different angles and send it to me? Or point to some on the
web.
> > Or
> > send
> > > > > > me or point me to a call-out of that area.
> > > > > >
> > > > > > Mine doesn't seem to be going together as I "think" it should.
> > > > > >
> > > > > > thanks,
> > > > > >
> > > > > > Bill
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
Thanks again,
bill
"serg" <sfon@yahoo.com> wrote in message
news:934d0785.0308261456.14af122e@posting.google.c om...
> same reason why i haven't sent pix either...
>
>
> "Jeff Strickland" <beerman@yahoo.com> wrote in message
news:<vkn69a2s2ma52c@corp.supernews.com>...
> > I would jump in here, but I have a vbelt system, and I don't know that
the
> > brackets are the same or different.
> >
> > My power steering pump gets a bracket on the front and on the back. I'll
> > have to look at it more closely to be sure, but my recollection is that
> > there are two brackets that sandwich the body of the pump. I actually
think
> > that only one of the brackets holds the pump on, the other is itself a
> > bracket that held the air pump for the cold air injectors (part of the
old
> > smog system).
> >
> > I'll take a second look ant my power steering and describe the brackets.
I
> > seem to remember having to put in a couple of washers, and I seem to
> > remember there was a spacer of about an inch or inch and a half that was
> > needed too.
> >
> >
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:biet1f$8fm3m$1@ID-193866.news.uni-berlin.de...
> > > Hey thanks Serg. Yes, I have this guy's page along with another and a
> > host
> > > of pics downloaded to my pc. I just don't have a good pic of the
finished
> > > bracket assembly of the power steering pump on a serp belt. I basicly
> > have
> > > been told just to make it work.
> > >
> > > No prob. I'll work it out.
> > >
> > > Thanks for the reply.
> > >
> > > bill
> > >
> > >
> > > "serg" <none@none.com> wrote in message
> > > news:w2C2b.7198$J%4.238@newssvr25.news.prodigy.com ...
> > > > bill-don't know if you've seen this site. this guy's pretty cool
and
> > his
> > > > projects page simply rocks! good luck!
> > > >
> > > > http://www.sierrajeep.com/moparmpi.htm
> > > >
> > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > news:bibn3v$7fhd4$1@ID-193866.news.uni-berlin.de...
> > > > > Hi all,
> > > > > I made some pics with my crappy digital camera so here goes:
> > > > >
> > > > > This one shows the back bracket (attached to the engine with 2
bolts
> > at
> > the
> > > > > bottom). I had to add a couple of washers between the bracket and
the
> > > > > engine to push it out. Otherwise the bracket hole didn't line up
with
> > the
> > > > > bolt hole on the intake manifold.
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets1.jpg
> > > > >
> > > > > I re-evaluated the intake manifold and see that is seated
perfectly
> > along
> > > > > with the exhaust manifold.
> > > > > I'm sure it's centered correctly because I left the two center
bolt
> > holes
> > > > > alone when grinding out the others to make it fit.
> > > > >
> > > > > This is a frontal view where you can see the left side of the
diamond
> > > > > bracket doesn't line up with the hole at the water pump and the
other
> > > > > bracket which is attached to the head bolts on top.
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets3.jpg
> > > > >
> > > > >
> > > > > These are other versions of #1
> > > > >
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets2.jpg
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets4.jpg
> > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets5.jpg
> > > > >
> > > > >
> > > > > Thanks for any comments, suggestions.
> > > > >
> > > > > bill
> > > > >
> > > > >
> > > > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > > > news:bibhrh$7hdl6$1@ID-193866.news.uni-berlin.de...
> > > > > > Hi all,
> > > > > >
> > > > > > I need pics or a call-out of the power steering bracket
assembly
> > for
> > a
> > > > > > Serp Belt on a 258. Can any one take a pic or several pics of
> > theirs
> > at
> > > > > > different angles and send it to me? Or point to some on the
web.
> > Or
> > send
> > > > > > me or point me to a call-out of that area.
> > > > > >
> > > > > > Mine doesn't seem to be going together as I "think" it should.
> > > > > >
> > > > > > thanks,
> > > > > >
> > > > > > Bill
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
General Jeep and Tech Talk.
0
02-01-2013 03:59 PM
mechano
Jeep & 4x4 Items Wanted
1
07-25-2011 08:36 PM
William Oliveri
Jeep Mailing List
2
09-03-2003 12:42 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)