PCV Valve MPI kit
#1
Guest
Posts: n/a
PCV Valve MPI kit
Hi all,
I need to get parts for the two holes which are on top of the valve cover
for my MPI kit upgrade. First the hole towards the front of the engine, has
a label of Fresh Air Inlet and goes to the air filter from what I can see on
my instructions. Second is the one to the back of the engine, has a label
of CCV Hose, has a MAP sensor connection, and looks like it goes to the
intake manifold.
Question:
What do I order for the front? That is, since this is built on a 94 YJ what
should I get from the valve cover to the air cleaner? What are these parts
called.
Same for the rear one.
Thanks in advance,
Bill
I need to get parts for the two holes which are on top of the valve cover
for my MPI kit upgrade. First the hole towards the front of the engine, has
a label of Fresh Air Inlet and goes to the air filter from what I can see on
my instructions. Second is the one to the back of the engine, has a label
of CCV Hose, has a MAP sensor connection, and looks like it goes to the
intake manifold.
Question:
What do I order for the front? That is, since this is built on a 94 YJ what
should I get from the valve cover to the air cleaner? What are these parts
called.
Same for the rear one.
Thanks in advance,
Bill
#2
Guest
Posts: n/a
Re: PCV Valve MPI kit
My Kit came with the parts you are asking about. One of them is simply an
elbow, the other is (in my case) an orifice. An orifice is a small hole ...
The elbow goes in the front hole, the orifice goes in the back hole.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
elbow, the other is (in my case) an orifice. An orifice is a small hole ...
The elbow goes in the front hole, the orifice goes in the back hole.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
#3
Guest
Posts: n/a
Re: PCV Valve MPI kit
My Kit came with the parts you are asking about. One of them is simply an
elbow, the other is (in my case) an orifice. An orifice is a small hole ...
The elbow goes in the front hole, the orifice goes in the back hole.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
elbow, the other is (in my case) an orifice. An orifice is a small hole ...
The elbow goes in the front hole, the orifice goes in the back hole.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
#4
Guest
Posts: n/a
Re: PCV Valve MPI kit
bill-the part #'s for the fittings are
Valve Cover fitting (gray) 53030497
Valve Cover fitting (black) 53030495
try hesco. they might stock it
http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
not sure if you have this...instructions and parts list
http://www.ifsja.org/tech/motors/mpi.shtml
here's what mine look like-
http://f1.pg.photos.yahoo.com/sfon
good luck!
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
Valve Cover fitting (gray) 53030497
Valve Cover fitting (black) 53030495
try hesco. they might stock it
http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
not sure if you have this...instructions and parts list
http://www.ifsja.org/tech/motors/mpi.shtml
here's what mine look like-
http://f1.pg.photos.yahoo.com/sfon
good luck!
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
#5
Guest
Posts: n/a
Re: PCV Valve MPI kit
bill-the part #'s for the fittings are
Valve Cover fitting (gray) 53030497
Valve Cover fitting (black) 53030495
try hesco. they might stock it
http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
not sure if you have this...instructions and parts list
http://www.ifsja.org/tech/motors/mpi.shtml
here's what mine look like-
http://f1.pg.photos.yahoo.com/sfon
good luck!
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
Valve Cover fitting (gray) 53030497
Valve Cover fitting (black) 53030495
try hesco. they might stock it
http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
not sure if you have this...instructions and parts list
http://www.ifsja.org/tech/motors/mpi.shtml
here's what mine look like-
http://f1.pg.photos.yahoo.com/sfon
good luck!
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> Hi all,
>
> I need to get parts for the two holes which are on top of the valve
cover
> for my MPI kit upgrade. First the hole towards the front of the engine,
has
> a label of Fresh Air Inlet and goes to the air filter from what I can see
on
> my instructions. Second is the one to the back of the engine, has a label
> of CCV Hose, has a MAP sensor connection, and looks like it goes to the
> intake manifold.
>
> Question:
>
> What do I order for the front? That is, since this is built on a 94 YJ
what
> should I get from the valve cover to the air cleaner? What are these
parts
> called.
> Same for the rear one.
>
>
> Thanks in advance,
>
> Bill
>
>
>
#6
Guest
Posts: n/a
Re: PCV Valve MPI kit
bill-the part #'s for those are
vacuum tubing 53030728 (goes to back of valve cover and to map sensor)
vaccum tubing 53006237 (front of cover to air cleaner)
check my photo page for some more pix. i did a mock-up of the parts and how
i think they go together....
the MAP sensor has to plugs-one electrical (3 prong) and one vacuum. the
vacuum conector goes to the intake manifold. see pix
the manifold i have only has a fuel inlet. the other part in the photo page
is the fuel pressure regulator. it gets mounted next to the fuel pump and
the return goes into the middle outlet. just a different design.
no problem!
http://f1.pg.photos.yahoo.com/sfon
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjqdi6$m82uc$2@ID-193866.news.uni-berlin.de...
> Thanks Serg,
>
> Do you also have the connecting parts? That is, the hose which goes to
> the air filter assembly for the front and the connecting hose and
electrical
> connector attached to that (sorry, I don't know the names of these
things).
>
> Also, the digital references look great. I see you have a different
looking
> intake manifold than I do.
>
> Thanks,
>
> Bill
>
>
>
>
> "serg" <none@none.com> wrote in message
> news:9G28b.1367$jX4.174@newssvr29.news.prodigy.com ...
> > bill-the part #'s for the fittings are
> > Valve Cover fitting (gray) 53030497
> > Valve Cover fitting (black) 53030495
> >
> > try hesco. they might stock it
> > http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
> >
> > not sure if you have this...instructions and parts list
> > http://www.ifsja.org/tech/motors/mpi.shtml
> >
> > here's what mine look like-
> > http://f1.pg.photos.yahoo.com/sfon
> >
> > good luck!
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > I need to get parts for the two holes which are on top of the valve
> > cover
> > > for my MPI kit upgrade. First the hole towards the front of the
engine,
> > has
> > > a label of Fresh Air Inlet and goes to the air filter from what I can
> see
> > on
> > > my instructions. Second is the one to the back of the engine, has a
> label
> > > of CCV Hose, has a MAP sensor connection, and looks like it goes to
the
> > > intake manifold.
> > >
> > > Question:
> > >
> > > What do I order for the front? That is, since this is built on a 94
YJ
> > what
> > > should I get from the valve cover to the air cleaner? What are these
> > parts
> > > called.
> > > Same for the rear one.
> > >
> > >
> > > Thanks in advance,
> > >
> > > Bill
> > >
> > >
> > >
> >
> >
>
>
>
>
vacuum tubing 53030728 (goes to back of valve cover and to map sensor)
vaccum tubing 53006237 (front of cover to air cleaner)
check my photo page for some more pix. i did a mock-up of the parts and how
i think they go together....
the MAP sensor has to plugs-one electrical (3 prong) and one vacuum. the
vacuum conector goes to the intake manifold. see pix
the manifold i have only has a fuel inlet. the other part in the photo page
is the fuel pressure regulator. it gets mounted next to the fuel pump and
the return goes into the middle outlet. just a different design.
no problem!
http://f1.pg.photos.yahoo.com/sfon
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjqdi6$m82uc$2@ID-193866.news.uni-berlin.de...
> Thanks Serg,
>
> Do you also have the connecting parts? That is, the hose which goes to
> the air filter assembly for the front and the connecting hose and
electrical
> connector attached to that (sorry, I don't know the names of these
things).
>
> Also, the digital references look great. I see you have a different
looking
> intake manifold than I do.
>
> Thanks,
>
> Bill
>
>
>
>
> "serg" <none@none.com> wrote in message
> news:9G28b.1367$jX4.174@newssvr29.news.prodigy.com ...
> > bill-the part #'s for the fittings are
> > Valve Cover fitting (gray) 53030497
> > Valve Cover fitting (black) 53030495
> >
> > try hesco. they might stock it
> > http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
> >
> > not sure if you have this...instructions and parts list
> > http://www.ifsja.org/tech/motors/mpi.shtml
> >
> > here's what mine look like-
> > http://f1.pg.photos.yahoo.com/sfon
> >
> > good luck!
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > I need to get parts for the two holes which are on top of the valve
> > cover
> > > for my MPI kit upgrade. First the hole towards the front of the
engine,
> > has
> > > a label of Fresh Air Inlet and goes to the air filter from what I can
> see
> > on
> > > my instructions. Second is the one to the back of the engine, has a
> label
> > > of CCV Hose, has a MAP sensor connection, and looks like it goes to
the
> > > intake manifold.
> > >
> > > Question:
> > >
> > > What do I order for the front? That is, since this is built on a 94
YJ
> > what
> > > should I get from the valve cover to the air cleaner? What are these
> > parts
> > > called.
> > > Same for the rear one.
> > >
> > >
> > > Thanks in advance,
> > >
> > > Bill
> > >
> > >
> > >
> >
> >
>
>
>
>
#7
Guest
Posts: n/a
Re: PCV Valve MPI kit
bill-the part #'s for those are
vacuum tubing 53030728 (goes to back of valve cover and to map sensor)
vaccum tubing 53006237 (front of cover to air cleaner)
check my photo page for some more pix. i did a mock-up of the parts and how
i think they go together....
the MAP sensor has to plugs-one electrical (3 prong) and one vacuum. the
vacuum conector goes to the intake manifold. see pix
the manifold i have only has a fuel inlet. the other part in the photo page
is the fuel pressure regulator. it gets mounted next to the fuel pump and
the return goes into the middle outlet. just a different design.
no problem!
http://f1.pg.photos.yahoo.com/sfon
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjqdi6$m82uc$2@ID-193866.news.uni-berlin.de...
> Thanks Serg,
>
> Do you also have the connecting parts? That is, the hose which goes to
> the air filter assembly for the front and the connecting hose and
electrical
> connector attached to that (sorry, I don't know the names of these
things).
>
> Also, the digital references look great. I see you have a different
looking
> intake manifold than I do.
>
> Thanks,
>
> Bill
>
>
>
>
> "serg" <none@none.com> wrote in message
> news:9G28b.1367$jX4.174@newssvr29.news.prodigy.com ...
> > bill-the part #'s for the fittings are
> > Valve Cover fitting (gray) 53030497
> > Valve Cover fitting (black) 53030495
> >
> > try hesco. they might stock it
> > http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
> >
> > not sure if you have this...instructions and parts list
> > http://www.ifsja.org/tech/motors/mpi.shtml
> >
> > here's what mine look like-
> > http://f1.pg.photos.yahoo.com/sfon
> >
> > good luck!
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > I need to get parts for the two holes which are on top of the valve
> > cover
> > > for my MPI kit upgrade. First the hole towards the front of the
engine,
> > has
> > > a label of Fresh Air Inlet and goes to the air filter from what I can
> see
> > on
> > > my instructions. Second is the one to the back of the engine, has a
> label
> > > of CCV Hose, has a MAP sensor connection, and looks like it goes to
the
> > > intake manifold.
> > >
> > > Question:
> > >
> > > What do I order for the front? That is, since this is built on a 94
YJ
> > what
> > > should I get from the valve cover to the air cleaner? What are these
> > parts
> > > called.
> > > Same for the rear one.
> > >
> > >
> > > Thanks in advance,
> > >
> > > Bill
> > >
> > >
> > >
> >
> >
>
>
>
>
vacuum tubing 53030728 (goes to back of valve cover and to map sensor)
vaccum tubing 53006237 (front of cover to air cleaner)
check my photo page for some more pix. i did a mock-up of the parts and how
i think they go together....
the MAP sensor has to plugs-one electrical (3 prong) and one vacuum. the
vacuum conector goes to the intake manifold. see pix
the manifold i have only has a fuel inlet. the other part in the photo page
is the fuel pressure regulator. it gets mounted next to the fuel pump and
the return goes into the middle outlet. just a different design.
no problem!
http://f1.pg.photos.yahoo.com/sfon
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bjqdi6$m82uc$2@ID-193866.news.uni-berlin.de...
> Thanks Serg,
>
> Do you also have the connecting parts? That is, the hose which goes to
> the air filter assembly for the front and the connecting hose and
electrical
> connector attached to that (sorry, I don't know the names of these
things).
>
> Also, the digital references look great. I see you have a different
looking
> intake manifold than I do.
>
> Thanks,
>
> Bill
>
>
>
>
> "serg" <none@none.com> wrote in message
> news:9G28b.1367$jX4.174@newssvr29.news.prodigy.com ...
> > bill-the part #'s for the fittings are
> > Valve Cover fitting (gray) 53030497
> > Valve Cover fitting (black) 53030495
> >
> > try hesco. they might stock it
> > http://www.hescosc.com/cgi-bin/ez-ca....cgi?12X364946
> >
> > not sure if you have this...instructions and parts list
> > http://www.ifsja.org/tech/motors/mpi.shtml
> >
> > here's what mine look like-
> > http://f1.pg.photos.yahoo.com/sfon
> >
> > good luck!
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bjp1tm$lh5ma$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > >
> > > I need to get parts for the two holes which are on top of the valve
> > cover
> > > for my MPI kit upgrade. First the hole towards the front of the
engine,
> > has
> > > a label of Fresh Air Inlet and goes to the air filter from what I can
> see
> > on
> > > my instructions. Second is the one to the back of the engine, has a
> label
> > > of CCV Hose, has a MAP sensor connection, and looks like it goes to
the
> > > intake manifold.
> > >
> > > Question:
> > >
> > > What do I order for the front? That is, since this is built on a 94
YJ
> > what
> > > should I get from the valve cover to the air cleaner? What are these
> > parts
> > > called.
> > > Same for the rear one.
> > >
> > >
> > > Thanks in advance,
> > >
> > > Bill
> > >
> > >
> > >
> >
> >
>
>
>
>
#8
Guest
Posts: n/a
Re: PCV Valve MPI kit
You already have the original return line on the driver's side rail, you
could use it for the feed line, but I think it is smaller by a 1/16th, so
maybe not.
That is an interesting regulator. My fuel regulator needs vacuum to open and
close, but this regulator seems to work directly from the fuel demand, that
is it provides X amount of pressure on the rail, and whent he rail demands
more fuel, the regulator simply opens more to meet the demand.
"serg" <sfon@NOSPAMyahoo.NOSPAMcom> wrote in message
news:5x48b.3374$Sw6.2750@newssvr25.news.prodigy.co m...
> you got it! it's the new fuel pressure regulator-it goes mounted right
after
> the fuel pump next to the fuel tank. the middle outlet connects to the
fuel
> return. the upper one (with red plug) goes to the fuel rail and the
bottom
> to the high pressure side of the pump. i guess i'll be running the fuel
> line along the driver side frame rail too. check the photo page for a pic
> of how is goes mounted.
>
> "Jeff Strickland" <beerman@yahoo.com> wrote in message
> news:vm1javs9i5v116@corp.supernews.com...
> >
> > > here's what mine look like-
> > > http://f1.pg.photos.yahoo.com/sfon
> > >
> > > good luck!
> > >
> >
> >
> > What is pic # P9080021 showing us? I am guessing it is the fuel pressure
> > regulator. On my MPFI kit, my fuel rail is different than your's, mine
has
> > two fuel lines, one is the supply line and the other is the return.
> >
> > In pic #P9110003, the black one goes on the front hole and connects to
the
> > intake, the gray one goes in the back hole and connects to the canister
> (?)
> > (I forget where it went, but I think it was the canister.)
> >
> >
> >
>
>
could use it for the feed line, but I think it is smaller by a 1/16th, so
maybe not.
That is an interesting regulator. My fuel regulator needs vacuum to open and
close, but this regulator seems to work directly from the fuel demand, that
is it provides X amount of pressure on the rail, and whent he rail demands
more fuel, the regulator simply opens more to meet the demand.
"serg" <sfon@NOSPAMyahoo.NOSPAMcom> wrote in message
news:5x48b.3374$Sw6.2750@newssvr25.news.prodigy.co m...
> you got it! it's the new fuel pressure regulator-it goes mounted right
after
> the fuel pump next to the fuel tank. the middle outlet connects to the
fuel
> return. the upper one (with red plug) goes to the fuel rail and the
bottom
> to the high pressure side of the pump. i guess i'll be running the fuel
> line along the driver side frame rail too. check the photo page for a pic
> of how is goes mounted.
>
> "Jeff Strickland" <beerman@yahoo.com> wrote in message
> news:vm1javs9i5v116@corp.supernews.com...
> >
> > > here's what mine look like-
> > > http://f1.pg.photos.yahoo.com/sfon
> > >
> > > good luck!
> > >
> >
> >
> > What is pic # P9080021 showing us? I am guessing it is the fuel pressure
> > regulator. On my MPFI kit, my fuel rail is different than your's, mine
has
> > two fuel lines, one is the supply line and the other is the return.
> >
> > In pic #P9110003, the black one goes on the front hole and connects to
the
> > intake, the gray one goes in the back hole and connects to the canister
> (?)
> > (I forget where it went, but I think it was the canister.)
> >
> >
> >
>
>
#9
Guest
Posts: n/a
Re: PCV Valve MPI kit
You already have the original return line on the driver's side rail, you
could use it for the feed line, but I think it is smaller by a 1/16th, so
maybe not.
That is an interesting regulator. My fuel regulator needs vacuum to open and
close, but this regulator seems to work directly from the fuel demand, that
is it provides X amount of pressure on the rail, and whent he rail demands
more fuel, the regulator simply opens more to meet the demand.
"serg" <sfon@NOSPAMyahoo.NOSPAMcom> wrote in message
news:5x48b.3374$Sw6.2750@newssvr25.news.prodigy.co m...
> you got it! it's the new fuel pressure regulator-it goes mounted right
after
> the fuel pump next to the fuel tank. the middle outlet connects to the
fuel
> return. the upper one (with red plug) goes to the fuel rail and the
bottom
> to the high pressure side of the pump. i guess i'll be running the fuel
> line along the driver side frame rail too. check the photo page for a pic
> of how is goes mounted.
>
> "Jeff Strickland" <beerman@yahoo.com> wrote in message
> news:vm1javs9i5v116@corp.supernews.com...
> >
> > > here's what mine look like-
> > > http://f1.pg.photos.yahoo.com/sfon
> > >
> > > good luck!
> > >
> >
> >
> > What is pic # P9080021 showing us? I am guessing it is the fuel pressure
> > regulator. On my MPFI kit, my fuel rail is different than your's, mine
has
> > two fuel lines, one is the supply line and the other is the return.
> >
> > In pic #P9110003, the black one goes on the front hole and connects to
the
> > intake, the gray one goes in the back hole and connects to the canister
> (?)
> > (I forget where it went, but I think it was the canister.)
> >
> >
> >
>
>
could use it for the feed line, but I think it is smaller by a 1/16th, so
maybe not.
That is an interesting regulator. My fuel regulator needs vacuum to open and
close, but this regulator seems to work directly from the fuel demand, that
is it provides X amount of pressure on the rail, and whent he rail demands
more fuel, the regulator simply opens more to meet the demand.
"serg" <sfon@NOSPAMyahoo.NOSPAMcom> wrote in message
news:5x48b.3374$Sw6.2750@newssvr25.news.prodigy.co m...
> you got it! it's the new fuel pressure regulator-it goes mounted right
after
> the fuel pump next to the fuel tank. the middle outlet connects to the
fuel
> return. the upper one (with red plug) goes to the fuel rail and the
bottom
> to the high pressure side of the pump. i guess i'll be running the fuel
> line along the driver side frame rail too. check the photo page for a pic
> of how is goes mounted.
>
> "Jeff Strickland" <beerman@yahoo.com> wrote in message
> news:vm1javs9i5v116@corp.supernews.com...
> >
> > > here's what mine look like-
> > > http://f1.pg.photos.yahoo.com/sfon
> > >
> > > good luck!
> > >
> >
> >
> > What is pic # P9080021 showing us? I am guessing it is the fuel pressure
> > regulator. On my MPFI kit, my fuel rail is different than your's, mine
has
> > two fuel lines, one is the supply line and the other is the return.
> >
> > In pic #P9110003, the black one goes on the front hole and connects to
the
> > intake, the gray one goes in the back hole and connects to the canister
> (?)
> > (I forget where it went, but I think it was the canister.)
> >
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
64
04-27-2004 04:46 PM
William Oliveri
Jeep Mailing List
0
09-15-2003 10:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)