OT:Funny
05-12-2004, 12:35 PM
#1
Guest
Posts: n/a
OT:Funny
I don't know how they wrote this with a straight face. This was a real
memo sent out by a computer company (IBM) to its
employees in all seriousness. It went to all field engineers about a
computer peripheral problem. The author of this memo
was quite genuine. The engineers rolled on the floor! Especially note
the last couple of sentences.
Re: Replacement of Mouse *****.
If a mouse fails to operate or should it perform erratically, it may
need a ball replacement. Mouse ***** are now available as
FRU (Field Replacement Units). Because of the delicate nature of this
procedure, replacement of mouse ***** should only be
attempted by properly trained personnel.
Before proceeding, determine the type of mouse ***** by examining the
underside of the mouse
Domestic ***** will be larger and harder than foreign *****. Ball
removal procedures differ depending upon the manufacturer of
the mouse. Foreign ***** can be replaced using the pop off method.
Domestic ***** are replaced by using the twist off method.
Mouse ***** are not usually static sensitive. However, excessive
handling can result in sudden discharge.
Upon completion of ball replacement, the mouse may be used immediately.
It is recommended that each person have a pair of
spare ***** for maintaining optimum customer satisfaction.
Any customer missing his ***** should contact the local personnel in
charge of removing and replacing these necessary items.
Please keep in mind that a customer without properly working ***** is an
unhappy customer.
memo sent out by a computer company (IBM) to its
employees in all seriousness. It went to all field engineers about a
computer peripheral problem. The author of this memo
was quite genuine. The engineers rolled on the floor! Especially note
the last couple of sentences.
Re: Replacement of Mouse *****.
If a mouse fails to operate or should it perform erratically, it may
need a ball replacement. Mouse ***** are now available as
FRU (Field Replacement Units). Because of the delicate nature of this
procedure, replacement of mouse ***** should only be
attempted by properly trained personnel.
Before proceeding, determine the type of mouse ***** by examining the
underside of the mouse
Domestic ***** will be larger and harder than foreign *****. Ball
removal procedures differ depending upon the manufacturer of
the mouse. Foreign ***** can be replaced using the pop off method.
Domestic ***** are replaced by using the twist off method.
Mouse ***** are not usually static sensitive. However, excessive
handling can result in sudden discharge.
Upon completion of ball replacement, the mouse may be used immediately.
It is recommended that each person have a pair of
spare ***** for maintaining optimum customer satisfaction.
Any customer missing his ***** should contact the local personnel in
charge of removing and replacing these necessary items.
Please keep in mind that a customer without properly working ***** is an
unhappy customer.
05-12-2004, 12:58 PM
#2
Guest
Posts: n/a
Re: OT:Funny
My mouse has been gelded: http://www.----------.com/mouse.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
05-12-2004, 12:58 PM
#3
Guest
Posts: n/a
Re: OT:Funny
My mouse has been gelded: http://www.----------.com/mouse.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
05-12-2004, 12:58 PM
#4
Guest
Posts: n/a
Re: OT:Funny
My mouse has been gelded: http://www.----------.com/mouse.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
05-12-2004, 12:58 PM
#5
Guest
Posts: n/a
Re: OT:Funny
My mouse has been gelded: http://www.----------.com/mouse.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
God Bless America, ßill O|||||||O
mailto:--------------------
c wrote:
>
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
05-12-2004, 01:10 PM
#6
Guest
Posts: n/a
Re: OT:Funny
lol!! my mouse is gelded too...what does it mean to have a mouse with no
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
05-12-2004, 01:10 PM
#7
Guest
Posts: n/a
Re: OT:Funny
lol!! my mouse is gelded too...what does it mean to have a mouse with no
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
05-12-2004, 01:10 PM
#8
Guest
Posts: n/a
Re: OT:Funny
lol!! my mouse is gelded too...what does it mean to have a mouse with no
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
05-12-2004, 01:10 PM
#9
Guest
Posts: n/a
Re: OT:Funny
lol!! my mouse is gelded too...what does it mean to have a mouse with no
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
*****?
"c" <c@me.org> wrote in message
news:mnsoc.7639$aB5.7297@twister.rdc-kc.rr.com...
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
05-12-2004, 02:55 PM
#10
Guest
Posts: n/a
Re: OT:Funny
This was a riot in 1990...
c wrote:
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
c wrote:
> I don't know how they wrote this with a straight face. This was a real
> memo sent out by a computer company (IBM) to its
> employees in all seriousness. It went to all field engineers about a
> computer peripheral problem. The author of this memo
> was quite genuine. The engineers rolled on the floor! Especially note
> the last couple of sentences.
>
> Re: Replacement of Mouse *****.
>
> If a mouse fails to operate or should it perform erratically, it may
> need a ball replacement. Mouse ***** are now available as
> FRU (Field Replacement Units). Because of the delicate nature of this
> procedure, replacement of mouse ***** should only be
> attempted by properly trained personnel.
> Before proceeding, determine the type of mouse ***** by examining the
> underside of the mouse
> Domestic ***** will be larger and harder than foreign *****. Ball
> removal procedures differ depending upon the manufacturer of
> the mouse. Foreign ***** can be replaced using the pop off method.
> Domestic ***** are replaced by using the twist off method.
> Mouse ***** are not usually static sensitive. However, excessive
> handling can result in sudden discharge.
>
> Upon completion of ball replacement, the mouse may be used immediately.
> It is recommended that each person have a pair of
> spare ***** for maintaining optimum customer satisfaction.
> Any customer missing his ***** should contact the local personnel in
> charge of removing and replacing these necessary items.
> Please keep in mind that a customer without properly working ***** is an
> unhappy customer.
>
>
