DougW

fletcher did pass the time by typing:
> Keep us posted on what you find. I have been planning on rebuilding my worn
> out 258 as my winter project. Then last night I found a free 258 that is in
> need of a rebuild as well. So now I have the luxury of building one,
> driving the other, then doing an engine swap at my discretion. I am in
> about the same phase you are, looking at $350ish for a rebuild kit,
> performance cam for $150ish, have the engine balanced $150ish, some time
> getting parts machines $200ish. All of those prices are my guesses and from
> about 10 minutes with Google so I really don't know what this will cost. I
> add that up plus things that I forgot and I could easily be in this $1000.
> Then I hear that "Chrysler sells the short blocks for $1200.00" makes me
> wonder if I need to look at that option instead?? Let us know what you
> find, I will be watching.

Than this will rilly get you thinking.

SHORT BLOCK, All Models - 4.0L93-95 $1,075.00 $860.00
Includes: Block With Pistons, Rings, Pins, Rods, Main Bearings,
Crankshaft, Camshaft Bearings, Timing Gears And Timing Chain.

SHORT BLOCK, 5.2L - 5.2L, 5.9L93-98 $3,050.00 $2,440.00
Includes: Cylinder Block With Pistons & Rings, Crankshaft,
Connecting Rods & Bearings.

http://www.chryslerpartsdirect.com/moparonline.htm

At those prices unless I was after a stroker, that would be the
solution.

Somewhere out there on the wild wild web I ran across a fully
rebuilt or stroked crate I6 for about 2,500 or so.

--
DougW

DougW

fletcher did pass the time by typing:
> Keep us posted on what you find. I have been planning on rebuilding my worn
> out 258 as my winter project. Then last night I found a free 258 that is in
> need of a rebuild as well. So now I have the luxury of building one,
> driving the other, then doing an engine swap at my discretion. I am in
> about the same phase you are, looking at $350ish for a rebuild kit,
> performance cam for $150ish, have the engine balanced $150ish, some time
> getting parts machines $200ish. All of those prices are my guesses and from
> about 10 minutes with Google so I really don't know what this will cost. I
> add that up plus things that I forgot and I could easily be in this $1000.
> Then I hear that "Chrysler sells the short blocks for $1200.00" makes me
> wonder if I need to look at that option instead?? Let us know what you
> find, I will be watching.

Than this will rilly get you thinking.

SHORT BLOCK, All Models - 4.0L93-95 $1,075.00 $860.00
Includes: Block With Pistons, Rings, Pins, Rods, Main Bearings,
Crankshaft, Camshaft Bearings, Timing Gears And Timing Chain.

SHORT BLOCK, 5.2L - 5.2L, 5.9L93-98 $3,050.00 $2,440.00
Includes: Cylinder Block With Pistons & Rings, Crankshaft,
Connecting Rods & Bearings.

http://www.chryslerpartsdirect.com/moparonline.htm

At those prices unless I was after a stroker, that would be the
solution.

Somewhere out there on the wild wild web I ran across a fully
rebuilt or stroked crate I6 for about 2,500 or so.

--
DougW

DougW

fletcher did pass the time by typing:
> Keep us posted on what you find. I have been planning on rebuilding my worn
> out 258 as my winter project. Then last night I found a free 258 that is in
> need of a rebuild as well. So now I have the luxury of building one,
> driving the other, then doing an engine swap at my discretion. I am in
> about the same phase you are, looking at $350ish for a rebuild kit,
> performance cam for $150ish, have the engine balanced $150ish, some time
> getting parts machines $200ish. All of those prices are my guesses and from
> about 10 minutes with Google so I really don't know what this will cost. I
> add that up plus things that I forgot and I could easily be in this $1000.
> Then I hear that "Chrysler sells the short blocks for $1200.00" makes me
> wonder if I need to look at that option instead?? Let us know what you
> find, I will be watching.

Than this will rilly get you thinking.

SHORT BLOCK, All Models - 4.0L93-95 $1,075.00 $860.00
Includes: Block With Pistons, Rings, Pins, Rods, Main Bearings,
Crankshaft, Camshaft Bearings, Timing Gears And Timing Chain.

SHORT BLOCK, 5.2L - 5.2L, 5.9L93-98 $3,050.00 $2,440.00
Includes: Cylinder Block With Pistons & Rings, Crankshaft,
Connecting Rods & Bearings.

http://www.chryslerpartsdirect.com/moparonline.htm

At those prices unless I was after a stroker, that would be the
solution.

Somewhere out there on the wild wild web I ran across a fully
rebuilt or stroked crate I6 for about 2,500 or so.

--
DougW

Cherokee-LTD

My rebuild was $1200 plus installation... 3 yr warranty. Shop was in
Toronto, I can look it up if you're interested. 2 1/2 yrs later it still
purrs like a horny kitten.
-Brian

"cooper" <noone@home.com> wrote in message
news:2qRhc.23978$ok3.16770@nntp-post.primus.ca...
: A while ago I bought an '87 YJ with the intention of either running it in
: the winter and saving my '94 YJ from the salt, or building it into an
: offroad beast. I bought it in the summer of '01, and it... ran.
:
: It needs a new motor. The one in there now looks like spaghetti, has metal
: flakes in the oil (when it actually holds oil) and can't hold a charge for
: nothing. It sounds like a freshman band class when it's running. The
tranny
: is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
: loss where to look for a motor.
:
: I called a few shops and the prices range from 2400-2600 installed, the
: motor being around 1200. I hear of people getting a rebuilt 258 for like
500
: bucks! My goal this summer is to take care of the ol' Beater and finally
get
: it running.
:
: Where do I start looking?
:
: coop
:
:

Cherokee-LTD

My rebuild was $1200 plus installation... 3 yr warranty. Shop was in
Toronto, I can look it up if you're interested. 2 1/2 yrs later it still
purrs like a horny kitten.
-Brian

"cooper" <noone@home.com> wrote in message
news:2qRhc.23978$ok3.16770@nntp-post.primus.ca...
: A while ago I bought an '87 YJ with the intention of either running it in
: the winter and saving my '94 YJ from the salt, or building it into an
: offroad beast. I bought it in the summer of '01, and it... ran.
:
: It needs a new motor. The one in there now looks like spaghetti, has metal
: flakes in the oil (when it actually holds oil) and can't hold a charge for
: nothing. It sounds like a freshman band class when it's running. The
tranny
: is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
: loss where to look for a motor.
:
: I called a few shops and the prices range from 2400-2600 installed, the
: motor being around 1200. I hear of people getting a rebuilt 258 for like
500
: bucks! My goal this summer is to take care of the ol' Beater and finally
get
: it running.
:
: Where do I start looking?
:
: coop
:
:

Cherokee-LTD

My rebuild was $1200 plus installation... 3 yr warranty. Shop was in
Toronto, I can look it up if you're interested. 2 1/2 yrs later it still
purrs like a horny kitten.
-Brian

"cooper" <noone@home.com> wrote in message
news:2qRhc.23978$ok3.16770@nntp-post.primus.ca...
: A while ago I bought an '87 YJ with the intention of either running it in
: the winter and saving my '94 YJ from the salt, or building it into an
: offroad beast. I bought it in the summer of '01, and it... ran.
:
: It needs a new motor. The one in there now looks like spaghetti, has metal
: flakes in the oil (when it actually holds oil) and can't hold a charge for
: nothing. It sounds like a freshman band class when it's running. The
tranny
: is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
: loss where to look for a motor.
:
: I called a few shops and the prices range from 2400-2600 installed, the
: motor being around 1200. I hear of people getting a rebuilt 258 for like
500
: bucks! My goal this summer is to take care of the ol' Beater and finally
get
: it running.
:
: Where do I start looking?
:
: coop
:
:

Cherokee-LTD

My rebuild was $1200 plus installation... 3 yr warranty. Shop was in
Toronto, I can look it up if you're interested. 2 1/2 yrs later it still
purrs like a horny kitten.
-Brian

"cooper" <noone@home.com> wrote in message
news:2qRhc.23978$ok3.16770@nntp-post.primus.ca...
: A while ago I bought an '87 YJ with the intention of either running it in
: the winter and saving my '94 YJ from the salt, or building it into an
: offroad beast. I bought it in the summer of '01, and it... ran.
:
: It needs a new motor. The one in there now looks like spaghetti, has metal
: flakes in the oil (when it actually holds oil) and can't hold a charge for
: nothing. It sounds like a freshman band class when it's running. The
tranny
: is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
: loss where to look for a motor.
:
: I called a few shops and the prices range from 2400-2600 installed, the
: motor being around 1200. I hear of people getting a rebuilt 258 for like
500
: bucks! My goal this summer is to take care of the ol' Beater and finally
get
: it running.
:
: Where do I start looking?
:
: coop
:
:

Lee Ayrton

Down here in the southerly Canadian province (the one with 48 states
within it), reman shortblocks retail for about US$1200 (plus core). Add
your own head and accessories. I understand what you're thinking, though.
I recently passed on the offer for sale of a 91 Cherokee in great shape --
except the engine sounds like a dozen empty coffee cans rolling around
inside a clothes dryer. After counting on my fingers a bit I realized
that I could get it and put in a rebuilt engine and spend about US3500 on
a car worth 3K.


On Thu, 22 Apr 2004, cooper wrote:

>
> A while ago I bought an '87 YJ with the intention of either running it in
> the winter and saving my '94 YJ from the salt, or building it into an
> offroad beast. I bought it in the summer of '01, and it... ran.
>
> It needs a new motor. The one in there now looks like spaghetti, has metal
> flakes in the oil (when it actually holds oil) and can't hold a charge for
> nothing. It sounds like a freshman band class when it's running. The tranny
> is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
> loss where to look for a motor.
>
> I called a few shops and the prices range from 2400-2600 installed, the
> motor being around 1200. I hear of people getting a rebuilt 258 for like 500
> bucks! My goal this summer is to take care of the ol' Beater and finally get
> it running.
>
> Where do I start looking?
>
> coop
>
>
>

Lee Ayrton

Down here in the southerly Canadian province (the one with 48 states
within it), reman shortblocks retail for about US$1200 (plus core). Add
your own head and accessories. I understand what you're thinking, though.
I recently passed on the offer for sale of a 91 Cherokee in great shape --
except the engine sounds like a dozen empty coffee cans rolling around
inside a clothes dryer. After counting on my fingers a bit I realized
that I could get it and put in a rebuilt engine and spend about US3500 on
a car worth 3K.


On Thu, 22 Apr 2004, cooper wrote:

>
> A while ago I bought an '87 YJ with the intention of either running it in
> the winter and saving my '94 YJ from the salt, or building it into an
> offroad beast. I bought it in the summer of '01, and it... ran.
>
> It needs a new motor. The one in there now looks like spaghetti, has metal
> flakes in the oil (when it actually holds oil) and can't hold a charge for
> nothing. It sounds like a freshman band class when it's running. The tranny
> is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
> loss where to look for a motor.
>
> I called a few shops and the prices range from 2400-2600 installed, the
> motor being around 1200. I hear of people getting a rebuilt 258 for like 500
> bucks! My goal this summer is to take care of the ol' Beater and finally get
> it running.
>
> Where do I start looking?
>
> coop
>
>
>

Lee Ayrton

Down here in the southerly Canadian province (the one with 48 states
within it), reman shortblocks retail for about US$1200 (plus core). Add
your own head and accessories. I understand what you're thinking, though.
I recently passed on the offer for sale of a 91 Cherokee in great shape --
except the engine sounds like a dozen empty coffee cans rolling around
inside a clothes dryer. After counting on my fingers a bit I realized
that I could get it and put in a rebuilt engine and spend about US3500 on
a car worth 3K.


On Thu, 22 Apr 2004, cooper wrote:

>
> A while ago I bought an '87 YJ with the intention of either running it in
> the winter and saving my '94 YJ from the salt, or building it into an
> offroad beast. I bought it in the summer of '01, and it... ran.
>
> It needs a new motor. The one in there now looks like spaghetti, has metal
> flakes in the oil (when it actually holds oil) and can't hold a charge for
> nothing. It sounds like a freshman band class when it's running. The tranny
> is smooth, brakes are new, new cat (universal) and exhaust... but I'm at a
> loss where to look for a motor.
>
> I called a few shops and the prices range from 2400-2600 installed, the
> motor being around 1200. I hear of people getting a rebuilt 258 for like 500
> bucks! My goal this summer is to take care of the ol' Beater and finally get
> it running.
>
> Where do I start looking?
>
> coop
>
>
>