OME shocks and Bar pins
06-15-2004, 05:42 PM
#1
Guest
Posts: n/a
OME shocks and Bar pins
2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
with these shocks do about the clips failing? I'm considering getting the
clips put back on and welding some kind of stop to the bar or a stack of
washers or something...
Anybody else have this problem?
Thanx
with these shocks do about the clips failing? I'm considering getting the
clips put back on and welding some kind of stop to the bar or a stack of
washers or something...
Anybody else have this problem?
Thanx
06-15-2004, 05:59 PM
#2
Guest
Posts: n/a
Re: OME shocks and Bar pins
What are you working on? Some very old Jeeps use a cotter key,
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 05:59 PM
#3
Guest
Posts: n/a
Re: OME shocks and Bar pins
What are you working on? Some very old Jeeps use a cotter key,
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 05:59 PM
#4
Guest
Posts: n/a
Re: OME shocks and Bar pins
What are you working on? Some very old Jeeps use a cotter key,
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 05:59 PM
#5
Guest
Posts: n/a
Re: OME shocks and Bar pins
What are you working on? Some very old Jeeps use a cotter key,
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
which I've never had a Problem with, other than pressing the washer on
far enough to start the key. Everything else is bolted.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 06:26 PM
#6
Guest
Posts: n/a
Re: OME shocks and Bar pins
You are telling us you have the wrong shocks in there.
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 06:26 PM
#7
Guest
Posts: n/a
Re: OME shocks and Bar pins
You are telling us you have the wrong shocks in there.
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 06:26 PM
#8
Guest
Posts: n/a
Re: OME shocks and Bar pins
You are telling us you have the wrong shocks in there.
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 06:26 PM
#9
Guest
Posts: n/a
Re: OME shocks and Bar pins
You are telling us you have the wrong shocks in there.
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
Shocks should 'never' pin out either on the up or down movement. If
they do, the bump stops are too short or the shock travel is too short.
Either way just be thankful it is only snapping the bar pins, not
breaking off chunks of frame or the whole shock mount like it 'can' do.
You really need to get the right size parts in there.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Warren Quin wrote:
>
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
06-15-2004, 06:59 PM
#10
Guest
Posts: n/a
Re: OME shocks and Bar pins
Are your shocks long enough?
Warren Quin wrote:
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
Warren Quin wrote:
> 2 Months, 2 bar pin clips and I'm ready to kill. What all does everybody
> with these shocks do about the clips failing? I'm considering getting the
> clips put back on and welding some kind of stop to the bar or a stack of
> washers or something...
>
> Anybody else have this problem?
>
> Thanx
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________