Oil Leak resulting from motor mount repl.
01-20-2007, 07:44 PM
#21
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
The filter is almost brand new, I put it on maybe a week ago, and
obviously haven't put too many miles on it.
Carl wrote:
> Replace the filter. As a rule of thumb, unless the fitler is near new, if
> you have to remove it for some reason, go ahead and replace it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eou1u5$336$1@aioe.org...
>> In order to change the passenger side motor mount in the XJ, I had to take
>> off the oil filter and move the filter mount - now it's leaking from where
>> the filter mount meets the engine.
>> I'm assuming there's a gasket in the I probably buggered up?
>>
>> The oil pressure is now hovering just above zero on the gauge; it goes up
>> momentarily when I rev the engine but goes back down almost immediately.
>> Could this be a result of the gasket in the filter mount, or should I be
>> looking for something else?
>> Thanks guys.
>
>
--
ÐÏࡱá
obviously haven't put too many miles on it.
Carl wrote:
> Replace the filter. As a rule of thumb, unless the fitler is near new, if
> you have to remove it for some reason, go ahead and replace it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eou1u5$336$1@aioe.org...
>> In order to change the passenger side motor mount in the XJ, I had to take
>> off the oil filter and move the filter mount - now it's leaking from where
>> the filter mount meets the engine.
>> I'm assuming there's a gasket in the I probably buggered up?
>>
>> The oil pressure is now hovering just above zero on the gauge; it goes up
>> momentarily when I rev the engine but goes back down almost immediately.
>> Could this be a result of the gasket in the filter mount, or should I be
>> looking for something else?
>> Thanks guys.
>
>
--
ÐÏࡱá
01-20-2007, 07:52 PM
#22
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
You can try lubing the seal again and re-installing the filter.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
01-20-2007, 07:52 PM
#23
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
You can try lubing the seal again and re-installing the filter.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
01-20-2007, 07:52 PM
#24
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
You can try lubing the seal again and re-installing the filter.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
01-20-2007, 07:52 PM
#25
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
You can try lubing the seal again and re-installing the filter.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eoud27$piq$1@aioe.org...
> The filter is almost brand new, I put it on maybe a week ago, and
> obviously haven't put too many miles on it.
>
> Carl wrote:
>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>> you have to remove it for some reason, go ahead and replace it.
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eou1u5$336$1@aioe.org...
>>> In order to change the passenger side motor mount in the XJ, I had to
>>> take off the oil filter and move the filter mount - now it's leaking
>>> from where the filter mount meets the engine.
>>> I'm assuming there's a gasket in the I probably buggered up?
>>>
>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>> up momentarily when I rev the engine but goes back down almost
>>> immediately. Could this be a result of the gasket in the filter mount,
>>> or should I be looking for something else?
>>> Thanks guys.
>>
>>
>
> --
> ÐÏࡱá
01-20-2007, 08:32 PM
#26
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
Yeah I'm gonna try that tomorrow before I go to the store for a new seal.
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
01-20-2007, 08:32 PM
#27
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
Yeah I'm gonna try that tomorrow before I go to the store for a new seal.
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
01-20-2007, 08:32 PM
#28
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
Yeah I'm gonna try that tomorrow before I go to the store for a new seal.
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
01-20-2007, 08:32 PM
#29
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
Yeah I'm gonna try that tomorrow before I go to the store for a new seal.
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
Carl wrote:
> You can try lubing the seal again and re-installing the filter.
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eoud27$piq$1@aioe.org...
>> The filter is almost brand new, I put it on maybe a week ago, and
>> obviously haven't put too many miles on it.
>>
>> Carl wrote:
>>> Replace the filter. As a rule of thumb, unless the fitler is near new, if
>>> you have to remove it for some reason, go ahead and replace it.
>>>
>>> Carl
>>>
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eou1u5$336$1@aioe.org...
>>>> In order to change the passenger side motor mount in the XJ, I had to
>>>> take off the oil filter and move the filter mount - now it's leaking
>>>> from where the filter mount meets the engine.
>>>> I'm assuming there's a gasket in the I probably buggered up?
>>>>
>>>> The oil pressure is now hovering just above zero on the gauge; it goes
>>>> up momentarily when I rev the engine but goes back down almost
>>>> immediately. Could this be a result of the gasket in the filter mount,
>>>> or should I be looking for something else?
>>>> Thanks guys.
>>>
>> --
>> ÐÏࡱá
>
>
--
ÐÏࡱá
01-21-2007, 01:05 AM
#30
Guest
Posts: n/a
Re: Oil Leak resulting from motor mount repl.
On Sat, 20 Jan 2007 20:32:21 -0500, The Merg wrote:
> Yeah I'm gonna try that tomorrow before I go to the store for a new seal.
Don't know about yours, but both my 88 and my son's 91 has 3 O-rings in
that adapter assembly: 2 in the base that mounts to the block and one on
the hollow bolt that holds it on. Make sure you get them all and use a
film of oil to lube them so that they can slip a bit as you compress them.
--
Will Honea <whonea@yahoo.com>
> Yeah I'm gonna try that tomorrow before I go to the store for a new seal.
Don't know about yours, but both my 88 and my son's 91 has 3 O-rings in
that adapter assembly: 2 in the base that mounts to the block and one on
the hollow bolt that holds it on. Make sure you get them all and use a
film of oil to lube them so that they can slip a bit as you compress them.
--
Will Honea <whonea@yahoo.com>