Oil-filter removal (2004 Jeep Liberty)
#191
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Hi Billy Ray,
Because both tools you refer to grab the oil filter around its middle,
their "handles" are to the SIDE of the filter.
But, in a Liberty, there's no room at the SIDE of the filter to swing
the "handles".
So the tool almost needs to work from the END of the filter.
Gary
Because both tools you refer to grab the oil filter around its middle,
their "handles" are to the SIDE of the filter.
But, in a Liberty, there's no room at the SIDE of the filter to swing
the "handles".
So the tool almost needs to work from the END of the filter.
Gary
#192
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Hi Billy Ray,
Because both tools you refer to grab the oil filter around its middle,
their "handles" are to the SIDE of the filter.
But, in a Liberty, there's no room at the SIDE of the filter to swing
the "handles".
So the tool almost needs to work from the END of the filter.
Gary
Because both tools you refer to grab the oil filter around its middle,
their "handles" are to the SIDE of the filter.
But, in a Liberty, there's no room at the SIDE of the filter to swing
the "handles".
So the tool almost needs to work from the END of the filter.
Gary
#193
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Hi Billy Ray,
Because both tools you refer to grab the oil filter around its middle,
their "handles" are to the SIDE of the filter.
But, in a Liberty, there's no room at the SIDE of the filter to swing
the "handles".
So the tool almost needs to work from the END of the filter.
Gary
Because both tools you refer to grab the oil filter around its middle,
their "handles" are to the SIDE of the filter.
But, in a Liberty, there's no room at the SIDE of the filter to swing
the "handles".
So the tool almost needs to work from the END of the filter.
Gary
#194
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Gary,
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
#195
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Gary,
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
#196
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Gary,
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
#197
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Gary,
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
The tool shown in my other post will get the filter at the end.
Carl
<gcotterl@co.riverside.ca.us> wrote in message
news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
> Hi Billy Ray,
>
> Because both tools you refer to grab the oil filter around its middle,
> their "handles" are to the SIDE of the filter.
> But, in a Liberty, there's no room at the SIDE of the filter to swing
> the "handles".
> So the tool almost needs to work from the END of the filter.
>
> Gary
>
#198
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Take a sharp screwdriver, hammer it through the filter, puncturing it
and then torque it off with the screwdriver. Yes, it's that easy.
Nick
Carl wrote:
> Gary,
>
> The tool shown in my other post will get the filter at the end.
>
> Carl
>
>
> <gcotterl@co.riverside.ca.us> wrote in message
> news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
>> Hi Billy Ray,
>>
>> Because both tools you refer to grab the oil filter around its middle,
>> their "handles" are to the SIDE of the filter.
>> But, in a Liberty, there's no room at the SIDE of the filter to swing
>> the "handles".
>> So the tool almost needs to work from the END of the filter.
>>
>> Gary
>>
>
>
and then torque it off with the screwdriver. Yes, it's that easy.
Nick
Carl wrote:
> Gary,
>
> The tool shown in my other post will get the filter at the end.
>
> Carl
>
>
> <gcotterl@co.riverside.ca.us> wrote in message
> news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
>> Hi Billy Ray,
>>
>> Because both tools you refer to grab the oil filter around its middle,
>> their "handles" are to the SIDE of the filter.
>> But, in a Liberty, there's no room at the SIDE of the filter to swing
>> the "handles".
>> So the tool almost needs to work from the END of the filter.
>>
>> Gary
>>
>
>
#199
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Take a sharp screwdriver, hammer it through the filter, puncturing it
and then torque it off with the screwdriver. Yes, it's that easy.
Nick
Carl wrote:
> Gary,
>
> The tool shown in my other post will get the filter at the end.
>
> Carl
>
>
> <gcotterl@co.riverside.ca.us> wrote in message
> news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
>> Hi Billy Ray,
>>
>> Because both tools you refer to grab the oil filter around its middle,
>> their "handles" are to the SIDE of the filter.
>> But, in a Liberty, there's no room at the SIDE of the filter to swing
>> the "handles".
>> So the tool almost needs to work from the END of the filter.
>>
>> Gary
>>
>
>
and then torque it off with the screwdriver. Yes, it's that easy.
Nick
Carl wrote:
> Gary,
>
> The tool shown in my other post will get the filter at the end.
>
> Carl
>
>
> <gcotterl@co.riverside.ca.us> wrote in message
> news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
>> Hi Billy Ray,
>>
>> Because both tools you refer to grab the oil filter around its middle,
>> their "handles" are to the SIDE of the filter.
>> But, in a Liberty, there's no room at the SIDE of the filter to swing
>> the "handles".
>> So the tool almost needs to work from the END of the filter.
>>
>> Gary
>>
>
>
#200
Guest
Posts: n/a
Re: Oil-filter removal (2004 Jeep Liberty)
Take a sharp screwdriver, hammer it through the filter, puncturing it
and then torque it off with the screwdriver. Yes, it's that easy.
Nick
Carl wrote:
> Gary,
>
> The tool shown in my other post will get the filter at the end.
>
> Carl
>
>
> <gcotterl@co.riverside.ca.us> wrote in message
> news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
>> Hi Billy Ray,
>>
>> Because both tools you refer to grab the oil filter around its middle,
>> their "handles" are to the SIDE of the filter.
>> But, in a Liberty, there's no room at the SIDE of the filter to swing
>> the "handles".
>> So the tool almost needs to work from the END of the filter.
>>
>> Gary
>>
>
>
and then torque it off with the screwdriver. Yes, it's that easy.
Nick
Carl wrote:
> Gary,
>
> The tool shown in my other post will get the filter at the end.
>
> Carl
>
>
> <gcotterl@co.riverside.ca.us> wrote in message
> news:1156901726.653733.52440@m73g2000cwd.googlegro ups.com...
>> Hi Billy Ray,
>>
>> Because both tools you refer to grab the oil filter around its middle,
>> their "handles" are to the SIDE of the filter.
>> But, in a Liberty, there's no room at the SIDE of the filter to swing
>> the "handles".
>> So the tool almost needs to work from the END of the filter.
>>
>> Gary
>>
>
>