Oil Filter Info
#71
Guest
Posts: n/a
Re: Oil Filter Info
I did the "chop job" on a couple of MoPar filters and did not like
what I found. Besides, around my world you can only get them at the
dealer and they have become a little too condescending unless you are
a commercial shop account. The "walk in" counter is manned by "the
new guy" that is about 20 and loves "ricers". I have to resort to
pointing to the part on the monitor and saying "Looks like # 17".
Sheesh...
Good Luck, Bruce
#72
Guest
Posts: n/a
Re: Oil Filter Info
I did the "chop job" on a couple of MoPar filters and did not like
what I found. Besides, around my world you can only get them at the
dealer and they have become a little too condescending unless you are
a commercial shop account. The "walk in" counter is manned by "the
new guy" that is about 20 and loves "ricers". I have to resort to
pointing to the part on the monitor and saying "Looks like # 17".
Sheesh...
Good Luck, Bruce
#73
Guest
Posts: n/a
Re: Oil Filter Info
I did the "chop job" on a couple of MoPar filters and did not like
what I found. Besides, around my world you can only get them at the
dealer and they have become a little too condescending unless you are
a commercial shop account. The "walk in" counter is manned by "the
new guy" that is about 20 and loves "ricers". I have to resort to
pointing to the part on the monitor and saying "Looks like # 17".
Sheesh...
Good Luck, Bruce
#74
Guest
Posts: n/a
Re: Oil Filter Info
I heard that Mopar was Wix. Don't know if this is still true.
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
#75
Guest
Posts: n/a
Re: Oil Filter Info
I heard that Mopar was Wix. Don't know if this is still true.
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
#76
Guest
Posts: n/a
Re: Oil Filter Info
I heard that Mopar was Wix. Don't know if this is still true.
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
#77
Guest
Posts: n/a
Re: Oil Filter Info
I heard that Mopar was Wix. Don't know if this is still true.
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
Earle
"FrankW" <fworm@norpak.ca> wrote in message
news:BqydnbnVt_kZFE3YnZ2dnUVZ_rPinZ2d@magma.ca...
> What about Mopar??? Nobody mentioned Mopar
> That's what I always buy.
> They're really not that expensive either.
> Jeepers
>
> Highcountry wrote:
> > I am new around this discussion, so forgive me if this information has
> > alreay made the rounds.
> >
> > Whenever I am around car people, folks are always arguing about oil
> > filters. If you have an interest in learning more than you ever
> > wanted to know, spend some time (lot's of time) reading this post and
> > following it's linked pages!
> >
> > http://minimopar.knizefamily.net/oil...y-updates.html
> >
> > If you will follow this fellows suggestions about chopping up a few
> > samples, you will be a believer! And you will NEVER go to one of
> > those "oil changer" places or Wally-Mart automotive again!
> >
> > Good Reading, Bruce
> >
>
#78
Guest
Posts: n/a
Re: Oil Filter Info
The Red Chinese Slave Labor factories will now build stuff to whatever specs
you are willing to pay for.
With auto parts that is generally the lowest possible price but not always.
In many respects the Red Chinese version of the XJ was superior to our own.
(Not that I like buying things from our only remaining major enemy.)
"Highcountry" <highcountry2000@hotmail.com> wrote in message
news:1171291564.777459.36380@s48g2000cws.googlegro ups.com...
>
> Well, just "dumb observation" on my part has told me that the
> Motorcraft is doing what I want it to do. I change my oil when when
> I can't read the "Add" mark on the dipstick, so filtration is not as
> critical as the "dry start" and the Motorcraft cured that problem.
>
> As an side comment, I recently noticed that a lot of the Wix and NAPA
> filters are now made in China. That is the "death knell" for them in
> my book.
>
> Thanks, Bruce
>
you are willing to pay for.
With auto parts that is generally the lowest possible price but not always.
In many respects the Red Chinese version of the XJ was superior to our own.
(Not that I like buying things from our only remaining major enemy.)
"Highcountry" <highcountry2000@hotmail.com> wrote in message
news:1171291564.777459.36380@s48g2000cws.googlegro ups.com...
>
> Well, just "dumb observation" on my part has told me that the
> Motorcraft is doing what I want it to do. I change my oil when when
> I can't read the "Add" mark on the dipstick, so filtration is not as
> critical as the "dry start" and the Motorcraft cured that problem.
>
> As an side comment, I recently noticed that a lot of the Wix and NAPA
> filters are now made in China. That is the "death knell" for them in
> my book.
>
> Thanks, Bruce
>
#79
Guest
Posts: n/a
Re: Oil Filter Info
The Red Chinese Slave Labor factories will now build stuff to whatever specs
you are willing to pay for.
With auto parts that is generally the lowest possible price but not always.
In many respects the Red Chinese version of the XJ was superior to our own.
(Not that I like buying things from our only remaining major enemy.)
"Highcountry" <highcountry2000@hotmail.com> wrote in message
news:1171291564.777459.36380@s48g2000cws.googlegro ups.com...
>
> Well, just "dumb observation" on my part has told me that the
> Motorcraft is doing what I want it to do. I change my oil when when
> I can't read the "Add" mark on the dipstick, so filtration is not as
> critical as the "dry start" and the Motorcraft cured that problem.
>
> As an side comment, I recently noticed that a lot of the Wix and NAPA
> filters are now made in China. That is the "death knell" for them in
> my book.
>
> Thanks, Bruce
>
you are willing to pay for.
With auto parts that is generally the lowest possible price but not always.
In many respects the Red Chinese version of the XJ was superior to our own.
(Not that I like buying things from our only remaining major enemy.)
"Highcountry" <highcountry2000@hotmail.com> wrote in message
news:1171291564.777459.36380@s48g2000cws.googlegro ups.com...
>
> Well, just "dumb observation" on my part has told me that the
> Motorcraft is doing what I want it to do. I change my oil when when
> I can't read the "Add" mark on the dipstick, so filtration is not as
> critical as the "dry start" and the Motorcraft cured that problem.
>
> As an side comment, I recently noticed that a lot of the Wix and NAPA
> filters are now made in China. That is the "death knell" for them in
> my book.
>
> Thanks, Bruce
>
#80
Guest
Posts: n/a
Re: Oil Filter Info
The Red Chinese Slave Labor factories will now build stuff to whatever specs
you are willing to pay for.
With auto parts that is generally the lowest possible price but not always.
In many respects the Red Chinese version of the XJ was superior to our own.
(Not that I like buying things from our only remaining major enemy.)
"Highcountry" <highcountry2000@hotmail.com> wrote in message
news:1171291564.777459.36380@s48g2000cws.googlegro ups.com...
>
> Well, just "dumb observation" on my part has told me that the
> Motorcraft is doing what I want it to do. I change my oil when when
> I can't read the "Add" mark on the dipstick, so filtration is not as
> critical as the "dry start" and the Motorcraft cured that problem.
>
> As an side comment, I recently noticed that a lot of the Wix and NAPA
> filters are now made in China. That is the "death knell" for them in
> my book.
>
> Thanks, Bruce
>
you are willing to pay for.
With auto parts that is generally the lowest possible price but not always.
In many respects the Red Chinese version of the XJ was superior to our own.
(Not that I like buying things from our only remaining major enemy.)
"Highcountry" <highcountry2000@hotmail.com> wrote in message
news:1171291564.777459.36380@s48g2000cws.googlegro ups.com...
>
> Well, just "dumb observation" on my part has told me that the
> Motorcraft is doing what I want it to do. I change my oil when when
> I can't read the "Add" mark on the dipstick, so filtration is not as
> critical as the "dry start" and the Motorcraft cured that problem.
>
> As an side comment, I recently noticed that a lot of the Wix and NAPA
> filters are now made in China. That is the "death knell" for them in
> my book.
>
> Thanks, Bruce
>