Oh boy... what fun. :)
#11
Guest
Posts: n/a
Re: Oh boy... what fun. :)
Made in Red China?
"DougW" <post.replies@invalid.address> wrote in message
news:EZzMg.10199$JR5.605@dukeread11...
> billy ray wrote:
>> What are you going to do with the $449. you saved?
>
> Probably blow it all on new tools that don't shatter
> when I use them. :)
> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
>
>
>> How does it rate on your beer scale?
>
> Tecnically it's a very easy job. Just bolts
> and having a banding clamp tool. But those
> bolts are a PITA so I would rate it about
> three beers. Two if you have an air wrench
> or strong arms.
>
>
> --
> DougW
>
"DougW" <post.replies@invalid.address> wrote in message
news:EZzMg.10199$JR5.605@dukeread11...
> billy ray wrote:
>> What are you going to do with the $449. you saved?
>
> Probably blow it all on new tools that don't shatter
> when I use them. :)
> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
>
>
>> How does it rate on your beer scale?
>
> Tecnically it's a very easy job. Just bolts
> and having a banding clamp tool. But those
> bolts are a PITA so I would rate it about
> three beers. Two if you have an air wrench
> or strong arms.
>
>
> --
> DougW
>
#12
Guest
Posts: n/a
Re: Oh boy... what fun. :)
Made in Red China?
"DougW" <post.replies@invalid.address> wrote in message
news:EZzMg.10199$JR5.605@dukeread11...
> billy ray wrote:
>> What are you going to do with the $449. you saved?
>
> Probably blow it all on new tools that don't shatter
> when I use them. :)
> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
>
>
>> How does it rate on your beer scale?
>
> Tecnically it's a very easy job. Just bolts
> and having a banding clamp tool. But those
> bolts are a PITA so I would rate it about
> three beers. Two if you have an air wrench
> or strong arms.
>
>
> --
> DougW
>
"DougW" <post.replies@invalid.address> wrote in message
news:EZzMg.10199$JR5.605@dukeread11...
> billy ray wrote:
>> What are you going to do with the $449. you saved?
>
> Probably blow it all on new tools that don't shatter
> when I use them. :)
> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
>
>
>> How does it rate on your beer scale?
>
> Tecnically it's a very easy job. Just bolts
> and having a banding clamp tool. But those
> bolts are a PITA so I would rate it about
> three beers. Two if you have an air wrench
> or strong arms.
>
>
> --
> DougW
>
#13
Guest
Posts: n/a
Re: Oh boy... what fun. :)
Made in Red China?
"DougW" <post.replies@invalid.address> wrote in message
news:EZzMg.10199$JR5.605@dukeread11...
> billy ray wrote:
>> What are you going to do with the $449. you saved?
>
> Probably blow it all on new tools that don't shatter
> when I use them. :)
> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
>
>
>> How does it rate on your beer scale?
>
> Tecnically it's a very easy job. Just bolts
> and having a banding clamp tool. But those
> bolts are a PITA so I would rate it about
> three beers. Two if you have an air wrench
> or strong arms.
>
>
> --
> DougW
>
"DougW" <post.replies@invalid.address> wrote in message
news:EZzMg.10199$JR5.605@dukeread11...
> billy ray wrote:
>> What are you going to do with the $449. you saved?
>
> Probably blow it all on new tools that don't shatter
> when I use them. :)
> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
>
>
>> How does it rate on your beer scale?
>
> Tecnically it's a very easy job. Just bolts
> and having a banding clamp tool. But those
> bolts are a PITA so I would rate it about
> three beers. Two if you have an air wrench
> or strong arms.
>
>
> --
> DougW
>
#14
Guest
Posts: n/a
Re: Oh boy... what fun. :)
billy ray wrote:
> Made in Red China?
Taiwan. :)
Like all qwality tools are.
Actually I have several sets of tools. Some real good craftsman/snap-on/s&k
and an assortment of crap that I don't mind loaning out. This is yet another
fine opportunity to buy some more good sockets.
> "DougW" wrote ...
>> billy ray wrote:
>>> What are you going to do with the $449. you saved?
>>
>> Probably blow it all on new tools that don't shatter
>> when I use them. :)
>> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
> Made in Red China?
Taiwan. :)
Like all qwality tools are.
Actually I have several sets of tools. Some real good craftsman/snap-on/s&k
and an assortment of crap that I don't mind loaning out. This is yet another
fine opportunity to buy some more good sockets.
> "DougW" wrote ...
>> billy ray wrote:
>>> What are you going to do with the $449. you saved?
>>
>> Probably blow it all on new tools that don't shatter
>> when I use them. :)
>> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
#15
Guest
Posts: n/a
Re: Oh boy... what fun. :)
billy ray wrote:
> Made in Red China?
Taiwan. :)
Like all qwality tools are.
Actually I have several sets of tools. Some real good craftsman/snap-on/s&k
and an assortment of crap that I don't mind loaning out. This is yet another
fine opportunity to buy some more good sockets.
> "DougW" wrote ...
>> billy ray wrote:
>>> What are you going to do with the $449. you saved?
>>
>> Probably blow it all on new tools that don't shatter
>> when I use them. :)
>> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
> Made in Red China?
Taiwan. :)
Like all qwality tools are.
Actually I have several sets of tools. Some real good craftsman/snap-on/s&k
and an assortment of crap that I don't mind loaning out. This is yet another
fine opportunity to buy some more good sockets.
> "DougW" wrote ...
>> billy ray wrote:
>>> What are you going to do with the $449. you saved?
>>
>> Probably blow it all on new tools that don't shatter
>> when I use them. :)
>> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
#16
Guest
Posts: n/a
Re: Oh boy... what fun. :)
billy ray wrote:
> Made in Red China?
Taiwan. :)
Like all qwality tools are.
Actually I have several sets of tools. Some real good craftsman/snap-on/s&k
and an assortment of crap that I don't mind loaning out. This is yet another
fine opportunity to buy some more good sockets.
> "DougW" wrote ...
>> billy ray wrote:
>>> What are you going to do with the $449. you saved?
>>
>> Probably blow it all on new tools that don't shatter
>> when I use them. :)
>> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
> Made in Red China?
Taiwan. :)
Like all qwality tools are.
Actually I have several sets of tools. Some real good craftsman/snap-on/s&k
and an assortment of crap that I don't mind loaning out. This is yet another
fine opportunity to buy some more good sockets.
> "DougW" wrote ...
>> billy ray wrote:
>>> What are you going to do with the $449. you saved?
>>
>> Probably blow it all on new tools that don't shatter
>> when I use them. :)
>> http://www.revbeergoggles.com/temp/b0rk-sockets.jpg
#17
Guest
Posts: n/a
Re: Oh boy... what fun. :)
"DougW" <post.replies@invalid.address> wrote in message
news:P1BMg.10200$JR5.2621@dukeread11...
---snippy---
>
> Actually I have several sets of tools. Some real good
craftsman/snap-on/s&k
> and an assortment of crap that I don't mind loaning out. This is yet
another
> fine opportunity to buy some more good sockets.
>
I'll remember that the next time I want to round off some bolt heads. ;^)
SK sockets used to break. Do they still do that?
Earle
news:P1BMg.10200$JR5.2621@dukeread11...
---snippy---
>
> Actually I have several sets of tools. Some real good
craftsman/snap-on/s&k
> and an assortment of crap that I don't mind loaning out. This is yet
another
> fine opportunity to buy some more good sockets.
>
I'll remember that the next time I want to round off some bolt heads. ;^)
SK sockets used to break. Do they still do that?
Earle
#18
Guest
Posts: n/a
Re: Oh boy... what fun. :)
"DougW" <post.replies@invalid.address> wrote in message
news:P1BMg.10200$JR5.2621@dukeread11...
---snippy---
>
> Actually I have several sets of tools. Some real good
craftsman/snap-on/s&k
> and an assortment of crap that I don't mind loaning out. This is yet
another
> fine opportunity to buy some more good sockets.
>
I'll remember that the next time I want to round off some bolt heads. ;^)
SK sockets used to break. Do they still do that?
Earle
news:P1BMg.10200$JR5.2621@dukeread11...
---snippy---
>
> Actually I have several sets of tools. Some real good
craftsman/snap-on/s&k
> and an assortment of crap that I don't mind loaning out. This is yet
another
> fine opportunity to buy some more good sockets.
>
I'll remember that the next time I want to round off some bolt heads. ;^)
SK sockets used to break. Do they still do that?
Earle
#19
Guest
Posts: n/a
Re: Oh boy... what fun. :)
"DougW" <post.replies@invalid.address> wrote in message
news:P1BMg.10200$JR5.2621@dukeread11...
---snippy---
>
> Actually I have several sets of tools. Some real good
craftsman/snap-on/s&k
> and an assortment of crap that I don't mind loaning out. This is yet
another
> fine opportunity to buy some more good sockets.
>
I'll remember that the next time I want to round off some bolt heads. ;^)
SK sockets used to break. Do they still do that?
Earle
news:P1BMg.10200$JR5.2621@dukeread11...
---snippy---
>
> Actually I have several sets of tools. Some real good
craftsman/snap-on/s&k
> and an assortment of crap that I don't mind loaning out. This is yet
another
> fine opportunity to buy some more good sockets.
>
I'll remember that the next time I want to round off some bolt heads. ;^)
SK sockets used to break. Do they still do that?
Earle
#20
Guest
Posts: n/a
Re: Oh boy... what fun. :)
Earle Horton wrote:
> "DougW" wrote
>> Actually I have several sets of tools. Some real good
>> craftsman/snap-on/s&k and an assortment of crap that I don't mind
>> loaning out. This is yet another fine opportunity to buy some more
>> good sockets.
>>
> I'll remember that the next time I want to round off some bolt heads.
> ;^)
I've got the perfect socket set for that and I'll even throw in the
plumbers wrench so you can rip the head right off that bolt. :)
> SK sockets used to break. Do they still do that?
I've never had an SK socket break on me, but I have twisted the ends
off several extensions and adapters with them. They are the black
(impact) type.
--
DougW
> "DougW" wrote
>> Actually I have several sets of tools. Some real good
>> craftsman/snap-on/s&k and an assortment of crap that I don't mind
>> loaning out. This is yet another fine opportunity to buy some more
>> good sockets.
>>
> I'll remember that the next time I want to round off some bolt heads.
> ;^)
I've got the perfect socket set for that and I'll even throw in the
plumbers wrench so you can rip the head right off that bolt. :)
> SK sockets used to break. Do they still do that?
I've never had an SK socket break on me, but I have twisted the ends
off several extensions and adapters with them. They are the black
(impact) type.
--
DougW