OEM or aftermarket rotors?
#44
Guest
Posts: n/a
Re: OEM or aftermarket rotors?
"James Nipper" <jnipper@nospam.fdn.com> wrote in message
news:lP6dnUbdlZ-gFq_d4p2dnA@comcast.com...
>
>
> I used solid rotors made by Raysbestos (Auto Zone etc) and they have
done
> well for me so far. Better than OEM composite stuff.
>
> good luck
>
> --James--
>
Thank you all for your replies. I am in New Zealand, so buying off the
internet is kind of tricky as most of the part store don't ship stuff from
USA to NZ. I have found a local manufacturer who makes rotors and brake
parts (www.znoelli.co.nz)
One of their reps has given me these specs for their slotted/drilled rotors
for a 01 TJ - 280mm diam, 78mm hat height, 24mm thick when new, 22.7mm min
thickness, 72mm centre hole 5 stud.
Would these rotors fit? Or should I try asking them to fit them as well (I
know they are manufacturers, whether they have installation facility I
don't know).
Thanks
TW
news:lP6dnUbdlZ-gFq_d4p2dnA@comcast.com...
>
>
> I used solid rotors made by Raysbestos (Auto Zone etc) and they have
done
> well for me so far. Better than OEM composite stuff.
>
> good luck
>
> --James--
>
Thank you all for your replies. I am in New Zealand, so buying off the
internet is kind of tricky as most of the part store don't ship stuff from
USA to NZ. I have found a local manufacturer who makes rotors and brake
parts (www.znoelli.co.nz)
One of their reps has given me these specs for their slotted/drilled rotors
for a 01 TJ - 280mm diam, 78mm hat height, 24mm thick when new, 22.7mm min
thickness, 72mm centre hole 5 stud.
Would these rotors fit? Or should I try asking them to fit them as well (I
know they are manufacturers, whether they have installation facility I
don't know).
Thanks
TW
#45
Guest
Posts: n/a
Re: OEM or aftermarket rotors?
"James Nipper" <jnipper@nospam.fdn.com> wrote in message
news:lP6dnUbdlZ-gFq_d4p2dnA@comcast.com...
>
>
> I used solid rotors made by Raysbestos (Auto Zone etc) and they have
done
> well for me so far. Better than OEM composite stuff.
>
> good luck
>
> --James--
>
Thank you all for your replies. I am in New Zealand, so buying off the
internet is kind of tricky as most of the part store don't ship stuff from
USA to NZ. I have found a local manufacturer who makes rotors and brake
parts (www.znoelli.co.nz)
One of their reps has given me these specs for their slotted/drilled rotors
for a 01 TJ - 280mm diam, 78mm hat height, 24mm thick when new, 22.7mm min
thickness, 72mm centre hole 5 stud.
Would these rotors fit? Or should I try asking them to fit them as well (I
know they are manufacturers, whether they have installation facility I
don't know).
Thanks
TW
news:lP6dnUbdlZ-gFq_d4p2dnA@comcast.com...
>
>
> I used solid rotors made by Raysbestos (Auto Zone etc) and they have
done
> well for me so far. Better than OEM composite stuff.
>
> good luck
>
> --James--
>
Thank you all for your replies. I am in New Zealand, so buying off the
internet is kind of tricky as most of the part store don't ship stuff from
USA to NZ. I have found a local manufacturer who makes rotors and brake
parts (www.znoelli.co.nz)
One of their reps has given me these specs for their slotted/drilled rotors
for a 01 TJ - 280mm diam, 78mm hat height, 24mm thick when new, 22.7mm min
thickness, 72mm centre hole 5 stud.
Would these rotors fit? Or should I try asking them to fit them as well (I
know they are manufacturers, whether they have installation facility I
don't know).
Thanks
TW
#46
Guest
Posts: n/a
Re: OEM or aftermarket rotors?
"James Nipper" <jnipper@nospam.fdn.com> wrote in message
news:lP6dnUbdlZ-gFq_d4p2dnA@comcast.com...
>
>
> I used solid rotors made by Raysbestos (Auto Zone etc) and they have
done
> well for me so far. Better than OEM composite stuff.
>
> good luck
>
> --James--
>
Thank you all for your replies. I am in New Zealand, so buying off the
internet is kind of tricky as most of the part store don't ship stuff from
USA to NZ. I have found a local manufacturer who makes rotors and brake
parts (www.znoelli.co.nz)
One of their reps has given me these specs for their slotted/drilled rotors
for a 01 TJ - 280mm diam, 78mm hat height, 24mm thick when new, 22.7mm min
thickness, 72mm centre hole 5 stud.
Would these rotors fit? Or should I try asking them to fit them as well (I
know they are manufacturers, whether they have installation facility I
don't know).
Thanks
TW
news:lP6dnUbdlZ-gFq_d4p2dnA@comcast.com...
>
>
> I used solid rotors made by Raysbestos (Auto Zone etc) and they have
done
> well for me so far. Better than OEM composite stuff.
>
> good luck
>
> --James--
>
Thank you all for your replies. I am in New Zealand, so buying off the
internet is kind of tricky as most of the part store don't ship stuff from
USA to NZ. I have found a local manufacturer who makes rotors and brake
parts (www.znoelli.co.nz)
One of their reps has given me these specs for their slotted/drilled rotors
for a 01 TJ - 280mm diam, 78mm hat height, 24mm thick when new, 22.7mm min
thickness, 72mm centre hole 5 stud.
Would these rotors fit? Or should I try asking them to fit them as well (I
know they are manufacturers, whether they have installation facility I
don't know).
Thanks
TW
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)