"nutter" Question - Again
#11
Guest
Posts: n/a
Re: "nutter" Question - Again
I'm pretty sure the nutter bypass instructions tell you exactly how to set
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#12
Guest
Posts: n/a
Re: "nutter" Question - Again
I'm pretty sure the nutter bypass instructions tell you exactly how to set
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#13
Guest
Posts: n/a
Re: "nutter" Question - Again
I'm pretty sure the nutter bypass instructions tell you exactly how to set
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#14
Guest
Posts: n/a
Re: "nutter" Question - Again
Steve Foley wrote:
> I'm pretty sure the nutter bypass instructions tell you exactly how to set
> the 'blanked off idle mixture screws'
>
> Don't know about the sol-vac. I left mine on.
Nutter Instructions dont mention setting the idle mixture screws... all
the threads i've found on setting them mention looking at the stepper
needles to see that they are in the 'middle' position. pretty difficult
since they no longer move. clarification anyone???
where is mike romain these days? does he no longer read this newsgroup.
i expect he'd be able to answer all these questions in about 30
seconds....
thanks to Steve and Earl for taking the time to anser.
bennett
#15
Guest
Posts: n/a
Re: "nutter" Question - Again
Steve Foley wrote:
> I'm pretty sure the nutter bypass instructions tell you exactly how to set
> the 'blanked off idle mixture screws'
>
> Don't know about the sol-vac. I left mine on.
Nutter Instructions dont mention setting the idle mixture screws... all
the threads i've found on setting them mention looking at the stepper
needles to see that they are in the 'middle' position. pretty difficult
since they no longer move. clarification anyone???
where is mike romain these days? does he no longer read this newsgroup.
i expect he'd be able to answer all these questions in about 30
seconds....
thanks to Steve and Earl for taking the time to anser.
bennett
#16
Guest
Posts: n/a
Re: "nutter" Question - Again
Steve Foley wrote:
> I'm pretty sure the nutter bypass instructions tell you exactly how to set
> the 'blanked off idle mixture screws'
>
> Don't know about the sol-vac. I left mine on.
Nutter Instructions dont mention setting the idle mixture screws... all
the threads i've found on setting them mention looking at the stepper
needles to see that they are in the 'middle' position. pretty difficult
since they no longer move. clarification anyone???
where is mike romain these days? does he no longer read this newsgroup.
i expect he'd be able to answer all these questions in about 30
seconds....
thanks to Steve and Earl for taking the time to anser.
bennett
#17
Guest
Posts: n/a
Re: "nutter" Question - Again
Steve Foley wrote:
> I'm pretty sure the nutter bypass instructions tell you exactly how to set
> the 'blanked off idle mixture screws'
>
> Don't know about the sol-vac. I left mine on.
Nutter Instructions dont mention setting the idle mixture screws... all
the threads i've found on setting them mention looking at the stepper
needles to see that they are in the 'middle' position. pretty difficult
since they no longer move. clarification anyone???
where is mike romain these days? does he no longer read this newsgroup.
i expect he'd be able to answer all these questions in about 30
seconds....
thanks to Steve and Earl for taking the time to anser.
bennett
#18
Guest
Posts: n/a
Re: "nutter" Question - Again
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154544018.402789.308420@s13g2000cwa.googlegr oups.com...
> Nutter Instructions dont mention setting the idle mixture screws... all
Step 2: (Step 1 says warm up the engine)
"Screw in the idle jets so that the needles that are controlled by the
stepper motor move"
I simply leaned the mixture until the RPMs dropped, and enrichened it 1/4
turn.
news:1154544018.402789.308420@s13g2000cwa.googlegr oups.com...
> Nutter Instructions dont mention setting the idle mixture screws... all
Step 2: (Step 1 says warm up the engine)
"Screw in the idle jets so that the needles that are controlled by the
stepper motor move"
I simply leaned the mixture until the RPMs dropped, and enrichened it 1/4
turn.
#19
Guest
Posts: n/a
Re: "nutter" Question - Again
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154544018.402789.308420@s13g2000cwa.googlegr oups.com...
> Nutter Instructions dont mention setting the idle mixture screws... all
Step 2: (Step 1 says warm up the engine)
"Screw in the idle jets so that the needles that are controlled by the
stepper motor move"
I simply leaned the mixture until the RPMs dropped, and enrichened it 1/4
turn.
news:1154544018.402789.308420@s13g2000cwa.googlegr oups.com...
> Nutter Instructions dont mention setting the idle mixture screws... all
Step 2: (Step 1 says warm up the engine)
"Screw in the idle jets so that the needles that are controlled by the
stepper motor move"
I simply leaned the mixture until the RPMs dropped, and enrichened it 1/4
turn.
#20
Guest
Posts: n/a
Re: "nutter" Question - Again
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154544018.402789.308420@s13g2000cwa.googlegr oups.com...
> Nutter Instructions dont mention setting the idle mixture screws... all
Step 2: (Step 1 says warm up the engine)
"Screw in the idle jets so that the needles that are controlled by the
stepper motor move"
I simply leaned the mixture until the RPMs dropped, and enrichened it 1/4
turn.
news:1154544018.402789.308420@s13g2000cwa.googlegr oups.com...
> Nutter Instructions dont mention setting the idle mixture screws... all
Step 2: (Step 1 says warm up the engine)
"Screw in the idle jets so that the needles that are controlled by the
stepper motor move"
I simply leaned the mixture until the RPMs dropped, and enrichened it 1/4
turn.