"nutter" Question - Again
#1
Guest
Posts: n/a
"nutter" Question - Again
can i get a response to these basic questions please:
1) after doing the nutter, does one need to use the blanked off idle
mixture screws to properly set the idle?
2) similiarly, does the Sol-Vac unit do anything after one has done the
nutter? can i now take it off and use it as a paperweight?
thanks in advance,
bennett
1) after doing the nutter, does one need to use the blanked off idle
mixture screws to properly set the idle?
2) similiarly, does the Sol-Vac unit do anything after one has done the
nutter? can i now take it off and use it as a paperweight?
thanks in advance,
bennett
#2
Guest
Posts: n/a
Re: "nutter" Question - Again
You should use the idle mixture screws to optimize the mixture. It may be
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#3
Guest
Posts: n/a
Re: "nutter" Question - Again
You should use the idle mixture screws to optimize the mixture. It may be
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#4
Guest
Posts: n/a
Re: "nutter" Question - Again
You should use the idle mixture screws to optimize the mixture. It may be
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#5
Guest
Posts: n/a
Re: "nutter" Question - Again
You should use the idle mixture screws to optimize the mixture. It may be
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
close now, but I would still do the mixture adjustment. Just make sure when
you are done, that both screws are within 1/4 turn of each other, otherwise
there is something wrong.
As far as the second question, I am not 100% sure, but I think that the
Sol-Vac is now completely disabled.
Chris
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
#10
Guest
Posts: n/a
Re: "nutter" Question - Again
I'm pretty sure the nutter bypass instructions tell you exactly how to set
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>
the 'blanked off idle mixture screws'
Don't know about the sol-vac. I left mine on.
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1154459378.332096.61950@p79g2000cwp.googlegro ups.com...
> can i get a response to these basic questions please:
>
> 1) after doing the nutter, does one need to use the blanked off idle
> mixture screws to properly set the idle?
> 2) similiarly, does the Sol-Vac unit do anything after one has done the
> nutter? can i now take it off and use it as a paperweight?
>
> thanks in advance,
> bennett
>