NP231 from AX5 to AX15
07-06-2005, 12:04 PM
#2
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
07-06-2005, 12:04 PM
#3
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
07-06-2005, 12:04 PM
#4
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
07-06-2005, 12:04 PM
#5
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
spline count and stickout, to mate with the AX-15's output shaft. Most or
all of the NP231s mated to an AX-5 will have the wrong part.
If you don't mind swapping this part, which involves disassembly of the
NP231, it is not such a big deal.
Earle
"reconair" <reconair@staffnet.com> wrote in message
news:11cnvj3mdnisc61@corp.supernews.com...
> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
mod?
> THX
> Scott
> 91YJ
>
>
07-06-2005, 12:10 PM
#6
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
07-06-2005, 12:10 PM
#7
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
07-06-2005, 12:10 PM
#8
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
07-06-2005, 12:10 PM
#9
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
going here.
Scott
91YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> No, unless you get real lucky. The input gear/shaft has to be the correct
> spline count and stickout, to mate with the AX-15's output shaft. Most or
> all of the NP231s mated to an AX-5 will have the wrong part.
>
> If you don't mind swapping this part, which involves disassembly of the
> NP231, it is not such a big deal.
>
> Earle
>
> "reconair" <reconair@staffnet.com> wrote in message
> news:11cnvj3mdnisc61@corp.supernews.com...
>> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> mod?
>> THX
>> Scott
>> 91YJ
>>
>>
>
>
07-06-2005, 01:37 PM
#10
Guest
Posts: n/a
Re: NP231 from AX5 to AX15
Don't give it up too soon. Replacing the input shaft is a simple job
with only a couple of gotchas that are easy enough to avoid. Since
the hard part (pulling the tc out of the vehicle) is already done,
it's a half hour to an hour job. If the AX15 model is dead anyway,
you can probably swap out the input shaft from that - all you have to
watch out for is the bearing style and gear cut.
On Wed, 6 Jul 2005 16:10:26 UTC "reconair" <reconair@staffnet.com>
wrote:
> Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
> input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
> going here.
>
> Scott
> 91YJ
> "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
> news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> > No, unless you get real lucky. The input gear/shaft has to be the correct
> > spline count and stickout, to mate with the AX-15's output shaft. Most or
> > all of the NP231s mated to an AX-5 will have the wrong part.
> >
> > If you don't mind swapping this part, which involves disassembly of the
> > NP231, it is not such a big deal.
> >
> > Earle
> >
> > "reconair" <reconair@staffnet.com> wrote in message
> > news:11cnvj3mdnisc61@corp.supernews.com...
> >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> > mod?
> >> THX
> >> Scott
> >> 91YJ
> >>
> >>
> >
> >
>
>
--
Will Honea
with only a couple of gotchas that are easy enough to avoid. Since
the hard part (pulling the tc out of the vehicle) is already done,
it's a half hour to an hour job. If the AX15 model is dead anyway,
you can probably swap out the input shaft from that - all you have to
watch out for is the bearing style and gear cut.
On Wed, 6 Jul 2005 16:10:26 UTC "reconair" <reconair@staffnet.com>
wrote:
> Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
> input verses the 23 spline input for the AX15 NP231. Darn, had a good deal
> going here.
>
> Scott
> 91YJ
> "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
> news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews...
> > No, unless you get real lucky. The input gear/shaft has to be the correct
> > spline count and stickout, to mate with the AX-15's output shaft. Most or
> > all of the NP231s mated to an AX-5 will have the wrong part.
> >
> > If you don't mind swapping this part, which involves disassembly of the
> > NP231, it is not such a big deal.
> >
> > Earle
> >
> > "reconair" <reconair@staffnet.com> wrote in message
> > news:11cnvj3mdnisc61@corp.supernews.com...
> >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a
> > mod?
> >> THX
> >> Scott
> >> 91YJ
> >>
> >>
> >
> >
>
>
--
Will Honea