NP231 from AX5 to AX15
Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a mod?
THX Scott 91YJ |
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or all of the NP231s mated to an AX-5 will have the wrong part. If you don't mind swapping this part, which involves disassembly of the NP231, it is not such a big deal. Earle "reconair" <reconair@staffnet.com> wrote in message news:11cnvj3mdnisc61@corp.supernews.com... > Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a mod? > THX > Scott > 91YJ > > |
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or all of the NP231s mated to an AX-5 will have the wrong part. If you don't mind swapping this part, which involves disassembly of the NP231, it is not such a big deal. Earle "reconair" <reconair@staffnet.com> wrote in message news:11cnvj3mdnisc61@corp.supernews.com... > Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a mod? > THX > Scott > 91YJ > > |
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or all of the NP231s mated to an AX-5 will have the wrong part. If you don't mind swapping this part, which involves disassembly of the NP231, it is not such a big deal. Earle "reconair" <reconair@staffnet.com> wrote in message news:11cnvj3mdnisc61@corp.supernews.com... > Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a mod? > THX > Scott > 91YJ > > |
Re: NP231 from AX5 to AX15
No, unless you get real lucky. The input gear/shaft has to be the correct
spline count and stickout, to mate with the AX-15's output shaft. Most or all of the NP231s mated to an AX-5 will have the wrong part. If you don't mind swapping this part, which involves disassembly of the NP231, it is not such a big deal. Earle "reconair" <reconair@staffnet.com> wrote in message news:11cnvj3mdnisc61@corp.supernews.com... > Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a mod? > THX > Scott > 91YJ > > |
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal going here. Scott 91YJ "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews... > No, unless you get real lucky. The input gear/shaft has to be the correct > spline count and stickout, to mate with the AX-15's output shaft. Most or > all of the NP231s mated to an AX-5 will have the wrong part. > > If you don't mind swapping this part, which involves disassembly of the > NP231, it is not such a big deal. > > Earle > > "reconair" <reconair@staffnet.com> wrote in message > news:11cnvj3mdnisc61@corp.supernews.com... >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a > mod? >> THX >> Scott >> 91YJ >> >> > > |
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal going here. Scott 91YJ "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews... > No, unless you get real lucky. The input gear/shaft has to be the correct > spline count and stickout, to mate with the AX-15's output shaft. Most or > all of the NP231s mated to an AX-5 will have the wrong part. > > If you don't mind swapping this part, which involves disassembly of the > NP231, it is not such a big deal. > > Earle > > "reconair" <reconair@staffnet.com> wrote in message > news:11cnvj3mdnisc61@corp.supernews.com... >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a > mod? >> THX >> Scott >> 91YJ >> >> > > |
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal going here. Scott 91YJ "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews... > No, unless you get real lucky. The input gear/shaft has to be the correct > spline count and stickout, to mate with the AX-15's output shaft. Most or > all of the NP231s mated to an AX-5 will have the wrong part. > > If you don't mind swapping this part, which involves disassembly of the > NP231, it is not such a big deal. > > Earle > > "reconair" <reconair@staffnet.com> wrote in message > news:11cnvj3mdnisc61@corp.supernews.com... >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a > mod? >> THX >> Scott >> 91YJ >> >> > > |
Re: NP231 from AX5 to AX15
Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline
input verses the 23 spline input for the AX15 NP231. Darn, had a good deal going here. Scott 91YJ "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews... > No, unless you get real lucky. The input gear/shaft has to be the correct > spline count and stickout, to mate with the AX-15's output shaft. Most or > all of the NP231s mated to an AX-5 will have the wrong part. > > If you don't mind swapping this part, which involves disassembly of the > NP231, it is not such a big deal. > > Earle > > "reconair" <reconair@staffnet.com> wrote in message > news:11cnvj3mdnisc61@corp.supernews.com... >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a > mod? >> THX >> Scott >> 91YJ >> >> > > |
Re: NP231 from AX5 to AX15
Don't give it up too soon. Replacing the input shaft is a simple job
with only a couple of gotchas that are easy enough to avoid. Since the hard part (pulling the tc out of the vehicle) is already done, it's a half hour to an hour job. If the AX15 model is dead anyway, you can probably swap out the input shaft from that - all you have to watch out for is the bearing style and gear cut. On Wed, 6 Jul 2005 16:10:26 UTC "reconair" <reconair@staffnet.com> wrote: > Thanks Earle, found the answer anyway. Seems the AX5 NP231 is a 21 spline > input verses the 23 spline input for the AX15 NP231. Darn, had a good deal > going here. > > Scott > 91YJ > "Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message > news:1120665697.480ebaa2f8b97c632710a2d24858b557@t eranews... > > No, unless you get real lucky. The input gear/shaft has to be the correct > > spline count and stickout, to mate with the AX-15's output shaft. Most or > > all of the NP231s mated to an AX-5 will have the wrong part. > > > > If you don't mind swapping this part, which involves disassembly of the > > NP231, it is not such a big deal. > > > > Earle > > > > "reconair" <reconair@staffnet.com> wrote in message > > news:11cnvj3mdnisc61@corp.supernews.com... > >> Will a NP231 T-Case from an AX5 tranny bolt to a AX-15 tranny without a > > mod? > >> THX > >> Scott > >> 91YJ > >> > >> > > > > > > -- Will Honea |
All times are GMT -4. The time now is 12:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands