From the "Not for everybody department"
#41
Guest
Posts: n/a
Re: From the "Not for everybody department"
In news:2gamsrFm8ltU1@uni-berlin.de,
Paul Calman from <spam@trap.com> was injured because:
| I'd be a lot more interested in a test where it is slammed
| into a rock at 5 MPH with the weight of a vehicle behind
it. I
| don't see many sledge hammers on the trail
As if that won't harm a standard diff cover...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
Paul Calman from <spam@trap.com> was injured because:
| I'd be a lot more interested in a test where it is slammed
| into a rock at 5 MPH with the weight of a vehicle behind
it. I
| don't see many sledge hammers on the trail
As if that won't harm a standard diff cover...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
#42
Guest
Posts: n/a
Re: From the "Not for everybody department"
In
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
#43
Guest
Posts: n/a
Re: From the "Not for everybody department"
In
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
#44
Guest
Posts: n/a
Re: From the "Not for everybody department"
In
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
#45
Guest
Posts: n/a
Re: From the "Not for everybody department"
In
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
news:o_%nc.10263$QaS.1368@news01.bloor.is.net.cabl e.rogers.com,
Cherokee-LTD from <spammenot@home.com> was injured because:
| "Joseph P" <jpribeMY@FINGERnc.rr.com> wrote in message
| news:mRTnc.11254$zq4.915212@twister.southeast.rr.c om...
while
| poking Brian's injury with a sharp stick...
|| In
||
news:5yQnc.6815$QaS.3792@news01.bloor.is.net.cable .rogers.com,
|| Cherokee-LTD from <spammenot@home.com> was injured
because:
||
||| Stumbled across this diff cover today...
||| http://tinyurl.com/29net
||| Neat idea, not too practical for off-road though. The
|| company
||| is also developing matching valve covers.
||| -Brian
||
|| Actually, you would be suprised how strong that
|| is...remember awhile back, one of the 4x4 mags did a
write
|| up on diff covers...took a 5 pound sledge hammer to each
one
|| to "test" the mettle of the covers. The
|| acrylic/polycarbonate one is the only one that about
killed
|| the testers. It sent the sledge hammer flying right back
at
|| the guys whacking away...
||
|
| I was questioning it's practicality off-road for a few
reasons.
| ...sandblasted effect.
| ...carved up from rocks.
| ...carrying a bottle of Windex around for every time you
want
| to 'inspect your gears'.
| ...and worst of all... waiting in water up to your mirrors
| while the guy in front of you checks for water in the
housing
| AFTER EVERY PUDDLE CROSSING!
|
| -Brian
I am guessing they are really intended for "show" trucks and
people that buy on impulse...
--
--
Joe Pribe
NC
Pull my finger to reply by email.
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
I Love My O|||||||O
#46
Guest
Posts: n/a
Re: From the "Not for everybody department"
> As if that won't harm a standard diff cover...
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
#47
Guest
Posts: n/a
Re: From the "Not for everybody department"
> As if that won't harm a standard diff cover...
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
#48
Guest
Posts: n/a
Re: From the "Not for everybody department"
> As if that won't harm a standard diff cover...
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
#49
Guest
Posts: n/a
Re: From the "Not for everybody department"
> As if that won't harm a standard diff cover...
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
Sure it will, A steel cover will flatten against the ring gear, then a smal
hole gets worn through it. You can bang a steel cover back unto shape, and
epoxy/solder/weld the holes. My rig came with finned aluminum covers. They
are on the garage wall, untill I find someone who wants them for street use.
--
Paul Calman, Hathaway Pines, California
#50
Guest
Posts: n/a
Re: From the "Not for everybody department"
My nomination for understatement of the year. :-)
---
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:409FE50E.BE3A960C@***.net...
> I'm probably just paranoid