new distributor Q
03-05-2005, 08:49 PM
#21
Guest
Posts: n/a
Re: new distributor Q
No, the wires are correct. As well as the little wire from the new dist. to
the coil (?).
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:VatWd.42059$Tt.24745@fed1read05...
> You got the plug wires connected up properly and in the right order? It
> can stil run and have a plug wire going to the wrong cylinder.
>
> Dave Lee wrote:
>> Hi all.
>>
>> A couple weeks back, in one operation, I replaced my Dist., the cap &
>> rotor, wires, plugs, and Crank sensor. All because it was difficult to
>> start, then wouldn't start.
>>
>> Right away I had a shudder, or periodic buck. I knew something was amis.
>> After a few days, I replaced the cap & rotor, plugs and wires with the
>> old ones. Still have the problem. I can't replace the dist., since I
>> turned in the core. The old crank sensor just plain doesn't start. Now I
>> have a small backfire too.
>>
>> Could my distributor be one notch, or spline off? I heard the computer
>> can compensate somwhat. Is it worth me exploring this? I hate to buy
>> another dist., or crank sensor, since each is about $70.
>>
>> Thanks all,
>>
>> Dave Lee
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
the coil (?).
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:VatWd.42059$Tt.24745@fed1read05...
> You got the plug wires connected up properly and in the right order? It
> can stil run and have a plug wire going to the wrong cylinder.
>
> Dave Lee wrote:
>> Hi all.
>>
>> A couple weeks back, in one operation, I replaced my Dist., the cap &
>> rotor, wires, plugs, and Crank sensor. All because it was difficult to
>> start, then wouldn't start.
>>
>> Right away I had a shudder, or periodic buck. I knew something was amis.
>> After a few days, I replaced the cap & rotor, plugs and wires with the
>> old ones. Still have the problem. I can't replace the dist., since I
>> turned in the core. The old crank sensor just plain doesn't start. Now I
>> have a small backfire too.
>>
>> Could my distributor be one notch, or spline off? I heard the computer
>> can compensate somwhat. Is it worth me exploring this? I hate to buy
>> another dist., or crank sensor, since each is about $70.
>>
>> Thanks all,
>>
>> Dave Lee
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
03-05-2005, 08:49 PM
#22
Guest
Posts: n/a
Re: new distributor Q
No, the wires are correct. As well as the little wire from the new dist. to
the coil (?).
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:VatWd.42059$Tt.24745@fed1read05...
> You got the plug wires connected up properly and in the right order? It
> can stil run and have a plug wire going to the wrong cylinder.
>
> Dave Lee wrote:
>> Hi all.
>>
>> A couple weeks back, in one operation, I replaced my Dist., the cap &
>> rotor, wires, plugs, and Crank sensor. All because it was difficult to
>> start, then wouldn't start.
>>
>> Right away I had a shudder, or periodic buck. I knew something was amis.
>> After a few days, I replaced the cap & rotor, plugs and wires with the
>> old ones. Still have the problem. I can't replace the dist., since I
>> turned in the core. The old crank sensor just plain doesn't start. Now I
>> have a small backfire too.
>>
>> Could my distributor be one notch, or spline off? I heard the computer
>> can compensate somwhat. Is it worth me exploring this? I hate to buy
>> another dist., or crank sensor, since each is about $70.
>>
>> Thanks all,
>>
>> Dave Lee
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
the coil (?).
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:VatWd.42059$Tt.24745@fed1read05...
> You got the plug wires connected up properly and in the right order? It
> can stil run and have a plug wire going to the wrong cylinder.
>
> Dave Lee wrote:
>> Hi all.
>>
>> A couple weeks back, in one operation, I replaced my Dist., the cap &
>> rotor, wires, plugs, and Crank sensor. All because it was difficult to
>> start, then wouldn't start.
>>
>> Right away I had a shudder, or periodic buck. I knew something was amis.
>> After a few days, I replaced the cap & rotor, plugs and wires with the
>> old ones. Still have the problem. I can't replace the dist., since I
>> turned in the core. The old crank sensor just plain doesn't start. Now I
>> have a small backfire too.
>>
>> Could my distributor be one notch, or spline off? I heard the computer
>> can compensate somwhat. Is it worth me exploring this? I hate to buy
>> another dist., or crank sensor, since each is about $70.
>>
>> Thanks all,
>>
>> Dave Lee
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
56
05-18-2004 11:34 PM
DougW
Jeep Mailing List
16
09-07-2003 06:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)