new bumper
#41
Guest
Posts: n/a
Re: new bumper
You must have a chop saw.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> Don't ya hate that....spend 10hours on something....only to finish it and
> have it look like something that took an hour at most!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SB wrote:
>
> Don't ya hate that....spend 10hours on something....only to finish it and
> have it look like something that took an hour at most!
#42
Guest
Posts: n/a
Re: new bumper
Link's not fead, I was just there!
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#43
Guest
Posts: n/a
Re: new bumper
Link's not fead, I was just there!
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#44
Guest
Posts: n/a
Re: new bumper
Link's not fead, I was just there!
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#45
Guest
Posts: n/a
Re: new bumper
Link's not fead, I was just there!
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#46
Guest
Posts: n/a
Re: new bumper
Dead
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#47
Guest
Posts: n/a
Re: new bumper
Dead
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#48
Guest
Posts: n/a
Re: new bumper
Dead
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#49
Guest
Posts: n/a
Re: new bumper
Dead
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
"SB" <chicbearsmook@hotmail.com> wrote in message
news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> that's a dead link rich!
>
>
> "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > Try this link. They have some pretty good ideas. I've been thinking of
> > building one myself. http://www.jeepfabrication.com/
> > Rich
> >
> > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > news:Haojc.3787$6L3.2467@fed1read05...
> > > I'd be interested in photos of your hinge arrangement catch
> > > mechanism, if you're in the mood to share, I have my hinge
> > > figured out, but since it is not done, yours might be
> > > better, and I have not come close to deciding how I want to
> > > do my latch.
> > >
> > > I like seeing other people's takes on the project. The front
> > > was easy, but the swing away seems to be one project that I
> > > keep delaying because I don't want to forget something.
> > >
> > > Looks great though, what kind of finish are you going with?
> > > I went with a hammered finish through the gun on my front. I
> > > am going to strip it in July, and re-do it with a homemade
> > > "bake-box" when the 120* weather hits
> > >
> > >
> > > Thanks in advance for any input on the hinge/latch.
> > >
> > > JT
> > >
> > >
> > >
> > >
> > > "Fletcher" <no@mail.com> wrote in message
> > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > | A night of fab work and here is what I have to show for
> > > it:
> > > |
> > > | http://166.70.18.182/images/bumper.jpg
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > > |
> > >
> > >
> >
> >
>
>
#50
Guest
Posts: n/a
Re: new bumper
I'm having issues with my ISP...links there just takes forever to load.
also, don't worry about the spell checked reply corrections. Just leads to
lots of message traffic if we all do that!
"Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
news:I3Bjc.7400$4D1.5134@twister.socal.rr.com...
> Dead
> "SB" <chicbearsmook@hotmail.com> wrote in message
> news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> > that's a dead link rich!
> >
> >
> > "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> > news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > > Try this link. They have some pretty good ideas. I've been thinking of
> > > building one myself. http://www.jeepfabrication.com/
> > > Rich
> > >
> > > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > > news:Haojc.3787$6L3.2467@fed1read05...
> > > > I'd be interested in photos of your hinge arrangement catch
> > > > mechanism, if you're in the mood to share, I have my hinge
> > > > figured out, but since it is not done, yours might be
> > > > better, and I have not come close to deciding how I want to
> > > > do my latch.
> > > >
> > > > I like seeing other people's takes on the project. The front
> > > > was easy, but the swing away seems to be one project that I
> > > > keep delaying because I don't want to forget something.
> > > >
> > > > Looks great though, what kind of finish are you going with?
> > > > I went with a hammered finish through the gun on my front. I
> > > > am going to strip it in July, and re-do it with a homemade
> > > > "bake-box" when the 120* weather hits
> > > >
> > > >
> > > > Thanks in advance for any input on the hinge/latch.
> > > >
> > > > JT
> > > >
> > > >
> > > >
> > > >
> > > > "Fletcher" <no@mail.com> wrote in message
> > > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > > | A night of fab work and here is what I have to show for
> > > > it:
> > > > |
> > > > | http://166.70.18.182/images/bumper.jpg
> > > > |
> > > > |
> > > > |
> > > > |
> > > > |
> > > > |
> > > > |
> > > >
> > > >
> > >
> > >
> >
> >
>
>
also, don't worry about the spell checked reply corrections. Just leads to
lots of message traffic if we all do that!
"Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
news:I3Bjc.7400$4D1.5134@twister.socal.rr.com...
> Dead
> "SB" <chicbearsmook@hotmail.com> wrote in message
> news:FLAjc.16507$Qcs.12033@news04.bloor.is.net.cab le.rogers.com...
> > that's a dead link rich!
> >
> >
> > "Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
> > news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> > > Try this link. They have some pretty good ideas. I've been thinking of
> > > building one myself. http://www.jeepfabrication.com/
> > > Rich
> > >
> > > "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> > > news:Haojc.3787$6L3.2467@fed1read05...
> > > > I'd be interested in photos of your hinge arrangement catch
> > > > mechanism, if you're in the mood to share, I have my hinge
> > > > figured out, but since it is not done, yours might be
> > > > better, and I have not come close to deciding how I want to
> > > > do my latch.
> > > >
> > > > I like seeing other people's takes on the project. The front
> > > > was easy, but the swing away seems to be one project that I
> > > > keep delaying because I don't want to forget something.
> > > >
> > > > Looks great though, what kind of finish are you going with?
> > > > I went with a hammered finish through the gun on my front. I
> > > > am going to strip it in July, and re-do it with a homemade
> > > > "bake-box" when the 120* weather hits
> > > >
> > > >
> > > > Thanks in advance for any input on the hinge/latch.
> > > >
> > > > JT
> > > >
> > > >
> > > >
> > > >
> > > > "Fletcher" <no@mail.com> wrote in message
> > > > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > > > | A night of fab work and here is what I have to show for
> > > > it:
> > > > |
> > > > | http://166.70.18.182/images/bumper.jpg
> > > > |
> > > > |
> > > > |
> > > > |
> > > > |
> > > > |
> > > > |
> > > >
> > > >
> > >
> > >
> >
> >
>
>