new bumper
#21
Guest
Posts: n/a
Re: new bumper
I will get some better photos of the hinge, I was very happy the way it
turned out, no sag at all. I actually cheated a little bit on it and am
using a hinge that a local shop makes. It uses 2 sets of bearings on a 1
1/4" cromoly spindle. I have an idea of what I want the catch to look like,
but I have not made it yet. But the plan is a simple bolt / thumb screw
that will hold it tight to prevent rattles, and will be simple. I only have
one night left before I leave on a Moab trip, and I have tons of other
projects I need to get done before I can leave. So the pics may be a few
days away.
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
turned out, no sag at all. I actually cheated a little bit on it and am
using a hinge that a local shop makes. It uses 2 sets of bearings on a 1
1/4" cromoly spindle. I have an idea of what I want the catch to look like,
but I have not made it yet. But the plan is a simple bolt / thumb screw
that will hold it tight to prevent rattles, and will be simple. I only have
one night left before I leave on a Moab trip, and I have tons of other
projects I need to get done before I can leave. So the pics may be a few
days away.
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
#22
Guest
Posts: n/a
Re: new bumper
Try this link. They have some pretty good ideas. I've been thinking of
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
#23
Guest
Posts: n/a
Re: new bumper
Try this link. They have some pretty good ideas. I've been thinking of
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
#24
Guest
Posts: n/a
Re: new bumper
Try this link. They have some pretty good ideas. I've been thinking of
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
#25
Guest
Posts: n/a
Re: new bumper
Try this link. They have some pretty good ideas. I've been thinking of
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
building one myself. http://www.jeepfabrication.com/
Rich
"Fennidh" <bdl300wmag.@hotmail.com> wrote in message
news:Haojc.3787$6L3.2467@fed1read05...
> I'd be interested in photos of your hinge arrangement catch
> mechanism, if you're in the mood to share, I have my hinge
> figured out, but since it is not done, yours might be
> better, and I have not come close to deciding how I want to
> do my latch.
>
> I like seeing other people's takes on the project. The front
> was easy, but the swing away seems to be one project that I
> keep delaying because I don't want to forget something.
>
> Looks great though, what kind of finish are you going with?
> I went with a hammered finish through the gun on my front. I
> am going to strip it in July, and re-do it with a homemade
> "bake-box" when the 120* weather hits
>
>
> Thanks in advance for any input on the hinge/latch.
>
> JT
>
>
>
>
> "Fletcher" <no@mail.com> wrote in message
> news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> | A night of fab work and here is what I have to show for
> it:
> |
> | http://166.70.18.182/images/bumper.jpg
> |
> |
> |
> |
> |
> |
> |
>
>
#26
Guest
Posts: n/a
Re: new bumper
Don't ya hate that....spend 10hours on something....only to finish it and
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
#27
Guest
Posts: n/a
Re: new bumper
Don't ya hate that....spend 10hours on something....only to finish it and
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
#28
Guest
Posts: n/a
Re: new bumper
Don't ya hate that....spend 10hours on something....only to finish it and
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
#29
Guest
Posts: n/a
Re: new bumper
Don't ya hate that....spend 10hours on something....only to finish it and
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
have it look like something that took an hour at most!
"Fletcher" <no@mail.com> wrote in message
news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> A night of fab work and here is what I have to show for it:
>
> http://166.70.18.182/images/bumper.jpg
>
>
>
>
>
>
>
#30
Guest
Posts: n/a
Re: new bumper
that's a dead link rich!
"Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> Try this link. They have some pretty good ideas. I've been thinking of
> building one myself. http://www.jeepfabrication.com/
> Rich
>
> "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> news:Haojc.3787$6L3.2467@fed1read05...
> > I'd be interested in photos of your hinge arrangement catch
> > mechanism, if you're in the mood to share, I have my hinge
> > figured out, but since it is not done, yours might be
> > better, and I have not come close to deciding how I want to
> > do my latch.
> >
> > I like seeing other people's takes on the project. The front
> > was easy, but the swing away seems to be one project that I
> > keep delaying because I don't want to forget something.
> >
> > Looks great though, what kind of finish are you going with?
> > I went with a hammered finish through the gun on my front. I
> > am going to strip it in July, and re-do it with a homemade
> > "bake-box" when the 120* weather hits
> >
> >
> > Thanks in advance for any input on the hinge/latch.
> >
> > JT
> >
> >
> >
> >
> > "Fletcher" <no@mail.com> wrote in message
> > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > | A night of fab work and here is what I have to show for
> > it:
> > |
> > | http://166.70.18.182/images/bumper.jpg
> > |
> > |
> > |
> > |
> > |
> > |
> > |
> >
> >
>
>
"Richard Harris" <SHARRIS11nospam@san.rr.com> wrote in message
news:1Gvjc.7379$4D1.387@twister.socal.rr.com...
> Try this link. They have some pretty good ideas. I've been thinking of
> building one myself. http://www.jeepfabrication.com/
> Rich
>
> "Fennidh" <bdl300wmag.@hotmail.com> wrote in message
> news:Haojc.3787$6L3.2467@fed1read05...
> > I'd be interested in photos of your hinge arrangement catch
> > mechanism, if you're in the mood to share, I have my hinge
> > figured out, but since it is not done, yours might be
> > better, and I have not come close to deciding how I want to
> > do my latch.
> >
> > I like seeing other people's takes on the project. The front
> > was easy, but the swing away seems to be one project that I
> > keep delaying because I don't want to forget something.
> >
> > Looks great though, what kind of finish are you going with?
> > I went with a hammered finish through the gun on my front. I
> > am going to strip it in July, and re-do it with a homemade
> > "bake-box" when the 120* weather hits
> >
> >
> > Thanks in advance for any input on the hinge/latch.
> >
> > JT
> >
> >
> >
> >
> > "Fletcher" <no@mail.com> wrote in message
> > news:1injc.53011$Li3.4532@fe04.usenetserver.com...
> > | A night of fab work and here is what I have to show for
> > it:
> > |
> > | http://166.70.18.182/images/bumper.jpg
> > |
> > |
> > |
> > |
> > |
> > |
> > |
> >
> >
>
>